Monolithic distributed amplifier with active control schemes for optimum gain and group-delay flatness, bandwidth, and stability

In this paper, active control schemes are presented to optimize the performance of the distributed amplifier (DA) subject to the process variation. A detailed analysis of the DA with mismatched termination loads has been performed, which reveals that pronounced gain and group-delay ripple arises at the low-frequency end from the reflected waves in the artificial transmission line. To solve this problem, an active variable resistor is proposed as the gate-line termination load. The gain and stability of the cascode DA has also been analyzed, which identifies the most critical component determining the tradeoff between the gain-bandwidth product (GBP) and the stability to be the gate feedback resistor of common-gate field-effect transistor. It is also replaced with the active resistor to maximize GBP, while avoiding oscillations. A nine-section cascode DA with active control features is designed and fabricated using commercial GaAs pseudomorphic high electron-mobility transistor foundry. The measurement shows that the gain and group-delay ripple can be minimized, and GBP can be maximized without oscillations by the active bias controls. Active control schemes allow the monolithic DAs to be fine tuned after the fabrication and, thus, can be a robust DA design methodology against process variation and inaccurate device models.     

Chiroptical‐Conjugated Polymer/Chiral Small Molecule Hybrid Thin Films for Circularly Polarized Light‐Detecting Heterojunction Devices

Herein, a simple and facile strategy is described to obtain chiroptically active semiconductor thin films by blending of poly(3‐alkylthiophene)s, which are conventional achiral polymer semiconductors, and 1,1′‐binaphthyl (BN), a versatile chiral molecule. As expected, the intermolecular interaction between the two materials is important to extend the chirality of the binaphthyl molecules to the hybrid films. The controlled phase separation and crystallization of poly[3‐(6‐carboxyhexyl)thiophene‐2,5‐diyl] (P3CT) and binaphthyl hybrid films result in unique heterojunction bilayer thin‐film structures that consisted of BN microcrystals at the top and a P3CT/BN mixed layer at the bottom. Such heterojunction bilayer films exhibit significantly amplified chiroptical response with weak broadened tails, which is due to the enhanced crystallization of the chiral BN molecules and formation of heteroaggregates in the hybrid films. Based on the characterization of crystalline structure and photoluminescence analysis, it is found that new electronic energy states are formed in the conduction band region of P3CTs in the P3CT/BN heteroaggregates, which contribute to chirality transfer from BN to the hybrid films. As a proof of concept, a photodiode capable of distinguishably sensing the left‐ and right‐handed circularly polarized light is successfully fabricated by using the hybrid films with the heterojunction bilayer structure.     

A Multiscale-Porous Anion Exchange Membrane for Convenient and Scalable Electrokinetic Concentration of Cationic Species

A device able to electrokinetically concentrate cationic samples has many potential medical and industrial applications, but until now has remained undeveloped due to the lack of a commercial anion-permselective material leading to a prohibitively complex fabrication procedure. Herein, a novel multiscale-porous anion exchange membrane (MP-AEM) that enables the convenient and scalable electrokinetic concentration of cationic species is proposed. A mechanically enhanced multiscale-porous structure with a solid framework is realized by adopting polyester resin as an additive to overcome the intrinsic limitations of the AEM material. The scalable MP-AEM-embedded electrokinetic concentrator is devised based on the peculiar properties of the MP-AEM that for allow both ion and fluid transport. With the MP-AEM, the concentrator is fabricated in a highly streamlined manner consisting only of a simple insertion and assembly. The concentration performance of the MP-AEM-embedded electrokinetic concentrator is demonstrated with a positively charged fluorescent dye and a fluorescein-labeled protein, and the results show enrichment factors of 250 and 500, respectively. The MP-AEM makes cationic electrokinetic concentration more accessible and scalable, thereby enabling further progress in a wide range of fields.     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

Ceramic chip antenna using meander conductor lines

A ceramic chip antenna using meander conductor lines has been designed, fabricated, and measured. The measured impedance bandwidth is 9.8% (1.85-2.06 GHz). It is increased to 19.1% (1.89-2.29 GHz) with an adjacent conducting plane. The radiation patterns are similar to that of a monopole antenna. The antenna gain is ~1.5 dBi     

H-SPREAD: a hybrid multipath scheme for secure and reliable data collection in wireless sensor networks

Communication security and reliability are two important issues in any network. A typical communication task in a wireless sensor network is for every sensor node to sense its local environment, and upon request, send data of interest back to a base station (BS). In this paper, a hybrid multipath scheme (H-SPREAD) to improve both the security and reliability of this task in a potentially hostile and unreliable wireless sensor network is proposed. The new scheme is based on a distributed N-to-1 multipath discovery protocol, which is able to find multiple node-disjoint paths from every sensor node to the BS simultaneously in one route discovery process. Then, a hybrid multipath data collection scheme is proposed. On the one hand, end-to-end multipath data dispersion, combined with secret sharing, enhances the security of the end-to-end data delivery in the sense that the compromise of a small number of paths will not result in the compromise of a data message in the face of adversarial nodes. On the other hand, in the face of unreliable wireless links and/or sensor nodes, alternate path routing available at each sensor node improves the reliability of each packet transmission significantly. The extensive simulation results show that the hybrid multipath scheme is very efficient in improving both the security and reliability of the data collection service seamlessly.     

Design of MAC protocols with fast collision resolution for wireless local area networks

Development of efficient medium access control (MAC) protocols providing both high throughput performance for data traffic and good quality of service (QoS) support for real-time traffic is the current major focus in distributed contention-based MAC protocol research. In this paper, we propose an efficient contention resolution algorithm for wireless local area networks, namely, the fast collision resolution (FCR) algorithm. The MAC protocol with this new algorithm attempts to provide significantly higher throughput performance for data services than the IEEE 802.11 MAC algorithm and more advanced dynamic tuning backoff (DTB) algorithm. We demonstrate that this algorithm indeed resolves collisions faster and reduces the idle slots more effectively. To provide good fairness performance and to support good QoS for real-time traffic, we incorporate the self-clocked fair queueing algorithm and a priority scheme into the FCR algorithm and come up with the real-time FCR (RT-FCR) algorithm, and show that RT-FCR can simultaneously achieve high throughput and good fairness performance for nonreal-time traffic while maintaining satisfactory QoS support for real-time traffic.     

1.55 /spl mu/m bottom-emitting InAlGaAs VCSELs with Al/sub 2/O/sub 3//a-Si thin-film pairs as top mirror

A a 1.55 /spl mu/m InAlGaAs/InP vertical-cavity surface-emitting laser grown by metal-organic chemical vapour deposition is presented. Al/sub 2/O/sub 3//a-Si thin-film pairs and InAlGaAs/InAlAs epitaxial layers are used as a top mirror and a bottom-side output coupler, respectively. Direct modulation characteristics through singlemode fibre are reported at a speed of 2.5 Gbit/s.     

High Performance Millimeter‐Wave Image Reject Low‐Noise Amplifier Using Inter‐stage Tunable Resonators

A Q‐band pHEMT image‐rejection low‐noise amplifier (IR‐LNA) is presented using inter‐stage tunable resonators. The inter‐stage L‐C resonators can maximize an image rejection by functioning as inter‐stage matching circuits at an operating frequency (F_OP) and short circuits at an image frequency (F_IM). In addition, it also brings more wideband image rejection than conventional notch filters. Moreover, tunable varactors in L‐C resonators not only compensate for the mismatch of an image frequency induced by the process variation or model error but can also change the image frequency according to a required RF frequency. The implemented pHEMT IR‐LNA shows 54.3 dB maximum image rejection ratio (IRR). By changing the varactor bias, the image frequency shifts from 27 GHz to 37 GHz with over 40 dB IRR, a 19.1 dB to 17.6 dB peak gain, and 3.2 dB to 4.3 dB noise figure. To the best of the authors' knowledge, it shows the highest IRR and F_IM/F_OP of the reported millimeter/quasi‐millimeter wave IR‐LNAs.