Polyolefin Nanocomposites with Enhanced Photostability Weathering Effect on Morphology and Mechanical Properties

This research aims to study the effect of accelerated weathering conditions on the photodegradation characteristics for fibrillar silicate clay-filled Polypropylene (PP) nanocomposites in the presence of metallocene linear low density polyethylene (m-LLDPE). Silane-treated attapulgite (ATP) clay along with ethylene octene elastomer-grafted maleic anhydride (POE-g-MAH) was used to compatibilize both blend and nanocomposite system. The result showed that developed PP/m-LLDPE nanocomposites displayed good UV resistance with little change in retained stress-at-break and elongation-at-break values. Balanced loss of toughness values noted maintaining higher fracture toughness values for nanocomposites containing 5 phr ATP clay. Infrared analysis was used to detect progress of degradation followed by change in carbonyl index revealed predominated chain scission in late irradiation, while crosslinking was dominant for initial irradiation period. An increase in crystallinity during UV exposure (chemi-crystallization) was detected with exposure time for all compositions and virtually independent of initial structure of the polymer. The highest value of crystallization observed for PP and the lowest one for nanocomposites containing 5 phr of ATP clay revealed good oxidation stability. Surface morphology revealed induced degradation throughout cross-section of PP, while severity of the surface degradation was significantly reduced for developed nanocomposites.     

Solar access of residential rooftops in four California cities

Shadows cast by trees and buildings can limit the solar access of rooftop solar-energy systems, including photovoltaic panels and thermal collectors. This study characterizes residential rooftop shading in Sacramento, San Jose, Los Angeles and San Diego, CA. Our analysis can be used to better estimate power production and/or thermal collection by rooftop solar-energy equipment. It can also be considered when designing programs to plant shade trees.High-resolution orthophotos and LiDAR (Light Detection And Ranging) measurements of surface height were used to create a digital elevation model of all trees and buildings in a well-treed 2.5–4 km² residential neighborhood. On-hour shading of roofing planes (the flat elements of roofs) was computed geometrically from the digital elevation model. Values in future years were determined by repeating these calculations after simulating tree growth. Parcel boundaries were used to determine the extent to which roofing planes were shaded by trees and buildings in neighboring parcels.For the subset of S + SW + W-facing planes on which solar equipment is commonly installed for maximum solar access, absolute light loss in spring, summer and fall peaked about 2 to 4 h after sunrise and about 2 to 4 h before sunset. The fraction of annual insolation lost to shading increased from 0.07–0.08 in the year of surface-height measurement to 0.11–0.14 after 30 years of tree growth. Only about 10% of this loss resulted from shading by trees and buildings in neighboring parcels.     

Characterisation and determination of in vitro antioxidant potential of betalains from Talinum triangulare (Jacq.) Willd.

Talinum triangulare (Jacq.) Willd is an erect, succulent, perennial herb belonging to the family Portulacaceae. Under extreme environmental conditions, the plant produces betalain pigments which get accumulated in the stem region. Hence, in the present study, the betaxanthin and betacyanin patterns from different samples of T. triangulare have been investigated by applying high-performance liquid chromatography photo-diode array detection (HPLC-PDA) coupled with positive ion electro-spray mass spectrometry. Two betacyanins and two betaxanthins were identified in aqueous methanolic extract of flower, stem and leaf. Betanin, isobetanin, immonium conjugates of betalamic acid with dopamine and tyrosine were elucidated. The total betalain content was estimated by photometric analysis. In vitro antioxidant activity for the betalain extract determined by various methods revealed potent scavenging ability. The current work may possibly be considered beneficial in utilisation of the plant T. triangulare as a natural colourant in food and beverage industries.     

Mechanical,Thermal, and Interfacial Characterization of Randomly Oriented Short Sisal Fibers Reinforced Epoxy Composite Modified with Epoxidized Soybean Oil

Short sisal fibers were reinforced in epoxidized soybean oil (ESO) modified toughened epoxy blends to improve the mechanical and thermo mechanical properties. Tensile modulus and tensile strength of the composite with 15 wt% sisal fiber were found to be increased as compared with bio-based epoxy blend. From DTG analysis, rate of degradation peak is found to be shifted to higher temperature revealing enhanced thermal stability of composite over base matrix. Dynamic mechanical analysis predicted higher storage modulus and higher glass transition temperature of bio-based epoxy composite. Scanning electron micrographs showed strong fiber-matrix adhesion. Contact angle measurement reveals the hydrophilic character of bio-based epoxy composite     

Internet of Dental Things (IoDT), Intraoral Wireless Sensors,and Teledentistry: A Novel Model for Prevention of Dental Caries

Wireless Personal Communications - Dental caries is a complex, multifactorial, transmissible biofilm-initiated oral disease, which results in loss of tooth structure. Oral microbial flora, pH of...     

Recent Development of Biobased Epoxy Resins: A Review

Currently, the utilization of renewable resources for sustainable technology is in the renown of consumer as well as industrial attention, especially, chemical industries because of their availability, low cost, credentials toward environmental issues such as lower ecotoxicity, CO₂ footprints, and inbuilt biodegradability. These natural properties are being taken advantage of in research and development, with vegetable oil-, furan-, lignin-, rosin-,vanillin-, and itaconic acid-derived biobased epoxy resin being used in various applications including paints, coatings, adhesives, and biomedicine. The present review mainly focuses on the utilization of natural resources for the synthesis of biobased epoxy and its curing agents.     

RGO/MgO hybrid nanocomposites with high specific capacitance

A scalable, cost effective synthesis of reduced graphene oxide (RGO)-magnesium oxide (MgO) hybrid nanocomposite (RGOMOHNC) is reported in the present work. The process involves an in-situ sonication method in aqueous medium at room temperature e.g., 30 °C. The as synthesized graphene oxide (GO) and RGOMOHNC powders are characterized by the XRD, FESEM, TEM, FTIR, RS and XPS techniques. The results indicate that in-situ growth of 20–30 nm MgO nanoparticles effectively increases the graphitic nature of the layered RGO microstructure. The experimentally measured cyclic voltammetry (CV) plots show that the specific capacitance of the RGOMOHNC powders is three orders of magnitude higher than that of the GO powders. A mechanism of RGOMOHNC formation has been proposed.     

Defect Diagnosis Using a Current Ratio Based Quiescent Signal Analysis Model for Commercial Power Grids

Quiescent Signal Analysis (QSA) is a novel electrical-test-based diagnostic technique that uses I _DDQ measurements made at multiple chip supply pads as a means of locating shorting defects in the layout. The use of multiple supply pads reduces the adverse effects of leakage current by scaling the total leakage current over multiple measurements. In previous work, a resistance model for QSA was developed and demonstrated on a small circuit. In this paper, the weaknesses of the original QSA model are identified, in the context of a production power grid (PPG) and probe card model, and a new model is described. The new QSA algorithm is developed from the analysis of I _DDQ contour plots. A family of hyperbola curves is shown to be a good fit to the contour curves. The parameters to the hyperbola equations are derived with the help of inserted calibration transistors. Simulation experiments are used to demonstrate the prediction accuracy of the method on a PPG.