The effect of AlTi5B1 grain refinement and different solidification rates on metallurgical and mechanical properties of a secondary AlSi7Cu3Mg alloy is reported. While the Ti content ranges from 0.04 up to 0.225 wt.%, the cooling rate varies between 0.1 and 5.5 °C/s. Metallographic and thermal analysis techniques have been used to quantitatively examine the macro- and microstructural changes occurring with grain refiner addition at various cooling rates. The results indicate that a small AlTi5B1 addition produces the greatest refinement, while no significant reduction of grain size is obtained with a great amount of grain refiner. On increasing the cooling rate, a lower amount of AlTi5B1 master alloy is necessary to produce a uniform grain size throughout the casting. The combined addition of AlTi5B1 and Sr does not produce any reciprocal interaction or effect on primary α-Al and eutectic solidification. The grain refinement improves the plastic behavior of the alloy and increases the reliability of castings, as evidenced by the Weibull statistics. 相似文献
Biomass gasification can be efficiently integrated with Solid Oxide Fuel Cells (SOFCs) to properly deploy the energy content of this renewable source and increasing the ratio of electric to thermal converted energy. The key objective of this work is to analyze in a systematic and wide process the integration of a biomass gasifier process with the SOFC operation. In particular the work aims at identifying the role of SOFC H2 utilization as a basic parameter to maximize the system output and avoid gasifier bad operation issues such as tar production and carbon deposition. An efficient simulation framework is used to that purpose allowing for a detailed analysis of the influence of key driving parameters. The performance of the integrated system is thoroughly analyzed in the range of 1–2 kW electric power by also varying the input biomass characteristics in terms of Moisture Content (MC). Results show how a variation of the SOFC H2 utilization, a parameter whose effects are also correlated with the gasifier air requirement, affects electrical power output also depending on the biomass Moisture Content. 相似文献
The results of a comparative numerical study aimed at assessing the mixing performance of planar zig-zag, curvilinear, and square-wave microchannels of square cross-sections is presented in the paper. To evaluate the mixing enhancement characteristics of each geometry, suitable mixing indices are computed at different axial locations of a single repetitive module of each microchannel when fed with two equal streams of fluid having the same thermophysical properties but different solute concentrations. To separate the effects of the geometry from those of molecular diffusion, entrance flow, and channel length, the mixing in straight microchannels of the same length is also evaluated for comparison. Reynolds numbers in the range from 5 to 150 are considered. The study is performed both with reference to a fixed Péclet number, equal to 2500 and obtained by scaling the diffusion coefficient when varying the Reynolds number, and to a fixed diffusion coefficient, yielding a constant Schmidt number of 16.6. Pressure drops are also calculated. All numerical simulations are carried out using an in-house finite element code for the solution of all model equations. 相似文献
In this paper our previous researches dealing with compatibility, thermoanalytical characterization, the kinetics of thermal degradation of acetaminophen, either pure or contained in some commercial pharmaceutical formulations, have found applications outlets. In a previous investigation the possible interactions between acetaminophen and four excipients contained in the commercial pharmaceutical formulations were tested. As a continuation of this research in the present study an analytical method based on differential scanning calorimetry (DSC) was applied to determine the acetaminophen content of four commercial pharmaceutical formulations. For a fifth drug it was shown that the method is not applicable owing to observed incompatibility with one of the excipients. Finally, the analytical results obtained were compared with those derived from two UV spectrophotometric methods (one, i.e., “direct method,” recommended by the Pharmacopeia and the other based on the first-order derivative UV spectra). 相似文献
Herein we report novel pyrrole‐ and benzene‐based hydroxamates ( 8 , 10 ) and 2′‐aminoanilides ( 9 , 11 ) bearing the tert‐butylcarbamate group at the CAP moiety as histone deacetylase (HDAC) inhibitors. Compounds 8 b and 10 c selectively inhibited HDAC6 at the nanomolar level, whereas the other hydroxamates effected an increase in acetyl‐α‐tubulin levels in human acute myeloid leukemia U937 cells. In the same cell line, compounds 8 b and 10 c elicited 18.4 and 21.4 % apoptosis, respectively (SAHA: 16.9 %), and the pyrrole anilide 9 c displayed the highest cytodifferentiating effect (90.9 %). In tests against a wide range of various cancer cell lines to determine its antiproliferative effects, compound 10 c exhibited growth inhibition from sub‐micromolar (neuroblastoma LAN‐5 and SH‐SY5Y cells, chronic myeloid leukemia K562 cells) to low‐micromolar (lung H1299 and A549, colon HCT116 and HT29 cancer cells) concentrations. In HT29 cells, 10 c increased histone H3 acetylation, and decreased the colony‐forming potential of the cancer cells by up to 60 %. 相似文献
The efficiency of epoxy/CNT nanocomposites as photocatalyst on adsorbed, aqueous and gas phases is investigated. Epoxy films containing SWNTs in the range between 0.1 and 0.3 wt% are prepared by means of UV‐induced polymerization and the achieved materials are used as photocatalysts on adsorbed, aqueous, and gas phases. The activity of this new photocatalytic materials is evaluated in the adsorbed state by using the methylene blue target molecule, in the aqueous phase by following the photodegradation of phenol and 3,5‐dichlorophenol, and in the gas phase using nitrogen monoxide as probe molecule. It is demonstrated that the catalyst is suitable for both oxidative and reductive degradation reactions.