Planning Belgian Congo’s network of medical infrastructure: type-plans as tools to construct a medical model-colony, 1949–1959

ABSTRACT

Throughout the 1950s, the Belgian colonial government constructed a vast network of hospital infrastructure as part of its Ten-Year Plan, a colony-wide socio-economic scheme emblematic for the era of ‘welfare colonialism.’ This network played a key role in Belgian colonialism, by providing healthcare, but also by boosting labour productivity, facilitating state presence and control, and by advertising Congo as a medical model-colony. In this article, we unpack the extensive administrative apparatus that was necessary to buttress this ambitious building programme, and we highlight type-plans as crucial government tools to construct such a vast network of healthcare infrastructure. At first glance, the use of type-plans confirms classic characterizations of the Belgian colonial government as an omnipotent and technocratic state apparatus that implemented large, top-down government plans through authoritative methods, often discarding local realities. However, tracing hospital construction on the ground reveals that type-plans did not function as immutable models, but rather as modular blueprints that allowed local administrations to adapt hospitals to local needs and contingencies. As such, our article illustrates how, facilitated by surprisingly flexible type-plans, everyday colonial policymaking in Belgian Congo was, contrary to the still dominant discourse, deeply reliant on the agency and aptitude of local officials.     

Aeration and gutter water levels in siphonic roof drainage systems

An investigation is presented into how negative system pressures, the degree of aeration, and gutter water levels are affected by the number of outlets in a siphonic roof drainage system. The experimental results show that system pressures decrease if outlets are blocked. It is also shown that the depth of water above an outlet is strongly influenced by the negative pressure acting at the outlet. As the suction effect at the outlet increases, due to lower system pressures, more water and air will be drawn into the outlets and this will result in a corresponding increase in overall gutter water depth. The results also show that there is often built-in redundancy in multiple outlet siphonic systems experiencing lower-intensity rainfall events, and if one or two outlets were blocked, the system would still operate satisfactorily. A new outlet suppressor was trialled and this was shown to reduce gutter water levels by up to 58% at some positions in the gutter.

Il est présenté une enquête sur la manière dont les pressions négatives dans le système concerné, le degré d'aération et les niveaux d'eau dans les chéneaux sont affectés par le nombre d'orifices de sortie dans un système d'écoulement des eaux de toit par siphonnage. Les résultats expérimentaux montrent que les pressions dans le système diminuent si des orifices de sortie sont obturés. Il est également montré que la profondeur de l'eau au-dessus d'un orifice de sortie est fortement influencée par la pression négative s'exerçant à l'orifice de sortie. Plus l'effet de succion à l'orifice de sortie augmente, en raison des pressions plus faibles dans le système, et plus les quantités d'air et d'eau entraînées dans les orifices de sortie seront importantes, et cela aura pour résultat une augmentation correspondante de la profondeur générale de l'eau dans les chéneaux. Les résultats montrent également qu'il existe souvent une redondance intégrée dans les systèmes à siphons comportant des orifices de sortie multiples et soumis à des épisodes pluvieux de faible intensité, et que si un ou deux orifices de sortie sont obturés, le système fonctionne encore de manière satisfaisante. Un nouvel obturateur d'orifice de sortie a été essayé, ce qui a permis de montrer que celui-ci réduit dans une proportion allant jusqu'à 58 % en certains points les niveaux d'eau dans les chéneaux.

Mots clés: aération, niveaux d'eau dans les chéneaux, pressions négatives, écoulement des eaux de toit par siphonnage     

High-refractive quinolinone-based polymers for ophthalmic devices

Seven novel high refractive index (HRI) acrylic monomers, comprising the quinolinone structural motive, have been synthesized and characterized. Cross-linked homo- as well as copolymers were prepared by photochemical bulk polymerization. The homopolymers show refractive indices at 589 nm (n ₅₈₉) ranging from 1.60 up to 1.68, glass transition temperatures (T _g) from 52 to 76 °C, and Abbe numbers (ν _Abbe) of 19 to 25. Due to these parameters, the homopolymers are not suitable to be used directly for intraocular lens (IOL) manufacture, but the quinolinone monomers may be used as high refractive index components in copolymers. Potential mixtures were calculated theoretically and one example, a copolymer with PEA and PEGPEA, was prepared and characterized. The experimentally found values were T _g?=?24 °C, n ₅₈₉?=?1.593, and ν _Abbe?=?28.3. Interestingly, the quinolinone compound which does not have any spacer between the polymerizable group and the high refractive index group appears to be the most useful one. The lightfastness of the new material fulfills the demands for IOLs. Quinolinone derivatives are promising new comonomers for high refractive index copolymers.     

Strategy for robot motion and path planning in robot taping

Covering objects with masking tapes is a common process for surface protection in processes like spray painting, plasma spraying, shot peening, etc. Manual taping is tedious and takes a lot of effort of the workers. The taping process is a special process which requires correct surface covering strategy and proper attachment of the masking tape for an efficient surface protection. We have introduced an automatic robot taping system consisting of a robot manipulator, a rotating platform, a 3D scanner and specially designed taping end-effectors. This paper mainly talks about the surface covering strategies for different classes of geometries. The methods and corresponding taping tools are introduced for taping of following classes of surfaces: Cylindrical/extended surfaces, freeform surfaces with no grooves, surfaces with grooves, and rotational symmetrical surfaces. A collision avoidance algorithm is introduced for the robot taping manipulation. With further improvements on segmenting surfaces of taping parts and tape cutting mechanisms, such taping solution with the taping tool and the taping methodology can be combined as a very useful and practical taping package to assist humans in this tedious and time costly work.     

A conceptual model of riparian forest restoration for natural flood management

There is an increasing emphasis on using natural processes, including riparian forest restoration, to enhance the ecological, hydrological and geomorphological functioning of watercourses. However, we have insufficient knowledge on how the supply and retention of in‐channel wood from riparian forest stands changes with age, with inferences typically based on data from terrestrial forests. This presents a challenge in estimating the efficacy and functional lifespan of restoration projects. In this paper, we use a riparian forest growth model to show there is a lag of up to 40–50 years between the start of forest growth and trees delivering wood to the channel that is large enough to resist fluvial transport, anchor logjams and so increase channel complexity and hydraulic resistance. Resource managers need to account for realistic timescales over which changes promoted by riparian woodland restoration will occur and may need to consider using interim engineered logjams as the forest develops.     

Static and dynamic corrosion behavior of SnO2-doped AZS slip cast refractory in SLS glass

The corrosion behavior of a tin IV oxide-doped AZS-refractory, subject to static and dynamic corrosion testing at 1370˚C in soda-lime-silica glass, was studied considering the effect of the microstructural features on corrosion. The refractory was synthesized by slip cast methods through reaction sintering of alumina and zircon raw materials using SnO₂ as a sintering agent. SnO₂ had a considerable influence in the enhanced alumina/zircon reaction sintering and the subsequently evolved microstructures of an interlocked Zr_(1-x)Sn_(x)O₂ solid solution reinforced alumina-mullite composite. The process kinetics of the refractory corrosion followed reasonably well the predicted dependence on the square root of angular velocity under forced convection corrosion. Glass chemical corrosion and erosion of the refractory, under static and dynamic glass conditions, respectively, revealed the Zr_(1-x)Sn_(x)O₂ solid solution-rich mullite matrix as providing the most corrosion resistance and glass compatibility.     

Increased conversion efficiency in cadmium telluride photovoltaics by luminescent downshifting with quantum dot/poly(methyl methacrylate) films

Commercially available quantum dots have been encapsulated in a poly(methyl methacrylate) film and used as a luminescent downshifting layer on cadmium sulfide/cadmium telluride photovoltaic devices. Application of these films has resulted in a relative improvement to the short‐circuit current of over 4% by I–V measurement, with a significant increase in the contribution of short‐wavelength light resulting in 25% of the current available in this part of the spectrum being captured. The films have been shown to be highly scattering and the associated difficulties this provides to external quantum efficiency measurements have been discussed. A range of optical characterisation techniques, particularly laser beam induced current, have been used to probe the effect the films have on a cadmium sulfide/cadmium telluride device. An alternate methodology for performing external quantum efficiency measurements with the quantum dot films has been proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.