A Novel Fluorescence Probe 9-（4-（1,2-diamine）benzeneN 1-phenyl）acridine for Nitric Oxide Determination

A novel fluorescent probe 9-(4-(1,2-diamine)benzene-N1-phenyl)acridine(DABPA) was synthesized for the detection of nitric oxide(NO) and characterized by IR, 1H-NMR and EI-MS spectroscopy. Based on a photoelectron transfer mechanism, the fl uorescence intensities of DABPA were investigated with the different concentrations of NO. Under the optimal experimental conditions, the fl uorescence intensity of DABPA had a good linear relationship(R2=0.9977) with NO concentration in the range from 1×10-7 to 1.5×10-6 mol/L with a detection limit of 1×10-8 mol/L. The cytotoxicity induced by DABPA was evaluated by the MTT(3-(4,5-dimethylthiazol-2-yl)-2,5diphenyl tetrazolium bromide) assay for biological application. Furthermore, the probe DABPA had also been successfully applied to real-time image NO produced in PC12 cells in the presence of L-arginine.     

Evaluation research on applicability of rapid iodide migration test

The applicability of the rapid iodide migration test was systematically studied. Comparative experimental tests of different test conditions, including several external voltages, test durations, concrete ages and mixing proportions, were carried out to make clear the transport behaviors of iodide under parallel electric fields. Numerical simulations were also done using the finite element method to found the correlation between chloride and iodide transport behaviors. The test and numerical results show that the chloride transport behaviors of RIM and RCM tests have a good correlation under the several conditions used in the present paper. Moreover, the influence of external conditions （external voltages, test durations） on the test results is small. Thus, it can be concluded that the RIM method is available to determine the chloride penetration resistance of the chloride-eroded structural concrete.     

Evaluation of apatite-coated chitosan microspheres for bone regeneration

The apatite-coated chitosan microspheres were fabricated by incubating chitosan in five times simulated body fluid. The apatite deposited on the microspheres was similar to natural bone mineral, as demonstrated by scanning electron microscopy, X-ray diffraction spectra and Fourier transformed-infrared spectroscopy analyses. Rat bone marrow-derived mesenchymal stem cells （BMSCs） were seeded on apatite- coated microspheres to investigate the effect of this scaffold on cell proliferation and differentiation. BMSCs seeded on uncoated microspheres were served as a control. In vivo experiment was evaluated by transplanting the microspheres loaded with or without BMSCs in 5-mm cranial defects of Wistar rats. Bone regeneration was investigated via micro-CT and histological analysis. It was found that apatite-coated chitosan microspheres could significantly promote the proliferation and alkaline phosphatase activity of BMSCs compared with uncoated microspheres. Histological slices and Micro-CT images at 8 weeks revealed much better regeneration of bone in the apatite-coated microspheres loaded with BMSCs than the control. In addition, the defect filled with pure microspheres induced little new bone formation. Our findings suggest that the apatite-coated chitosan microspheres scaffold is a promising carrier of stem cells for cranial bone tissue engineering.     

超细矿粉对混凝土界面区硫酸盐腐蚀的影响

为了研究骨料与水泥石界面区(ITZ)的组成及结构对混凝土抗硫酸盐腐蚀性能的影响,利用紫外分光光度计绘制了硫酸钠溶液浸泡混凝土试样的SO2-4浸入浓度/深度曲线,并辅以扫描电镜(SEM)和电子探针能谱(EDS)等对ITZ进行观测;同时利用XRD定量分析研究了混凝土本体相和界面相的水化产物富集的差异.结果表明:Ca(OH)2、钙矾石(AFt)等晶体富集于硫酸钠溶液浸泡后试样的ITZ,引起AFt二次结晶型的硫酸盐腐蚀破坏.在适量石膏的激发下,掺入超细矿粉(GGBS)可阻止AFt转变成单硫型水化硫铝酸钙(AFm),减少AFt二次结晶的生成,明显提高抗硫酸盐侵蚀能力,试样的同深度硫酸根浓度最低,抗硫酸盐侵蚀性能最好.     

ODPA-ODA型聚醚酰亚胺膜的预氧化机理

为了开发新型高性能炭膜前驱体材料,研究了ODPA-ODA型聚醚酰亚胺膜经430~530℃空气氛围的预氧化机理.借助热重分析、红外光谱、元素分析及x-射线衍射等手段,分析了预氧化温度对预氧化膜的溶解度、柔韧度、表面官能团、元素质量分数及微观结构的影响.结果表明:优化预氧化过程是制备无缺陷高质量炭膜的关键.预氧化可提高热稳定性,形成的交联结构有利于提高残炭量和成膜性.随预处理温度的提高,交联程度提高,但当温度高于490℃时会发生过渡氧化.     

基于相位信息与空间关系的路面裂缝检测

针对传统边缘检测算法的不足,分析路面裂缝低信噪比特点,提出了一种基于相位信息与区域空间关系的路面裂缝检测方法。首先,利用相位信息计算成对像素的相似性,并引入空间关系,使得位于边缘同侧的相似性增强,异侧的相似性减弱,然后应用谱方法进行聚类,完成裂缝边缘提取。实验结果表明方法有效。     

螺环结构膨胀单体的合成及膨胀性能研究

为解决环氧树脂固化时体积收缩带来的不良影响,用实验室合成的三元醇与二正丁基氧化锡反应制得螺环结构的膨胀单体3,9-二羟甲基-3,9-二(二甲基乙硫基)-1,5,7,11-四氧杂螺环[5,5]十一烷改性环氧树脂.产物经红外、核磁表征其结构.用膨胀剂跟踪测定阳离子引发膨胀单体开环聚合体积膨胀率为3.16%,考察预聚体改性环氧树脂体积膨胀率的变化,为1.194%.     

Fisher方程的行波解

通过行波变换将Fisher方程转变为复域中的常微分方程,给出复化的Fisher方程wu’-ακ^2u^u-β（u-u^2）=0的亚纯解结构．     

β钛合金微弧氧化膜制备及其在人体模拟液中腐蚀性能研究

采用微弧氧化技术在TiNbZrFe合金表面制备出含钙磷成分的多孔氧化膜,通过人体模拟液浸泡的方法诱导生成羟基磷灰石,并利用电化学阻抗谱（EIS）研究其在人体模拟液中浸泡不同时间后的耐腐蚀性能．结果表明,经400V电压微弧氧化后TiNbZrFe合金表面氧化膜的形貌与成分达到最优化,且明显有α-Ca3（PO4）2 相生成;α-Ca3（PO4）2 相能够起到良好的诱导生成羟基磷灰石（HA）的作用,在人体模拟液中浸泡1d后,通过XRD检测出有HA相生成,导致微弧氧化膜层表面的微孔被诱导生成物覆盖填充明显,较小微孔完全消失;随着浸泡时间的延长,经过微弧氧化膜诱导生成的HA涂层不断增厚,EIS结果表明其具有良好的隔绝渗透作用,能够阻碍腐蚀性介质在溶液和金属界面之间扩散和迁移,从而起到保护基体抗腐蚀的作用．     

Direct reduction of carburized pre-reduced pellets by microwave heating简

A new iron-making process using carburized pre-reduced iron ore pellets and microwave heating is investigated. The pre-reduced pellets, with a porous structure, and fine particles are carburized homogeneously at 400-650 ℃ in a CO atmosphere. The carburized carbon not only acts reaction as a reduction agent, but also absorbs microwave in the reduction process. Hence, the carburized pre-reduced pellets can be rapidly reduced by microwave heating. There are three procedures involved in the process, namely, gas-based pre-reduction, low-temperatttre carburization and deep reduction by microwave heating. Carburized pre-reduced iron ore pellets show a rapid temperature rise that is twice as fast as the results for pre-reduced pellets in the laboratory. This not only improves the efficiency of the microwave heating, but also accelerates the reduction of iron oxides. The temperature of the pre-reduced pellets rises to 1050 ℃ in 45 min when the carburization rate is 2.02%, and the metallization rate and compressive strength reach 94.24% and 1725 N/pellet, respectively.