Quantification of carbon nanotube dispersion and its correlation with mechanical and thermal properties of epoxy nanocomposites

An experimental study is carried out to quantitatively assess the dispersion quality of carbon nanotubes (CNTs) in epoxy matrix as a function of CNT variant and weight fraction. To this end, two weight fractions (0.05% and 0.25%) of as-grown, oxidized, and functionalized CNTs are used to process CNT/epoxy nanocomposites. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared analysis of different variants of CNTs are used to establish the efficiency of purification route. While the relative change in mechanical properties is investigated through tensile and micro-hardness testing, thermal conductivity of different nanocomposites is measured to characterize the effect of CNT addition on the average thermal properties of epoxy. Later on, a quantitative analysis is carried out to establish the relationship between the observed improvements in average composite properties with the dispersion quality of CNTs in epoxy. It is shown that carboxylic (-COOH) functionalization reduces the average CNT agglomerate size and thus ensures better dispersion of CNTs in epoxy even at higher CNT weight fraction. The improved dispersion leads to enhanced interfacial interaction at the CNT/epoxy interface and hence provides higher relative improvement in nanocomposite properties compared to the samples prepared using as-grown and oxidized CNTs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48879.     

Synthesis,characterization of β-CD based novel hydrogels with dual objectives of drug release and dye removal

Iranian Polymer Journal - In our recent work, we have reported on hydrogels devoid of cross-linkers. After observing the successful swelling and water retention properties, we have introduced...     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Estimation of convective mass transfer in solar distillation systems

In this article a thermal model has been developed to determine the convective mass transfer for different Grashof Number range in solar distillatiOn process. The model is based on simple regression analysis. Based on the experimental data obtained from the rigorous outdoor experimentation on passive and active distillation systems for summer climatic conditions, the values of C and n have been calculated. The modified values of C and n for Nu=C(GrPr)ⁿ, are proposed as C=0.0322; N=0.4114 for 1.794 × 10⁶6 in a passive solar still and C=0.0538; N=0.383 for 5.498 × 10⁶6 in an active solar still. The percentage deviation between experimental and theoretical results are found within an accuracy of 12%.     

Fibrolytic potential of anaerobic fungi (Piromyces sp.) isolated from wild cattle and blue bulls in pure culture and effect of their addition on in vitro fermentation of wheat straw and methane emission by rumen fluid of buffaloes

BACKGROUND: Ten isolates of anaerobic fungi of Piromyces genus from wild cattle and blue bulls (five isolates from each host species) were evaluated for their fibrolytic ability in pure culture, their suitability for use as a microbial additive in buffaloes and their effect on methane emission. RESULTS: In pure culture, only two out of five isolates from wild cattle degraded wheat straw efficiently, whereas all five isolates from wild blue bulls did. Isolate CF1 (from cattle) showed the highest apparent digestibility (53.4%), true digestibility (70.8%) and neutral detergent fibre digestibility (75.0%) of wheat straw after 5 days of incubation. When added to buffalo rumen fluid, all five isolates from cattle increased (P < 0.05) in vitro apparent digestibility of wheat straw compared with the control (received autoclaved culture), but all five isolates from blue bulls failed to influence in vitro digestibility of wheat straw. Isolate CF1 showed the highest stimulating effect on straw digestion by buffalo rumen fluid microbes and increased apparent digestibility (51.9 vs 29.4%, P < 0.05), true digestibility (57.9 vs 36.5%, P < 0.05) and neutral detergent fibre digestibility (51.5 vs 26.9%, P < 0.05) of wheat straw compared with the control after 24 h of fermentation. There were also significant increases in fungal count and enzyme activities of carboxymethylcellulase and xylanase in the CF1‐added group compared with the control group. Gas and methane production g^?1 truly digested dry matter of straw were comparable among all groups including the control. CONCLUSION: Wild cattle and blue bulls harbour some anaerobic fungal strains with strong capability to hydrolyse fibre. The fungal isolate CF1 has high potential for use as a microbial feed additive in buffaloes to improve digestibility of fibrous feeds without increasing methane emission per unit of digested feed. Copyright © 2010 Society of Chemical Industry     

Photochemistry on a polarisable semi-conductor: what do we understand today?

The continued development of ferroelectric materials into more and more consumer led applications has been at the forefront of recent ferroelectric material research. It is, however, possible to view a ferroelectric as a wide band gap semi-conductor that can sustain a surface charge density. This charge density arises from the movement of ions in the crystal lattice and the need to compensate for this charge. When viewing ferroelectrics as polarisable semi-conductors a large number of new interactions are possible. One such is the use of super band gap illumination to generate electron–hole pairs. These photogenerated carriers can then perform local electrochemistry. What is most interesting for ferroelectric materials is that the REDOX chemistry can be chosen by selectively modifying the domain structure of the ferroelectric—we can perform oxidation and reduction on the surface of the same material at spatially separate locations, or use the material to drive photoexcited carriers apart. This means we can separate the REDOX products or produce patterns of photogenerated material in places we have predetermined. This review aims to introduce the background research that has led to the current understanding as well a highlight some of the current areas that require further development.     

Failure Analysis of AISI 440C Steel Ball Screws Used in the Actuator System of a Satellite Launch Vehicle

In view of its excellent wear and corrosion resistance, AISI 440C steel is the material of choice for the fabrication of ball screws used in actuator systems of satellite launch vehicles. During the routine acceptance test of a ball screw, longitudinal cracks were observed at the shaft location of the ball screw. The optical microstructure of the ball screw material (AISI 440C) revealed the presence of aligned carbides (carbide banding). Fractographic observations revealed the cracking to be along the carbide bands. Based on detailed optical and scanning electron microscopic observations, the cracking of the ball screws was attributed to the carbide bands.