Sintering behavior,microstructure and thermoelectric properties of calcium cobaltite thick films for transversal thermoelectric multilayer generators

The sintering behavior and the thermoelectric performance of Ca₃Co₄O₉ multilayer laminates were studied, and a multilayer thermoelectric generator was fabricated. Compacts and multilayer samples with anisotropic microstructure and residual porosity were obtained after conventional sintering at 920 °C, whereas dense and isotropic multilayer samples were prepared by firing at 1200 °C and reoxidation at 900 °C. A hot-pressed sample has a dense and anisotropic microstructure. Samples sintered at 920 °C exhibit low electrical conductivity due to the low density, whereas the Seebeck coefficient is not sensitive to preparation conditions. However, thermal conductivity of multilayers is very low, and, hence acceptable ZT values are obtained. A transversal multilayer thermoelectric generator (TMLTEG) was fabricated by stacking layers of Ca₃Co₄O₉ green tapes, AgPd conductor printing, and co-firing at 920 °C. The TMLTEG has a power output of 3 mW at ΔT = 200 K in the temperature interval of 25 °C to 300 °C.     

A hierarchical approach to simulate the packing density of particle mixtures on a computer

In many fields of materials science it is important to know how densely a particle mixture can be packed. The “packing density” is the ratio of the particle volume and the volume of the surrounding container needed for a random close packing of the particles. We present a method for estimating the packing density for spherical particles based on computer simulations only, i.e. without the need for additional experiments. Our method is particularly suited for particle mixtures with an extremely wide range of particle diameters as they occur e.g. in modern concrete mixtures. A single representative sample from such mixtures would be much larger than can be handled on present standard computers. In our hierarchical approach the diameter range is therefore divided into smaller intervals. Samples from these limited diameter intervals are drawn and their packing density is estimated from a simulated packing. The results are used to “fill” the interstices in the sample from the next larger particle interval. To account for the interaction between particles of different sizes we include larger particles into the sample of smaller ones. The larger ones act as part of the boundary during the packing. Thus we obtain more realistic estimates of how dense a fraction of particles can be packed within the whole mixture. The focus of this paper is on the divide-and-conquer approach and on how the simulation results from the fractions can be collected into an overall estimate of the packing density. We do not go into details of the simulation technique for the single packing. We compare our results to some experimental data to show that our method works at least as good as the classical analytical models like CPM without the need for any experiments.     

Logical Equivalence for Subtyping Object and Recursive Types

Subtyping in first order object calculi is studied with respect to the logical semantics obtained by identifying terms that satisfy the same set of predicates, as formalised through an assignment system. It is shown that equality in the full first order ς-calculus is modelled by this notion, which in turn is included in a Morris-style contextual equivalence. U. de’Liguoro’s research was partially supported by project PRIN’05 prot. 2005015785_003.     

Outcome of moderate carotid artery stenosis in patients who are asymptomatic

PURPOSE: The incidence rate of disease progression and stroke after the diagnosis of a moderate (50% to 79%) carotid stenosis was determined by means of color-flow duplex scanning. METHODS: During a 4-year period, 344 male veterans with moderate internal carotid artery stenoses, on one or both sides, were examined at regular intervals for a mean period of 25 months. Carotid color-flow scans were obtained semiannually. Clinical follow-up was performed to determine the incidence rate of amaurosis fugax, transient ischemic attacks, nonhemispheric symptoms, and strokes. RESULTS: New neurologic symptoms developed in 75 patients (21.8%). Fifty-one (14.8%) had ipsilateral symptoms during follow-up: 18 amaurosis fugax (5.2%), 14 transient ischemic attacks (4%), 5 nonhemispheric symptoms (1.4%), and 14 strokes (4%). Twenty-four patients (6.9%) had contralateral symptoms: 20 strokes (5.8%) and 4 transient ischemic attacks (1.2%). Life-table analysis showed that the annual rate of ipsilateral neurologic events was 8.1%, and the annual rate of stroke was 2.1%. Seventy-five patients (22%) died in the follow-up period. Disease progression to 80% to 99% stenosis or occlusion occurred in 71 of 458 vessels (15.5%). The internal carotid arteries that showed evidence of disease progression had a significantly higher initial peak systolic velocity (251 vs 190 cm/s; P <.0001) and end diastolic velocity (74 vs 52 cm/s; P < 0.0001). Black patients and patients with ischemic heart disease were at a higher risk for disease progression. We could not identify any atherosclerotic risk factors that reliably predicted patients in whom future ipsilateral neurologic symptoms were more likely to develop. However, there was an increased risk of stroke associated with progression of disease. CONCLUSION: Patients who are asymptomatic and who have moderate carotid stenoses are at significant risk for neurologic symptoms and death, but have a relatively low incidence rate of ipsilateral events. The initial flow characteristics in the stenotic vessel are predictive of future disease progression, but they are not helpful in identifying patients in whom symptoms will develop.     

Evaluation of basidiomycetous fungi for pretreatment of contaminated soil

BACKGROUND: For most dioxin‐contaminated sawmill soils, combustion is recommended. However, the process may be inefficient if the soil has a high organic matter content. The use of saprotrophic basidiomycetous fungi is an alternative for pretreatment of this kind of soil. A total of 147 fungi were evaluated for their ability to grow in sawmill soil. From this screening, the best soil colonizing fungi were selected to study their enzyme activities and degradation of soil organic matter. Pine (Pinus sylvestris) bark was used as a co‐substrate to propagate the fungi into the soil. The activities of manganese peroxidase (MnP), laccase, endo‐1,4‐β‐glucanase, endo‐1,4‐β‐xylanase, and endo‐1,4‐β‐mannanase were analysed from the inocula and fungal treated soil. RESULTS: The screening revealed that 56 out of 147 fungi were able to grow in non‐sterile soil, and most of them were litter‐decomposing fungi (LDF). In pine bark cultures, the highest enzyme activities were observed with Phanerochaete velutina, which produced 5 U g^?1 of MnP. The activity of endo‐1,4‐β‐glucanase was generally higher than that of other hydrolytic enzymes. The highest carbon loss from soil with a high organic matter content was achieved by P. velutina (3.4%) and Stropharia rugosoannulata (2.4%). CONCLUSIONS: Many LDF, and in addition the white‐rot fungus P. velutina, are potential degraders of soil organic matter since they showed good growth and respiratory activity. Pine bark was a suitable lignocellulosic co‐substrate and a good promoter of MnP activity. Copyright © 2009 Society of Chemical Industry     

On the correctness of upper layers of automotive systems

Formal verification of software systems is a challenge that is particularly important in the area of safety-critical automotive systems. Here, approaches like direct code verification are far too complicated, unless the verification is restricted to small textbook examples. Furthermore, the verification of application logic is of limited use in industrial context, unless the underlying operating system and the hardware are verified, too. This paper introduces a generic model stack, allowing the verification of all system layers as well as the concrete application models being used in the upper layers. The presented models and proofs close the gap between the correctness proof for the lower layers of car electronics developed at the Saarland University and the verification procedure for distributed applications developed at the Technische Universität München.     

Horn equational theories and paramodulation

A language of equational programs together with an inference system, based on paramodulation is defined. The semantics of the language is given with respect to least models, least fixpoints and success sets and its soundness and completeness is proven using fixpoint theory. The necessity of the functional reflexive axioms is investigated in detail. Finally, the application of these ideas to term rewriting systems is outlined by discussing directed paramodulation and narrowing.     

Metrological traceability chain for pH measurement results

The extent to which technical barriers to international trade caused by non-acceptance of chemical measurement results can be removed, largely depends on the success in building up national and international traceability structures also in metrology in chemistry. Achieving metrological comparability of measurement results requires the definition of metrological calibration hierarchies providing metrological traceability chains which enable the establishment of metrological traceability of measured quantity values to a common metrological reference [1]. For pH, over the last decade, work has been carried out in a number of countries to build up meteorological calibration hierarchies within a national framework. An overview on the metrological traceability chain for pH is given with focus on the primary measurement procedure of pH.