Anticipation of digital patterns

A memristive device is a novel passive device, which is essentially a resistor with memory. This device can be used for novel technical applications like neuromorphic computation. In this paper, we focus on anticipation—a capability of a system to decide how to react in an environment by predicting future states. Especially, we have designed an elementary memristive circuit for the anticipation of digital patterns, where this circuit is based on the capability of an amoeba to anticipate periodically occurring unipolar pulses. The resulting circuit has been verified by digital simulations and has been realized in hardware as well. For the practical realization, we have used an Ag‐doped TiO_2?x‐based memristive device, which has been fabricated in planar capacitor structures on a silicon wafer. The functionality of the circuit is shown by simulations and measurements. Finally, the anticipation of information is demonstrated by using images, where the robustness of this anticipatory circuit against noise and faulty intermediate information is visualized.     

Systemic inflammatory load in humans is suppressed by consumption of two formulations of dried,encapsulated juice concentrate

Chronic inflammation contributes to an increased risk for developing chronic conditions such as cardiovascular disease, diabetes, and cancer. A high “inflammatory load” is defined as elevated inflammation markers in blood or other tissues. We evaluated several markers of systemic inflammation from healthy adults and tested the hypothesis that two formulations of encapsulated fruit and vegetable juice powder concentrate with added berry powders (FVB) or without (FV) could impact markers of inflammatory load. Using a double‐blind, placebo‐controlled approach, 117 subjects were randomly assigned to receive placebo, FV, or FVB capsules. Blood was drawn at baseline and after 60 d of capsule consumption. We measured inflammatory markers (high sensitivity C‐Reactive Protein, Monocyte Chemotactic Protein‐1, Macrophage Inflammatory Protein 1‐β, and Regulated upon Activation, Normal T cell Expressed and Secreted), superoxide dismutase, and micronutrients (β‐carotene, vitamin C, and vitamin E). Results showed Monocyte Chemotactic Protein‐1, Macrophage Inflammatory Protein 1‐β, and RANTES levels were significantly reduced and superoxide dismutase and micronutrient levels were significantly increased in subjects consuming both FV and FVB, relative to placebo. Data suggest a potential health benefit by consuming either formulation of the encapsulated juice concentrates through their anti‐inflammatory properties.     

Novel Lyapunov-based rapid and ripple-free MPPT using a robust model reference adaptive controller for solar PV system

The technological, economic, and environmental benefits of photovoltaic (PV) systems have led to their widespread adoption in recent years as a source of electricity generation. However, precisely identifying a PV system''s maximum power point (MPP) under normal and shaded weather conditions is crucial to conserving the maximum generated power. One of the biggest concerns with a PV system is the existence of partial shading, which produces multiple peaks in the P–V characteristic curve. In these circumstances, classical maximum power point tracking (MPPT) approaches are prone to getting stuck on local peaks and failing to follow the global maximum power point (GMPP). To overcome such obstacles, a new Lyapunov-based Robust Model Reference Adaptive Controller (LRMRAC) is designed and implemented to reach GMPP rapidly and ripple-free. The proposed controller also achieves MPP accurately under slow, abrupt and rapid changes in radiation, temperature and load profile. Simulation and OPAL-RT real-time simulators in various scenarios are performed to verify the superiority of the proposed approach over the other state-of-the-art methods, i.e., ANFIS, INC, VSPO, and P&O. MPP and GMPP are accomplished in less than 3.8 ms and 10 ms, respectively. Based on the results presented, the LRMRAC controller appears to be a promising technique for MPPT in a PV system.     

Improved Torque and Flux Performance of Type-2 Fuzzy-based Direct Torque Control Induction Motor Using Space Vector Pulse-width Modulation

The conventional proportional integral controlled direct torque control of an induction motor using the space vector pulse-width modulation technique may provide satisfactory dynamic response. However, the proportional integral controller (PIC) does not provide efficient dynamic performance in the induction motor drive during sudden changes in the load or speed. To improve dynamic performance of the induction motor drive, the PICs are replaced by type-2 fuzzy logic control. The type-2 fuzzy improves the starting transient performance as well as the steady-state response. In addition, the type-2 fuzzy direct torque control provides lesser current total harmonic distortion, flux distortion, and torque pulsation of the induction motor drive compared to conventional direct torque control. A MATLAB Simulink (The MathWorks, Natick, Massachusetts, USA) model for direct torque control with type-2 fuzzy logic control is developed to simulate the response of an induction motor drive with different operating conditions. The space vector pulse-width modulation technique is used to drive the inverter, as it produces lesser total harmonic distortion in inverter current and voltage waveforms for a given switching transition due to the single switching frequency for the movement of each state vector. A prototype type-2 fuzzy-based direct torque control induction motor with space vector pulse-width modulation is developed to validate the simulated response. The control signals for the inverter are generated by the DSPACE DS1104 (DSPACE GmbH, Germany) to drive a two-HP induction machine.     

有FACTS装置的电力系统在市场环境下的最优调度

随着电力工业重构的不断深入,转运业务需求的增加要求系统提供更高的输送能力。FACTS技术的应用能够提高系统的输民能力、降低网损、改善系统的稳定性、降低电能成本,促使电能交易顺利完成。依据有功性能指标,文中提出了FACTS装置的优化配置方法,并通过解最优潮流问题得到FACTS装置的可控参数值,同时讨论了FACTS装置对系统实时电价的影响。用IEEE－14节点算例验证了所提算法的有效性。     

Influence of Liquid Phase Additives on Structural and Sintering Behaviour of Samarium Modified Lead Titanate Ceramics

The combination of metal oxides Bi₂O₃:Li₂O in a ratio 89:11 gives a eutectic with a melting point of ～680°C. Such a low melting point oxide combination creates a working liquid phase at a highly favorable temperature for use as a densification aid. A liquid—phase sintering aid incorporating Bi₂O₃ and Li₂O is presented which demonstrates not only a reduction in the required sintering temperature but also shows relatively higher ‘c/a’ ratio (tetragonality) of PbTiO₃ ceramics with no fragility of the samples. Detailed dilatometric investigations have been performed in order to study the dominant shrinkage mechanism in the present system. Besides acting as a liquid phase fluxing agent, Bi₂O₃/Li₂O also behave as Curie shifter, which decreases Curie temperature in lead titanate system. The Curie temperature has also been verified from the thermal expansion behavior of sintered specimens. The value of dielectric constant increases after poling which may be due to the dominance of 180° domain wall over 90°.     

Inverse active filters employing CFOAs

New configurations for realizing inverse lowpass, inverse bandpass, inverse highpass and inverse bandreject filters using commercially available current feedback op-amps (CFOA) with an accessible z-terminal such as AD844 are presented. The workability of the proposed circuits has been confirmed by experimental results employing AD844 type CFOAs.     

Online Signal Injection Through a Bus-Referenced Current Transformer

An online signal injection approach based on a special current transformer is proposed as part of a solution for improving the test setup of transfer function diagnostics of transformers. However, the method is general and applicable to many types of substation equipment, such as circuit breakers and transmission lines. The system allows a high-power, high-frequency test signal to be injected directly on a high-voltage bus of an energized system. Due to the self-contained nature of the injector, no external power supplies or signal generators are needed and the design does not need to be ground-referenced. The system can thus be at the bus potential. In conjunction with wireless communication for control, no isolator bushings are required and the device can be constructed as a sleeve to be mounted around the busbar. This allows for economical retrofitting to existing installations. In this paper, the operational need for such an injection device is discussed, followed by the theory behind the proposed concept. Finally, a low-voltage, optically controlled, self-powered prototype is designed and demonstrated online to show the practical validity of the concept.