Analysis of Particle and Crystallite Size in Tungsten Nanopowder Synthesis

Tungsten nanopowders were synthesized by a low-temperature technique and then heat treated in a gaseous reductive atmosphere in order to study the phase evolution, crystallite size, and particle size of the powders as the heat treatment temperature was modified. Synthesis of the powders was carried out in aqueous media using NaBH₄ as a reducing agent using careful control of the pH of the solutions. The XRD patterns of the as-synthesized powders showed an amorphous phase. After washing, energy dispersive spectroscopy showed that the powders had peaks for oxygen and tungsten. In order to promote crystallization and eliminate the oxygen, the powders were heat treated at 773 K, 923 K, and 1073 K (500 °C, 650 °C, and 800 °C) in a H₂/CH₄ reducing atmosphere for 2 hours. XRD after heat treatment showed α-W peaks for the powders treated at 1073 K and 923 K (800 °C and 650 °C) and a mixture of β-W and α-W for the powders treated at 773 K (500 °C). The crystallite sizes determined from X-ray peak broadening were 12, 16, and 20 nm, whereas the average particle sizes from dynamic light scattering were 260, 450, and 750 nm, for heat treatment temperatures of 773 K, 923 K, and 1073 K (500 °C, 650 °C, and 800 °C), respectively. The average crystallite size and particle sizes increased proportionally with the treatment temperature, in contrast to what has been found for some ceramics, in which as the heat treatment temperature is increased, the crystallite size increases, but the particle size stays constant.     

Viscoelastic flow between two infinite parallel porous plates,one plate oscillating and the other plate in uniform motion

The problem of viscoelastic incompressible flow between two infinite parallel porous plates, one oscillating and the other in uniform motion, was studied and an iteration method was used to solve the fluid dynamical equations. The solution obtained is valid for small values of the elastic parameter S. The effects of the flow parameters S and σ (the Reynolds number) on the velocity distribution and on the shearing stress at the plates are presented graphically.     

FORCED CONVECTIVE MASS TRANSFER IN ANNULI

Mass transfer in annuli has been critically examined for various flow situations. The overall mass transfer rate depends on the hydrodynamic regions prevailing in the annular channel as well as on its dimensions. Theoretically consistent correlations are proposed and recommended for both developed and developing boundary layers under laminar and turbulent flow conditions.     

Modeling liquid water transport in gas diffusion layers by topologically equivalent pore network

A topologically equivalent pore network (TEPN) model is developed for the first time to extract pore networks directly from gas diffusion layer (GDL) microstructures and thus account for all structural features of a GDL material. A generic framework of TEPN modeling is presented to design GDL structures that enable improved water management. With TEPNs used as input to a two-phase flow simulator, constitutive relations and steady-state liquid saturation profiles for carbon paper and carbon cloth are obtained and reported in this work. The results indicate a strong influence of the GDL morphology on water transport characteristics, which helps unravel the structure-performance relationship for GDLs.     

Study of pyro-carbon coated alumina kernel using mixed contrast transfer based X-ray phase retrieval technique

We have used the contrast transfer function based X-ray phase retrieval technique for phase retrieval studies on a two-component system. Pyro-carbon coated alumina matrix was chosen as a two-component system for these studies. Simulations as well as experimental results are presented. This paper shows that X-ray phase contrast along with phase retrieval can become an alternative tool for non-destructive characterization of these materials. We have also attempted to retrieve the spatial distribution of the projected thickness map of the two different elements.     

Phenomena of reverse momentum pulse and fluid leak after poison injection in the shut down system of PHWR

The primary function of the shut down system in a nuclear reactor is to terminate any reactivity transient occurring in the core during its entire design life. Normally there is more than one system, which are independent and diverse in its mode of operation. They consist of quick acting mechanisms like dropping of safety rods by gravity, poison injection, etc. Typically in liquid poison injection system wherein high flow velocities are involved, there is significant fluid structure interaction associated with cyclic shock transients in the system. One such phenomenon has been captured and analyzed to understand the dynamics involved in the loop. The trends of loop pressure and vibration indicated presence of more than two pressure transients after complete injection of poison. The first transient arrived after 1.44 s and the second after 0.75 s. The reverse pressure pulses that manifested in the loop as a result of fast injection of fluid has been mathematically characterized by solving basic fluid balance equations. Possibility of ball lifting due to momentum pulse is also discussed.     

Influence of thickness on nanomechanical behavior of Black Diamond™ low dielectric thin films for interconnect and packaging applications

In the present study, we have investigated the thickness dependence of mechanical properties of the Black Diamond? (SiOC:H, BD, Low-k) films, which are of great interest in current Cu/low-k Back End of the Line (BEOL) interconnect/packaging technologies. For this investigation the BD thin films of six different thicknesses 100, 300, 500, 700, 1,000 and 1,200 nm were deposited on the 8″ Si wafer by using plasma enhanced chemical vapor deposition (PECVD) technique. Nanoindentation and nanoscratch tests of the BD films were performed by using the Nano Indenter^® XP (MTS Corp. USA). In nanoindentation testing of the BD films, significant differences in the elastic modulus of the BD films were observed. In nanoscratch testing, it is found that the critical load (Lc) and scratch width increases as the thickness of the film increases. Cross-sectional analysis of residual nanoindentation impressions was carried out using atomic force microscopy (AFM) to study the deformation behavior. The nanoindentation and nanoscratch responses of the BD thin films of six different thicknesses are different and they are expected mainly due to the molecular reorganization in thin/ultra thin films.     

CNS: a new energy efficient transmission scheme for wireless sensor networks

We present in this paper a new energy-efficient communication scheme called CNS (Compression with Null Symbol) that combines the power of data compression and communication through silent symbol. The concept of communication through silent symbol is borrowed from the energy efficient schemes proposed in Sinha (Proceedings of 6th IEEE consumer communications and networking conference (CCNC), Las Vegas, pp. 1–5, 2009), Ghosh et al. (Proceedings of 27th IEEE international performance computing and communications conference (IPCCC), USA, pp. 85–92, 2008), and Sinha and Sinha (Proceedings of international conference on distributed computing and internet technologies (ICDCIT), LNCS, pp. 139–144, 2008). We show that the average theoretical energy saving at the transmitter by CNS is 62.5%, assuming an ideal channel and for equal likelihood of all possible binary strings of a given length. Next, we propose a transceiver design that uses a hybrid modulation scheme utilizing FSK and ASK so as to keep the cost/complexity of the radio devices low. Considering an additive white gaussian noise (AWGN) channel and a non-coherent detection based receiver, CNS shows a saving in transmitter energy by 30% when compared to binary FSK, for equal likelihood of all possible binary strings of a given length. Simultaneously, there is a saving of 50% at the receiver for all types of data modulation due to halving of the transmitted data duration, compared to binary encoding. In contrast, RBNSiZeComm proposed in Sinha (Proceedings of 6th IEEE consumer communications and networking conference (CCNC), Las Vegas, pp. 1–5, 2009), TSS proposed in Ghosh et al. (Proceedings of 27th IEEE international performance computing and communications conference (IPCCC), USA, pp. 85–92, 2008) and RZE proposed in Sinha and Sinha (Proceedings of international conference on distributed computing and internet technologies (ICDCIT), LNCS, pp. 139–144, 2008) generate average transmitter energy savings of about 41, 20, and 35.2%, respectively. Also, at the receiver side, while RBNSiZeComm does not generate any saving, TSS and RZE produce about 36.9 and 12.5% savings on an average, respectively. Considering certain data types that may occur in the context of some wireless sensor networks (WSN) based applications (e.g., remote healthcare, agricultural WSNs, etc.), our simulation results demonstrate that for AWGN noisy channels, the transmitter side savings vary from about 33–50% on an average, while for RBNSiZeComm, this saving is about 33–61% on the same data set (Sinha in Proceedings of 6th IEEE consumer communications and networking conference (CCNC), Las Vegas, pp. 1–5, 2009). Thus, taking into account the low cost/complexity of the proposed transceiver, these results clearly establish that CNS can be a suitable candidate for communication in low power wireless sensor networks, such as in remote healthcare applications, body area networks, home automation, WSNs for agriculture and many others.     

Dynamic Loads in the Fan Containment Structure of a Turbofan Engine

In accordance with the FAA certification requirements, all modern commercial turbofan engines must successfully demonstrate its ability to withstand a fan blade-out (FBO) event through actual test. Possibility of losing a rotating fan blade from a running engine is a flight safety consideration, which must be addressed during the design phase of the engine. A typical fan blade-out event involves very complex nonlinear transient dynamics with large deflection of the release blade and rigid body rotation of the trailing blade as well as progressive failure and fragmentation of various components. Due to the nature of the impact type loading, the solution to the problem should also address dependence of the material behavior such as yield strength as a function of strain rates. In short, the transient dynamic analysis of a fan blade-out event highlights the complexity of the numerical technique, which includes all the nonlinearities of structural dynamics: plastic behavior of the materials, large displacements, and contact interaction between structural elements. In this paper, we present the results of a LS-DYNA simulation of a FBO event on a full-engine analytical model, which covers both the primary as well as secondary damages.     

Link Estimation and Routing in Sensor Network Backbones: Beacon-Based or Data-Driven?

In the context of IEEE 802.11b network testbeds, we examine the differences between unicast and broadcast link properties, and we show the inherent difficulties in precisely estimating unicast link properties via those of broadcast beacons even if we make the length and transmission rate of beacons be the same as those of data packets. To circumvent the difficulties in link estimation, we propose to estimate unicast link properties directly via data traffic itself without using periodic beacons. To this end, we design a data-driven routing protocol Learn-on-the-Fly (LOF). LOF chooses routes based on ETX/ETT-type metrics, but the metrics are estimated via MAC feedback for unicast data transmission instead of broadcast beacons. Using a realistic sensor network traffic trace and an 802.11b testbed of ~195 Stargates, we experimentally compare the performance of LOF with that of beacon-based protocols, represented by the geography-unaware ETX and the geography-based PRD. We find that LOF reduces end-to-end MAC latency by a factor of 3, enhances energy efficiency by a factor up to 2.37, and improves network throughput by a factor up to 7.78, which demonstrate the feasibility and the potential benefits of data-driven link estimation and routing.