Perceiving action-relevant properties of tools through dynamic touch: Effects of mass distribution, exploration style, and intention.

At issue in the present series of experiments was the ability to prospectively perceive the action-relevant properties of hand-held tools by means of dynamic touch. In Experiment 1, participants judged object move-ability. In Experiment 2, participants judged how difficult an object would be to hold if held horizontally, and in Experiments 3 and 4, participants rated how fast objects could be rotated. In each experiment, the first and second moments of mass distribution of the objects were systematically varied. Manipulations of wielding speed and orientation during restricted exploration revealed perception to be constrained by (a) the moments of mass distribution of the hand-tool system, (b) the qualities of exploratory wielding movements, and (c) the intention to perceive each specific property. The results are considered in the context of the ecological theory of dynamic touch. Implications for accounts of the informational basis of dynamic touch and for the development of a theory of haptically perceiving the affordance properties of tools are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

锡膏检测--统筹协调各要素

现在有不计其数的文章和实例说明采用二维或三维锡膏检测工艺来控制印刷流程,排除或发现粘贴印刷中出现的错误具有很多优点。作为自动光学检测(AOI)和锡膏检测(SPI)领域的领导者,安捷伦科技公司可以证实大多数公司和人都赞同的一个事实,即当今的制造领域面对日益严峻的芯片规模包装(CSP)挑战,而且部件已经降到0201级,所以制订一定的测试方案非常必要。但是在设计锡膏检测使用模式中碰到的最大问题之一是:在设计一个强有力的生产流程并随后控制这个流程时,要考虑到每一个生产流程有自身的一套变量。在锡膏检测业中最常出现的问题是用户希望只使用一个规则或流程控制模式来建立一个成功的锡膏检测方案。锡膏检测使用模式不同于电子检测和其他过去失败的测试策略,它是一个为用户度身设计的检测战略,需要锡膏检测用户预先工作以建立最佳的流程控制方法。概述了一种可用于成功进行锡膏测试的方法论或思维过程。这一方法论将有助于发现锡膏使用模式,并推进锡膏检测方案合理而有效的实施。     

Engaging in Violence on American Television: A Comparison of Child, Teen, and Adult Perpetrators

This study examines the perpetrators of violence on American television in terms of their chronological age. In particular, the content analysis compares the amount and nature of violence committed by child and teen characters to that committed by adult characters. The results suggest that younger perpetrators are depicted in several ways that pose risks for the child viewer. Compared to adult perpetrators, child perpetrators are more often portrayed as attractive, are less likely to be punished for aggression, and engage in violence that results in fewer negative consequences to their victims. In addition, these younger characters are disproportionately featured on the very programs and channels that are targeted to the child audience. The findings are discussed in terms of children's attention to, and social learning from different types of characters on television.     

Microfluidic deans switch for comprehensive two-dimensional gas chromatography

A microfluidic Deans switch was used as a comprehensive two-dimensional gas chromatography (GCxGC) modulator. The simplicity and wide temperature range of the Deans switch make it a promising alternative to existing modulation techniques. However, the Deans switch is a low duty cycle modulator; that is, it samples only a small portion of the primary column effluent. Like all low duty cycle modulators, the Deans switch produces inconsistent transfer of components from the primary to the secondary column if the primary peaks are undersampled. Theoretical simulations and experimental studies show that the relative standard deviation (RSD) of the fraction of material transferred from the primary column to the secondary column is less than 1% if the modulation ratio is greater than 2.5. But the RSDs increase rapidly as the modulation ratio is decreased below 2.5. Deans switch GCxGC was validated by analyzing the aromatic content of gasoline. A fast analysis (<10 min) produced narrow primary peaks and a modulation ratio of 1.7. The quantitative results were in good agreement with results obtained with differential flow modulation GCxGC and GC/MS, but the RSDs of single-component levels were approximately three times greater. The Deans switch modulator was also used for a slower gasoline analysis (33 min run time) that produced modulation ratios near 5. In this case, the quantitative results and RSDs were in excellent agreement with the differential flow GCxGC and GC/MS results. These studies demonstrate that a Deans switch can be an effective modulator provided that modulation ratios greater than approximately 2.5 are employed.     

Mono- and multilayer formation by diazonium reduction on carbon surfaces monitored with atomic force microscopy "scratching"

Contact mode atomic force microscopy (AFM) was used to intentionally scratch a monolayer deposited on a pyrolyzed photoresist film (PPF). The force was set to completely remove the monolayer but not to damage the underlying PPF surface. A line profile determined across the scratch with tapping mode AFM permitted determination of the monolayer thickness from the depth of the scratch. A statistical process was devised to avoid user bias in determining the monolayer thickness and was used to determine the thickness as a function of derivatization parameters. PPF surfaces modified by reduction of diazonium ions of stilbene, biphenyl, nitrobiphenyl, terphenyl, and nitroazobenzene (NAB) were scratched and their modification layer thicknesses determined. For single-scan derivatizations of 1 mM diazonium ions to -0.6 V versus Ag+/Ag, the biphenyl and stilbene monolayers exhibited thicknesses close to those expected for true monolayers. However, more extensive derivatization resulted in multilayers up to 6.3 nm thick for the case of NAB. Such multilayers imply that electrons are transmitted through the growing film during diazonium reduction, despite the fact that electron tunneling would not be expected to be operative over such long distances. The results are consistent with a conductance increase in the growing film, which yields a partially conductive layer that can support further diazonium ion reduction and additional layer growth.     

Engineered Fibrillar Fibronectin Networks as Three‐Dimensional Tissue Scaffolds

Extracellular matrix (ECM) proteins, and most prominently, fibronectin (Fn), are routinely used in the form of adsorbed pre‐coatings in an attempt to create a cell‐supporting environment in both two‐ and three‐dimensional cell culture systems. However, these protein coatings are typically deposited in a form which is structurally and functionally distinct from the ECM‐constituting fibrillar protein networks naturally deposited by cells. Here, the cell‐free and scalable synthesis of freely suspended and mechanically robust three‐dimensional (3D) networks of fibrillar fibronectin (fFn) supported by tessellated polymer scaffolds is reported. Hydrodynamically induced Fn fibrillogenesis at the three‐phase contact line between air, an Fn solution, and a tessellated scaffold microstructure yields extended protein networks. Importantly, engineered fFn networks promote cell invasion and proliferation, enable in vitro expansion of primary cancer cells, and induce an epithelial‐to‐mesenchymal transition in cancer cells. Engineered fFn networks support the formation of multicellular cancer structures cells from plural effusions of cancer patients. With further work, engineered fFn networks can have a transformative impact on fundamental cell studies, precision medicine, pharmaceutical testing, and pre‐clinical diagnostics.     

Introduction of bridging and pendant organic groups into mesoporous alumina materials

Incorporation of organic functionalities into soft-templated mesoporous alumina was performed via organosilane-assisted evaporation induced self-assembly using aluminum alkoxide precursors and block copolymer templates. This strategy permits one to obtain mesoporous alumina-based materials with tailorable adsorption, surface and structural properties. Isocyanurate, ethane, mercaptopropyl, and ureidopropyl-functionalized mesoporous alumina materials were synthesized with relatively high surface area and large pore volume with uniform and wormhole-like mesopores. The presence of organosilyl groups within these hybrid materials was confirmed by IR or Raman spectroscopy and their concentration was determined by elemental analysis.     

Stable isotope labeling by essential nutrients in cell culture for preparation of labeled coenzyme A and its thioesters

Stable isotope dilution mass spectrometry (MS) represents the gold standard for quantification of endogenously formed cellular metabolites. Although coenzyme A (CoA) and acyl-CoA thioester derivatives are central players in numerous metabolic pathways, the lack of a commercially available isotopically labeled CoA limits the development of rigorous MS-based methods. In this study, we adapted stable isotope labeling by amino acids in cell culture (SILAC) methodology to biosynthetically generate stable isotope labeled CoA and thioester analogues for use as internal standards in liquid chromatography/multiple reaction monitoring mass spectrometry (LC/MRM-MS) assays. This was accomplished by incubating murine hepatocytes (Hepa 1c1c7) in media in which pantothenate (a precursor of CoA) was replaced with [(13)C(3)(15)N(1)]-pantothenate. Efficient incorporation into various CoA species was optimized to >99% [(13)C(3)(15)N(1)]-pantothenate after three passages of the murine cells in culture. Charcoal-dextran-stripped fetal bovine serum (FBS) was found to be more efficient for serum supplementation than dialyzed or undialyzed FBS, due to lower contaminating unlabeled pantothenate content. Stable isotope labeled CoA species were extracted and utilized as internal standards for CoA thioester analysis in cell culture models. This methodology of stable isotope labeling by essential nutrients in cell culture (SILEC) can serve as a paradigm for using vitamins and other essential nutrients to generate stable isotope standards that cannot be readily synthesized.     

Revisiting the effect of marital support on depressive symptoms in mothers and fathers: A genetically informed study.

This article uses a genetically informed design to evaluate whether (1) the well-documented association between marital support and depressive symptoms is accounted for by genetic and/or shared environmental selection, (2) gender differences are found after controlling for selection effects, and (3) parenthood moderates any nonshared environmental relation between depressive symptoms and marital support. We used a sample of 1,566 pairs of same-sexed, married twins from the Australian Twin Registry to evaluate our hypotheses that (1) the predicted effect of marital support on depressive symptoms is not fully an artifact of selection, (2) the etiological sources accounting for this effect differ between husbands and wives, and (3) parenthood status moderates the effect of marital support on depressive symptoms adjusting for selection effects. The results support the first hypotheses. However, after controlling for selection, the effect of marital support on depressive symptoms was not significantly different for husbands and wives. Parenthood moderated the effect of marital support, such that after controlling for selection, marital support is more strongly associated with depressive symptoms for full-time parents than nonfull-time parents. (PsycINFO Database Record (c) 2011 APA, all rights reserved)