Aerosol observations by lidar in the nocturnal boundary layer

Aerosol observations by lidar in the nocturnal boundary layer (NBL) were performed in Potenza, Southern Italy, from 20 January to 20 February 1997. Measurements during nine winter nights were considered, covering a variety of boundary-layer conditions. The vertical profiles of the aerosol backscattering coefficient at 355 and 723.37 nm were determined through a Klett-modified iterative procedure, assuming the extinction-to-backscattering ratio within the NBL has a constant value. Aerosol average size characteristics were retrieved from almost simultaneous profiles of the aerosol backscattering coefficient at 355 and 723.37 nm, the measurements being consistent with an accumulation mode radius not exceeding 0.4 mum. Similar results in terms of aerosol sizes were obtained from measurements of the extinction-to-backscattering ratio profile at 355 nm performed on six nights during the measurement campaign. Backscattering profiles at 723.37 nm were also converted into profiles of aerosol liquid water content.     

Analysis of the receiver response in lidar measurements

We report on the calculation of the effective telescope area in lidar applications by a ray-tracing approach. This method allows one to consider the true experimental working conditions and hence to obtain accurate values of the effective telescope area as a function of the height. This in turn allows the retrieval of the signal from the ranges where the overlap function is not constant (e.g., lower ranges), thus increasing the useful range interval. Moreover, we show that the spherical mirrors are more appropriate than the parabolic ones for most of the lidar measurements, although a particular alignment procedure, such as the one we describe, must be used.     

Comprehensive numerical simulation of threshold-voltage transients in nitride memories

A new non-local algorithm for accurately calculating the band-to-band tunneling current suitable for TCAD semiconductor simulators is proposed in this paper. The proposed algorithm captures the essential physics of multi-dimensional tunneling in a 2D structure, and is designed to be robust and to achieve independence on the mesh grid. The new algorithm enables accurate modeling of T-FET and investigation of its device physics.     

Modeling of SILC based on electron and hole tunneling. II.Steady-state

For pt. I see ibid., vol. 47, no. 6 (June 2000). A numerical model for the stationary stress-induced leakage current (SILC) is presented, accounting for both electron and hole tunneling. Detailed comparisons against experimental results on both n- and p-channel devices highlight that the steady-state SILC is due to positively charged centers, with an energy level located in correspondence of the silicon bandgap. Electron-hole recombination at these sites dominates normal trap-assisted tunneling at low oxide fields, and successfully accounts for recently observed hole steady-state leakage. The contribution from neutral traps seems instead marginal. Based on this new picture, the impact of the recombination process on the leakage properties of ultrathin gate is also discussed     

In-service testing of wind turbine towers using a microwave sensor

A remote-sensing technique based on microwave interferometry is applied to dynamic testing of wind turbine towers for power generation. A high-speed interferometric radar is able to sample the structure at a rate high enough for modal and transient analysis. An experimental campaign is reported carried out on wind turbine towers of a power plant in north Sardinia, Italy.     

Effect of Alloying Elements on Thermal Diffusivity of Gray Cast Iron Used in Automotive Brake Disks

The purpose of this work was to experimentally investigate the thermal diffusivity of four different gray cast iron alloys, regularly used to produce brake disks for automotive vehicles. Thermal diffusivity measurements were performed at temperatures ranging from room temperature to 600 °C. The influence of the thermal conductivity on the thermomechanical fatigue life is also briefly presented. The measurements were sensitive to the influence of the carbon equivalent and alloying elements, such as molybdenum, copper and chromium. Molybdenum, unlike copper, lowered the thermal diffusivity of the gray cast iron, and alloy E (without molybdenum), besides presenting a relatively low carbon equivalent content and an increase in the values of the thermal diffusivity, presented the best performance during the thermomechanical fatigue. The molybdenum present in alloys B and C did not fulfill the expectations of providing the best thermomechanical fatigue behavior. Consequently, its elimination in the gray cast iron alloy for this application will result in a significant economy.     

A harvest and transport cost model for Eucalyptus spp. fast-growing short rotation plantations

This project developed a cost model for the mechanical harvesting of fast-growing Eucalyptus plantations. With such a model, forest managers can check the profitability of a prospective operation under different work conditions and assess the competitiveness of alternative options, which in turn will lead to supply chain optimization. The model is based on mathematical relationships that return machine productivity as a function of operational conditions. These relationships were calculated on data obtained from detailed time studies, conducted on all the main equipment types used in Eucalyptus plantations. Tests were conducted on 11 different machines that harvested a total 2465 oven-dry tonnes over 23 ha on 12 sites in 3 countries. The time study sessions lasted 250 h. Both the Cut-to-Length (CTL) system and the Whole-Tree (WT) system were studied. The model was validated with success and was used to make a number of different simulations. Simulation results show that the WT system allows cheaper harvesting and transport than the CTL system for a range of conditions. Under the conditions of our simulations and in favourable terrain, WT harvesting results in a delivered cost of about 20 euro/green tonne of bark-free pulp chips, whereas CTL harvesting results in a cost between 25 and over 30 euro/green tonne of debarked pulp roundwood.     

Influence of retained austenite on short fatigue crack growth and wear resistance of case carburized steel

The influence of the amount of retained austenite on short fatigue crack growth and wear resistance in carburized SAE 8620 steel was studied in this article. Different amounts of retained austenite in the microstructure of the carburized case were obtained through different heat treatment routes applied after the carburizing process. The wear tests were carried out using pin on disk equipment. After every 200 turns the weight loss was registered. Four point bend fatigue tests were carried out at room temperature, using three different levels of stress and R=0.1. Crack length versus number of cycles and crack growth rate versus mean crack length curves were analyzed. In both tests the results showed that the test pieces with higher levels of retained austenite in the carburized case exhibited longer fatigue life and better wear resistance.     

Two-electrode biopotential measurements: power line interference analysis

In this paper, an analysis of power line interference in two-electrode biopotential measurement amplifiers is presented. A model of the amplifier that includes its input stage and takes into account the effects of the common mode input impedance Z(C) is proposed. This approach is valid for high Z(C) values, and also for some recently proposed low-Z(C) strategies. It is shown that power line interference rejection becomes minimal for extreme Z(C) values (null or infinite), depending on the electrode-skin impedance's unbalance deltaZ(E). For low deltaZ(E) values, minimal interference is achieved by a low Z(C) strategy (Z(C) = 0), while for high deltaZ(E) values a very high Z(C) is required. A critical deltaZ(E) is defined to select the best choice, as a function of the amplifier's Common Mode Rejection Ratio (CMRR) and stray coupling capacitances. Conclusions are verified experimentally using a biopotential amplifier specially designed for this test.