Hydrogen permeation during zinc-manganese alloy plating

Electrodeposition of metals from solution is usually accompanied by the simultaneous discharge of hydrogen ions or water molecules. When hydrogen is liberated at an iron/steel surface during electrodeposition, a portion of the hydrogen is absorbed by the metal surface and then diffuses into the interior. The diffused hydrogen produces some detrimental effects, such as reduction in ductility and loss in mechanical strength, leading to hydrogen embrittlement. The present paper reports investigations on hydrogen permeation measurements in zinc-manganese alloy deposition using a modified electrode clamp for easy removal and fixing of the electrode. Hydrogen permeation studies indicate that the porosity of the deposit increases in the following order:Zn-Mn(14.3%), Zn-Mn(2.4%), Zn-Mn(24.8%) and Zn-Mn(37.5%).This is in agreement with the corrosion data obtained which indicates that Zn-Mn alloy deposits with low manganese content show better performance than pure zinc deposits.     

Grafting of methyl methacrylate to nitrocellulose by ceric ions

Studies were carried out on grafting of various vinyl monomers to nitrocellulose by ceric ions. It was observed that graft copolymerization occurred only with methyl methacrylate (MMA) and methyl acrylate monomer. The variables such as initiator concentration, monomer concentration, time of grafting, and nitrocellulose content on grafting of MMA are discussed. By hydrolyzing away the nitrocellulose backbone, the grafted poly(methyl methacrylate) branches were isolated and the >c?o peak at 1740 cm^?1 in the infrared spectra of these isolated branches gave definite evidence of grafting. The molecular weight of isolated branches has been determined by viscometry. The probable mechanism of grafting may be at the α-carbon atom of primary alcohol or at a C₂-C₃ glycol group of the anhydro glucose unit or at the hemiacetal group of the end unit of nitrocellulose, as nitrocellulose is formed by the partial nitration of cotton cellulose.     

Effects of ring substituents on the protective properties of self-assembled benzenethiols on copper

The self-assembled monolayers (SAMs) of a series of substituted benzenethiol (BT) molecules, X-C₆H₄-SH (where X = meta-NH₂, ortho-NH₂, para-NH₂, para-NHCOCH₃, para-F, para-CH₃ and para-CH(CH₃)₂), have been prepared by adsorption from a solution onto a fresh copper (Cu) surface pretreated by a nitric acid etch. The corrosion inhibition efficiency of the modified Cu surfaces in a sulfuric acid solution was investigated by electrochemical characterization. The protection afforded by the substituted functional groups on BT is strongly influenced by the type and the position of the substituent on the benzene ring. BT molecules without any substituent group on the ring are ineffective corrosion inhibitors, indicating that the chemical configuration is the key factor in determining the efficacy of the SAMs as barriers to electrochemically corrosive ions. It is further proposed that the steric hindrance offered by the substituted group in the SAMs plays a very important role in determining its barrier properties.     

Sulfidation behavior of Fe-25Cr-20Ni-1.5Al2O3 in simulated coal combustion/gasification environments

The effect of minor addition of -Al₂O₃ dispersoids on the sulfidation behavior of Fe-25Cr-20Ni was investigated over a range of pO₂, 1.13×10^–20 to 1.18×10 ****^–22 atm. at constant pS₂=1.22×10^–8 atm. Fe-25Cr-20Ni and Fe-25Cr-20Ni 1.5 Al₂O₃ with and without preformed oxide scales were exposed to bioxidant gas mixtures H₂/H₂O/H₂S/Ar at 700° C. Both isothermal and cyclic exposures were included. Scales were characterized by a combination of several surface analytical tools. A remarkable improvement in sulfidation resistance is observed in Fe-25Cr-20Ni-1.5Al₂O₃ under the conditions investigated here. This is attributed to the ability of the alloy to form and maintain a predominantly Cr₂O₃ scale with reduced Fe-diffusion and content. Possible scientific reasons for such improvement are discussed. The base alloy, Fe-25Cr-20Ni, fails to develop and retain such a Cr₂O₃ scale and undergoes sulfidation within a few minutes of exposure. The scale breakdown process by sulfidation is explained qualitatively. Experimental evidence suggests that sulfur in the environment enhances Fe-diffusion and content in the scale.     

Performance models of storage contention in cloud environments

We propose simple models to predict the performance degradation of disk requests due to storage device contention in consolidated virtualized environments. Model parameters can be deduced from measurements obtained inside Virtual Machines (VMs) from a system where a single VM accesses a remote storage server. The parameterized model can then be used to predict the effect of storage contention when multiple VMs are consolidated on the same server. We first propose a trace-driven approach that evaluates a queueing network with fair share scheduling using simulation. The model parameters consider Virtual Machine Monitor level disk access optimizations and rely on a calibration technique. We further present a measurement-based approach that allows a distinct characterization of read/write performance attributes. In particular, we define simple linear prediction models for I/O request mean response times, throughputs and read/write mixes, as well as a simulation model for predicting response time distributions. We found our models to be effective in predicting such quantities across a range of synthetic and emulated application workloads.     

Performing Efficient NURBS Modeling Operations on the GPU

We present algorithms for evaluating and performing modeling operations on NURBS surfaces using the programmable fragment processor on the Graphics Processing Unit (GPU). We extend our GPU-based NURBS evaluator that evaluates NURBS surfaces to compute exact normals for either standard or rational B-spline surfaces for use in rendering and geometric modeling. We build on these calculations in our new GPU algorithms to perform standard modeling operations such as inverse evaluations, ray intersections, and surface-surface intersections on the GPU. Our modeling algorithms run in real time, enabling the user to sketch on the actual surface to create new features. In addition, the designer can edit the surface by interactively trimming it without the need for retessellation. Our GPU-accelerated algorithm to perform surface-surface intersection operations with NURBS surfaces can output intersection curves in the model space as well as in the parametric spaces of both the intersecting surfaces at interactive rates. We also extend our surface-surface intersection algorithm to evaluate self-intersections in NURBS surfaces.     

Mobile service oriented architectures for NN-queries

The ever-increasing number of mobile device users has also raised the users’ expectation of mobile services accordingly. This phenomenon has given pressures to the mobile service providers to improve their services in order to stay competitive in the market. The service oriented approach is seen to be a promising scheme for mobile services. This paper presents mobile service oriented architectures for Nearest-Neighbor (NN) queries that are classified into five categories, namely (i) intermittent query mobile services, (ii) continuous query mobile services, (iii) context-aware mobile services, (iv) continuous moving object query mobile services, and (v) data broadcast mobile services. These services incorporate query, location and context-aware services, ontological context model, and broadcast. The proposed architectures are concerned with mobile services for clients on the move requesting services based on their current location, which is arguably the most important feature in a wireless environment. Furthermore, we also discuss the Quality-of-Service (QoS) requirement for mobile services in which request latency time is one of the most important parameters to consider. Some analytical models for query latency measurement are presented and the results are compared with the simulation experiments.     

Characterizing the cross-sectional geometry of thin,non-cylindrical,twisted fibres (spider silk)

Quantitative tensile property evaluation of fibres requires accurate cross-sectional area measurement at a location close to the point of failure. Laser diffraction was evaluated as a non-destructive technique for characterizing the cross-sectional geometry of translucent, non-cylindrical, and/or twisted fibres with thicknesses in the range 2–5 m. Forcibly silked major ampullate fibres from Nephila clavipes spiders were used as specimens. Scanning electron microscopy was used to calibrate the extent to which laser diffraction over- or under-estimates fibre diameter. For the purpose of area measurement, elliptical or oval cross-sections can be treated as though they were circular. We demonstrate mathematically that the area can be obtained to within a few per cent of the true value, if (a) the circle is assigned an equivalent diameter equal to the average of at least four measurements of apparent diameter, (b) the apparent diameter measurements are taken at equal intervals of fibre rotation through a 180° range, and (c) the axial ratio of the cross-section is less than 1.5. The extent to which a non-cylindrical fibre is twisted can be deduced from the periodicity of bright and dark regions that alternate along the length of the fibre in reflected light. Values of cross-sectional ellipticity and area measured from a twisted fibre were smaller than the corresponding values obtained from a twist-free fibre. The apparent diameter of twist-free major ampullate fibre was found to be highly variable-by as much as ±20% relative to the mean within a 0.6 mm length. Therefore, local measurements of area, rather than a value derived from fibre denier, should be used in tensile property evaluation of this material.     

Improved authentication and computation of medical data transmission in the secure IoT using hyperelliptic curve cryptography

The Journal of Supercomputing - Data transmission is a great challenge in any network environment. However, medical data collected from IoT devices need to be transmitted at high speed to ensure...