Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion

A technique invented in the former Soviet Union and recently introduced in the United States, called equal channel angular extrusion (ECAE), produces intense and uniform deformation by simple shear and is applied to 25 × 25 × 152-mm billets of Cu 101 and Al 3003. Microcrystalline structures with a grain size of 0.2 to 0.4 μm are created during room-temperature multipass ECAE deformation for true strains lying in the range ε=2.31 to 9.24. Evidence shows that intense simple shear deformation promotes dynamic or continuous recrystallization by subgrain rotation. The effects of the number of extrusion passes and deformation route for Cu 101, and the deformation route after four passes for Al 3003, are studied. Increasing the number of ECAE passes in Cu 101 causes strength to reach saturation and grain refinement stabilization after four passes (true strain of 4.68), and subgrain misorientation to increase as the number of passes increases. For multipass ECAE with billet orientation constant (route A) or rotated 90 deg between all passes (route B), two levels of structures are created inside the original grains: shear bands (first level) and very fine subgrains (second level) within the shear bands. For a billet rotation of 180 deg between passes (route C), an unusual event is observed. At each even numbered pass, shear bands nearly disappear and only subgrains are present inside the original grains. Route B gives the highest strength, whereas route C produces a more equiaxed and stable microstructure. Subsequent static recrystallization increases the average grain size to 5 to 10 μm.     

Real-time Volumetric Deformable Models for Surgery Simulation using Finite Elements and Condensation

This paper discusses the application of 3D solid volumetric Finite Element models to surgery simulation. In particular it introduces three new ideas for solving the problem of achieving real-time performance for these models. The simulation system we have developed is described and we demonstrate real-time deformation using the methods developed in the paper.     

Picosecond photonics

The basic principles of new ultrafast all-optical processing devices are experimentally demonstrated. One type of device relies on the interaction between an input signal and two colliding spatial solitons of a different wavelength in a planar waveguide with third order nonlinearity. The devices which belong to the second type are based on second order nonlinear interactions (degenerate difference frequency mixing) and operate as ultrafast sampling gate or as deflector or as phase conjugator. We report in a second part the design and performances of a laser that could be used to trigger the above mentionned systems. The laser cavity has two arms and two separate diode-pumped laser crystals (Nd/YAG). The two laser beams are coherently recombined inside the resonator into a single Gaussian beam. Picosecond pulses emission is ensured by passive mode-locking thanks to a nonlinear mirror set-up.     

FSM-based conformance testing methods: A survey annotated with experimental evaluation

The development of test cases is an important issue for testing software, communication protocols and other reactive systems. A number of methods are known for the development of a test suite based on a formal specification given in the form of a finite state machine. In this paper, we overview and experiment with these methods to assess their complexity, applicability, completeness, fault detection capability, length and derivation time of their test suites. The experiments are conducted on randomly generated specifications and on two realistic protocols called the Simple Connection Protocol and the ITU-T V.76 Recommendation.     

A statistical method for detecting logging-related canopy gaps using high-resolution optical remote sensing

In tropical rainforests, the sustainability of selective logging is closely linked to the extent of collateral stand damage. The capacity to measure the extent of such damage is essential for calculating carbon emissions due to forest degradation under the Reducing Emissions from Deforestation and Forest Degradation (REDD+) process. The use of remote sensing to detect canopy gaps in tropical rainforests is an attractive alternative to ground surveys, which are laborious and imprecise. In French Guiana, the detection of logging-related gaps using very high spatial resolution optical satellite images produced by the Système Pour l'Observation de la Terre (SPOT) 5 sensor is carried out by Office National des Forêts (ONF) (French National Forestry Agency). Gaps are detected using a segmentation method based on computer-assisted photointerpretation. Detection has been automated to improve and accelerate the process. We developed an automatic method, which involves estimating segmentation thresholds using a statistical approach. The principle of the method presented in this article is to model the forest's spectral signature by using a Gaussian distribution and calculate a divergence between that theoretical signature and the image histogram in order to detect gaps that constitute a reduction of forest cover. The segmentation threshold between gap and forest is thus no longer defined in the original radiometric area but as a discrepancy between theoretical distribution and histogram. Computing the divergence to define the threshold made it possible to efficiently automate the detection of all gaps and skid trails with a surface area greater than 100 m². The proportion of misclassified points measured during field surveys is 12%, which is a high level of precision. The proportion of misclassified points obtained is 12%. This tool could be used to assess the quality of logging operations or biomass loss in other areas where the forest is undergoing deterioration while still remaining predominant in the landscape.     

Carbon nanotube based photocathodes

This paper describes a novel photocathode which is an array of vertically aligned multi-walled carbon nanotubes (MWCNTs), each MWCNT being associated with one p-i-n photodiode. Unlike conventional photocathodes, the functions of photon-electron conversion and subsequent electron emission are physically separated. Photon-electron conversion is achieved with p-i-n photodiodes and the electron emission occurs from the MWCNTs. The current modulation is highly efficient as it uses an optically controlled reconfiguration of the electric field at the MWCNT locations. Such devices are compatible with high frequency and very large bandwidth operation and could lead to their application in compact, light and efficient microwave amplifiers for satellite telecommunication. To demonstrate this new photocathode concept, we have fabricated the first carbon nanotube based photocathode using silicon p-i-n photodiodes and MWCNT bunches. Using a green laser, this photocathode delivers 0.5?mA with an internal quantum efficiency of 10% and an I(ON)/I(OFF) ratio of 30.     

Contribution à la modélisation de lignes hyperfréquences supraconductrices à haute température critique par la méthode FDTD

The purpose of this study is to determine the electrical behaviour of high-Tc superconductor microstrip lines. TheFdtd method is used to put into discrete terms Maxwell’s equations. The two-fluid model has been chosen to describe the behaviour of the superconductor. The variation of electrical parameters such as surface resistance as a function of frequency up to 60 GHz is presented.     

The structure-function relationship of the lipases from Pseudomonas aeruginosa and Bacillus subtilis

Within the BRIDGE T-project on lipases we investigate the structure-functionrelationships of the lipases from Bacillus subtilis and Pseudomonasaeruginosa. Construction of an overproducing Bacillus. strainallowed the purification of > 100 mg lipase from 30 l culturesupernatant. After testing a large variety of crystallizationconditions, the Bacillus lipase gave crystals of reasonablequality in PEG-4000 (38-45%), Na₂SO₄ and octyl-ß-glucosideat 22°C, pH 9.0. A 2.5 Å; dataset has been obtainedwhich is complete from 15 to 2.5 A resolution. P.aeruginosawild-type strain PAC1R was fermented using conditions of maximumlipase production. More than 90% of the lipase was cell boundand could be solubilized by treatment of the cells with TritonX-100. This permitted the purification of 50 mg lipase. So far,no crystals of sufficient quality were obtained. Comparisonof the model we built for the Pseudomonas lipase, on the basisof sequences and structures of various hydrolases which werefound to possess a common folding pattern (/ß hydrolasefold), with the X-ray structure of the P.glumae lipase revealedthat it is possible to correctly build the structure of thecore of a protein even in the absence of obvious sequence homologywith a protein of known 3-D structure.