Energy-aware lazy scheduling algorithm for energy-harvesting sensor nodes

The main problem in dealing with energy-harvesting (EH) sensor nodes is represented by the scarcity and non-stationarity of powering, due to the nature of the renewable energy sources. In this work, the authors address the problem of task scheduling in processors located in sensor nodes powered by EH sources. Some interesting solutions have appeared in the literature in the recent past, as the lazy scheduling algorithm (LSA), which represents a performing mix of scheduling effectiveness and ease of implementation. With the aim of achieving a more efficient and conservative management of energy resources, a new improved LSA solution is here proposed. Indeed, the automatic ability of foreseeing at run-time the task energy starving (i.e. the impossibility of finalizing a task due to the lack of power) is integrated within the original LSA approach. Moreover, some modifications have been applied in order to reduce the LSA computational complexity and thus maximizing the amount of energy available for task execution. The resulting technique, namely energy-aware LSA, has then been tested in comparison with the original one, and a relevant performance improvement has been registered both in terms of number of executable tasks and in terms of required computational burden.     

Multi-hazard loss analysis of tall buildings under wind and seismic loads

This paper presents a framework for life-cycle loss estimation for non-structural damage in tall buildings under wind and seismic loads. Life-cycle cost analysis is a useful design tool for decision- makers, aimed at predicting monetary losses over the lifetime of a structure, accounting for uncertainties involved in the problem definition. For tall buildings, sensitive to dynamic excitations like earthquake and wind, it can be particularly suitable to base design decisions not only on initial cost and performance but also on future repair expenses. The proposed approach harmonises the procedures for intervention costs evaluation of structures subjected to multiple-hazards, taking into account the peculiar differences of wind and earthquake, in terms of load characterisation, type and evolution of damage. Relative effect of the two hazards on damage to drift- and acceleration-sensitive non-structural elements are examined. The influence of uncertainty in structural damping is also taken into account. It is shown that, although it is commonly believed that the design of a given structure is usually dominated by either winds or earthquakes, when LCC-based design is performed, both winds and earthquakes may be important.     

Soil Moisture Measurements: Comparison of Instrumentation Performances

It has long been recognized that reliable, robust, and automated instrumentation for the measurement of soil moisture content can be extremely useful, if not essential, in hydrological, environmental, and agricultural applications. A number of automated techniques for point measurement of soil water content have been developed to operational level over the past few decades. While each of those techniques has been individually calibrated by the gravimetric method, typically under laboratory conditions, there have been few studies that made a direct comparison between the various techniques, particularly under field conditions. This paper compares ECH2O probes, EC-5 (both sensors based on capacitance measurements, developed by Decagon Devices) and time domain reflectometer sensors (CS616 Campbell Scientific Water Content Reflectometer), with gravimetric data and with each other, under field conditions. Data were collected during two field experiments characterized by different soils and a wide range of soil moistures, resulting from irrigation/drying cycle. Results show that all the tested probes give acceptable results after being calibrated in the field. The capacitive sensors can be used in each type of soil with the same calibration equation, independently from depth, with root mean square error (RMSE) ranging between 2.5 and 3.6%. Time Domain Reflectometry probes showed a dependence on depth but a lower RMSE (1.6%).     

Relation of anodic and cathodic performance to pH variations in membraneless microbial fuel cells

One-compartment (membraneless) microbial fuel cells (MFCs) are effective tools to test new bio-technology at a laboratory level. More efforts in MFC design and materials are necessary to move from laboratory tests to real applications.     

Hydrogen production by photoreforming of formic acid in aqueous copper/TiO2 suspensions under UV-simulated solar radiation at room temperature

A new photocatalytic system consisting of two subsystems – Cu⁰/Cl⁻/H⁺/UV_ssr and Cu^II/H⁺/TiO₂/formic acid/UV_ssr – is proposed as a tool to produce hydrogen by reforming an organic species. Formic acid is used as hole scavenger during the experimental runs. An experimental campaign is carried out to demonstrate that the systems can generate hydrogen and to assess how the generation rate depends upon experimental conditions such as copper and TiO₂ loads, chloride and proton ions, and formic acid concentrations. A strong dependence of the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem reactivity upon copper load, chloride concentration and pH is observed. The investigation on the complete system, starting from zero-valent copper, indicates that the addition of TiO₂ and formic acid to the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem does not result into any gain in terms of hydrogen produced and, renders the system totally unreactive under some conditions. On the other hand, when a complete system, starting from cupric ions, is adopted, hydrogen production is observed also for prolonged reaction times with a surplus of hydrogen production with respect to that generated by the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem with the same Cu⁰ starting load and in absence of TiO₂ and sacrificial agent.     

Optimization of the working cycle for a hydrogen production and power generation plant based on aluminum combustion with water

The working cycle of a novel hydrogen and power generation system based on aluminum combustion with water is analyzed in order to evaluate the best performance in terms of energy conversion efficiency. The system exploits the exothermic reaction between aluminum and steam and produces thermal power for a super-heated steam cycle and hydrogen as a by-product of the reaction.     

Application of empirical modelling in multi-layers membrane manufacturing

Multistructured membranes based on ultrafine fibers of polymethylmethacrylate-co-methacrylic acid (PMMA-co-MAA) and TiO₂ nanoparticles have been obtained by electrohydrodynamic (EHD) technologies, for active filter media manufacturing. Process optimization of the nanofibers based layers has been investigated by response surface methodology (RSM) in order to predict the domain of the parameters where the smallest fiber diameter can be achieved. A quantitative relationship between electrospinning parameters and the responses (mean diameter and standard deviation) was established and then the final multi-layers structure of nanofibers and nanoparticles has been achieved for a controlled and robust process. The nanostructured membranes have been characterized by SEM imaging, EDAX, TGA analysis and water vapour permeability and their photocatalytic activity has been tested on VOCs degradation.     

Degradation and stabilization of poly(3-hexylthiophene) thin films for photovoltaic applications

Polymer-based solar cells (PSC) represent a promising technology in the field of photovoltaics, although they still suffer from poor environmental stability. Poly(3-hexylthiophene) (P3HT) is one of the most commonly employed electron-donor materials for the preparation of the photo-active layer of PSC and it is known to undergo degradation when exposed to light. In this work, the degradation of P3HT was studied by irradiating polymer films by means of simulated sunlight. The results of this study highlighted a remarkable instability of P3HT. Substantial modifications of the infrared as well as of the UV–Vis spectra of the polymer were reported and a degradation pathway was suggested, in agreement with recent literature results. In order to stabilize the structure, two additives were evaluated namely a standard Hindered Amine Light Stabilizer (HALS) and Multi-Walled Carbon Nanotubes (MWCNT). The addition of MWCNT appeared to significantly reduce the rate of degradation.     

Chemical Communication and Reproduction Partitioning in Social Wasps

Social wasps encompass species displaying diverse social organization regarding colony cycle, nest foundation, caste differences (from none to significant dimorphism) and number of reproductive queens. Current phylogenetic data suggests that sociality occured independently in the subfamily Stenogastrinae and in the Polistinae+Vespinae clade. In most species, including those with the simplest social organization, colony reproduction is monopolised by a single or few females. Since their nest mates can also develop ovaries and lay eggs, dominant females must somehow inhibit them from reproducing. Physical interactions in the form of open aggression or, usually, ritualised dominance by the fertile females contribute to fertility inhibition in several species, but it is unlikely to function in large colonies. In the latter case, reproduction within the colony is likely to be regulated through pheromones. Relatively little is known about these semiochemicals. Studies on all the three social wasp subfamilies, revealed that cuticular hydrocarbon components differ in abundance between egg-laying and not egg-laying females and that their composition depends on fertility status. In several species, females have been reported to manifestly react towards females with activated ovaries, but there is little evidence to support the hypothesis that fertile individuals are either recognized through their CHC composition, or that over-represented CHC constituents can inhibit fertility. Moreover, very little information exists on the possibility that exocrine glands release fertility signals or chemicals inhibiting fertility.