Nonlinear free and forced vibrations of graphene nanoplatelet reinforced microbeams with geometrical imperfection

Microsystem Technologies - Nonlinear free/forced vibration of a functionally graded graphene nanoplatelet (GNP) reinforced microbeam having geometrical imperfection which is rested on a non-linear...     

Economic cost models of integrated APC controlled SPC charts

In this paper, an economic cost model is proposed for processes integrating both automatic process control (APC) and statistical process control (SPC) for quality monitoring and control. Both the special cause and common cause variations are reduced by applying integrated APC and SPC. Traditionally, the integrated processes using APC and SPC are evaluated by the average run length (ARL). However, ARL may not be appropriate as a measurement of the economic design since it does not take into consideration the run length variation. Also, there are few studies that compare the cost models of such an integrated control system and the effect of cost parameters using different APC controllers. Therefore, we develop an economic cost model using non-homogenous Poisson process to describe the occurrence of an APC adjustment and develop a long run expected cost to investigate the use of different controllers in such integrated systems. Numerical examples are presented to demonstrate the applicability of the proposed model.     

Total Phenolics, Flavonoids, and Antioxidant Activity of Sage (Salvia officinalis L.) Plants as Affected by Different Drying Methods

In the current study, we determined the effects of seven drying methods on total phenolics, flavonoids, individual phenolics, and antioxidant activity of the methanol extract of Salvia officinalis L. As compared with total phenolic content (TPC) of fresh plants, results showed that the highest TPC was recorded in plants dried by microwave (MW) at a power of 800 W/30 g of fresh plant and was 4.2 times higher than that of fresh plants whereas the lowest content was found in the case of plants dried by far-infrared (FIR) at 45 °C. The analysis of the different extracts by RP-HPLC showed a predominance of phenolic acids particularly in fresh plants and those dried by MW (600 W/30 g of fresh plant) whereas flavonoids predominate in the case of plants dried by FIR (65 °C). The assessment of the radical scavenging activity (RSA) against the stable radical 1,1-diphenyl-1-picrylhydrazyl (DPPH) showed an increase in the scavenging effect particularly in MW (800 W/30 g of fresh plant) dried plants with an IC50?=?13.49 μg ml^?1 (IC50 is the concentration required to cause 50 % DPPH inhibition). The complementary assessment of the RSA using the β-carotene/linoleic acid system showed an increase of this activity for all extracts and particularly for the extract derived from MW (600 W/30 g of fresh plant) dried plants as compared to fresh ones. Finally, all the plant extracts showed moderate reducing power as assessed by the ferric-reducing antioxidant potential. These results suggested that MW drying could be applied to retain phenolic contents and to enhance antioxidant activity of sage plant materials.     

Thermo elastic analysis of a functionally graded rotating disk with small and large deflections

A functionally graded (FG) rotating disk with axisymmetric bending and steady-state thermal loading is studied. The material properties of the disk are assumed to be graded in the direction of the thickness by a power law distribution of volume fractions of the constituents. First-order shear deformation Mindlin plate and von Karman theories are employed. New set of equilibrium equations with small and large deflections are developed. Using small deflection theory an exact solution for displacement field is given. Solutions are obtained in series form in case of large deflection. Mechanical responses are compared small deflection versus large deflection as well as homogeneous versus FG disks. It is observed that for particular values of the grading index n of material properties mechanical responses in FG disk can be smaller than in a homogeneous disk. It is seen that given the non-dimensional maximum vertical displacement w_max/h close to 0.4 for a homogeneous (full-ceramic in this study) disk greater errors in the mechanical responses for FG disks would be introduced if one uses small deflection theory.     

Stylus contact time during measurement—An effective factor in accuracy

An experimental study was carried out to determine formulae showing the effect of instantaneous and time local deformation at the point of contact between stylus and measured surface on the precision and accuracy of both measuring standard slip gauges and brass workpieces.Such formulae are useful in practice as new correction functions for the precision and accuracy of measurement. Using styli with spherically ended tips of various diameters as used in practice a wide range of measuring forces, different surface finishes of brass workpieces and time of measuring were investigated.     

Crushing response of composite corrugated tubes to quasi-static axial loading

This paper is devoted to examine the crushing behaviour of axially crushed composite corrugated tubes. Two types of composites were tested, namely, carbon fibre/epoxy in a filament form and glass fibre/epoxy in woven roving form. A series of experiments was conducted for tubes with corrugation angle (β) ranging from 10° to 40°. Typical failure histories of their failure mechanisms are presented and discussed. The results showed that the crushing behaviour of composite corrugated tube is found to be sensitive to the change in corrugation angle and fibre type. Carbon/epoxy tubes with corrugation angle of 40° displayed the highest specific energy absorption capability. It is also found that introducing of corrugation could significantly enhance the energy absorption capability of composite tubes in a uniform manner.     

Reversible and irreversible low-pressure membrane foulants in drinking water treatment: Identification by principal component analysis of fluorescence EEM and mitigation by biofiltration pretreatment

With the increased use of membranes in drinking water treatment, fouling - particularly the hydraulically irreversible type - remains the main operating issue that hinders performance and increases operational costs. The main challenge in assessing fouling potential of feed water is to accurately detect and quantify feed water constituents responsible for membrane fouling. Utilizing fluorescence excitation-emission matrices (EEM), protein-like substances, humic and fulvic acids, and particulate/colloidal matter can be detected with high sensitivity in surface waters. The application of principal component analysis to fluorescence EEMs allowed estimation of the impact of surface water constituents on reversible and irreversible membrane fouling. This technique was applied to experimental data from a two year bench-scale study that included thirteen experiments investigating the fouling potential of Grand River water (Ontario, Canada) and the effect of biofiltration pre-treatment on the level of foulants during ultrafiltration (UF). Results showed that, although the content of protein-like substances in this membrane feed water (= biofiltered natural water) was much lower than commonly found in wastewater applications, the content of protein-like substances was still highly correlated with irreversible fouling of the UF membrane. In addition, there is evidence that protein-like substances and particulate/colloidal matter formed a combined fouling layer, which contributed to both reversible and irreversible fouling. It is suggested that fouling transitions from a reversible to an irreversible regime depending on feed composition and operating time. Direct biofiltration without prior coagulant addition reduced the protein-like content of the membrane feed water which in turn reduced the irreversible fouling potential for UF membranes. Biofilters also decreased reversible fouling, and for both types of fouling higher biofilter contact times were beneficial.