Mass spectrometry investigations on electrolyte degradation products for the development of nanocomposite electrodes in lithium ion batteries

In the continuing challenge to find new routes to improve the performance of commercial lithium ion batteries cycling in alkyl carbonate-based electrolyte solutions, original designs, and new electrode materials are under active worldwide investigation. Our group has focused on the electrochemical behavior of a new generation of nanocomposite electrodes showing improved capacities (up to 3 times the capacity of conventional electrode materials). However, moving down to "nanometric-scale" active materials leads to a significant increase in electrolyte degradation, compared to that taking place within commercial batteries. Postmortem electrolyte studies on experimental coin cells were conducted to understand the degradation mechanisms. Structural analysis of the organic degradation products were investigated using a combination of complementary high-resolution mass spectrometry techniques: desorption under electron impact, electrospray ionization, and gas chromatography coupled to a mass spectrometer equipped with electron impact and chemical ionization ion sources. Numerous organic degradation products such as ethylene oxide oligomers (with methyl, hydroxyl, phosphate, and methyl carbonate endings) have been characterized. In light of our findings, possible chemical or electrochemical pathways are proposed to account for their formation. A thorough knowledge of these degradation mechanisms will enable us to propose new electrolyte formulations to optimize nanocomposite-based lithium ion battery performance.     

Microscopic and spectroscopic characterization of paintbrush-like single-walled carbon nanotubes

Understanding and controlling the chemical reactivity of carbon nanotubes (CNTs) is a fundamental requisite to prepare novel nanoscopic structures with practical uses in materials applications. Here, we present a comprehensive microscopic and spectroscopic characterization of carbon nanotubes which have been chemically modified. Specifically, scanning tunneling microscopy (STM) investigations of short-oxidized single-walled carbon nanotubes (SWNTs) functionalized with aliphatic chains via amide reaction reveal the presence of bright lumps both on the sidewalls and at the tips. The functionalization pattern is consistent with the oxidation reaction which mainly occurs at the nanotube tips. Thermogravimetric analysis (TGA), steady-state electronic absorption (UV-vis-NIR), and Raman spectroscopic studies confirm the STM observations.     

优化现代太阳能装置

文章介绍了太阳能逆变器以及逆变器输出电流的直流偏移电流测量。     

Mechanical,barrier, and interfacial properties of biodegradable composite films made of methylcellulose and poly(caprolactone)

Methylcellulose (MC) films were prepared by casting from its 1% aqueous solution containing 0.5% vegetable oil, 0.25% glycerol, and 0.025% Tween^®80. Poly(caprolactone) (PCL) films were prepared by compression molding from its granules. Biodegradable composite films were fabricated using MC film as reinforcing agent and PCL as the matrix material by compression molding. One layer of MC film was reinforced with two layers of PCL films. The MC content in the composites was varied from 10 to 50% by weight. Mechanical, barrier, and degradation properties of PCL, MC, and composite films were evaluated. The values of puncture strength (PS), puncture deformation (PD), viscoelasticity (Y) coefficient, and water vapor permeability (WVP) of the composites (50% MC content) were found to be 124.3 N/mm, 3.2 mm, 31%, and 2.6 g·mm/m²·day·kPa, respectively. Oxygen transmission rate (OTR) of PCL, MC, and composites (50% MC) were found to be 175, 25, 22 cc/m²/d, respectively, which indicated that composite films showed significantly lower OTR than PCL films. Degradation tests of the composite films (50% MC) were performed for 6 weeks in aqueous medium (at 25°C), and it was found that composites lost its mass slowly with time. After 6 weeks, mass and PS of the composites were decreased to 13.4 and 12%, respectively. Composite interface was studied by scanning electron microscopy (SEM). The MC film had good adhesion with PCL matrix during compression molding and suggested strong interface of the composite system. SEM image after 6 weeks of degradation showed some openings in the interface and revealed slow degradation of the MC films. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Application of Selected Natural Antimicrobial Formulations for the Control of Food Pathogens in Fresh-Cut Cauliflower

In recent years, research on biopolymer based-coating containing natural antimicrobial agents is developing significantly. The objective of this study was to evaluate the antimicrobial efficiency of six formulations containing pre-selected natural antimicrobial compounds against Listeria monocytogenes, Escherichia coli O 157：H7, Salmonella typhimurium, the total bacteria and total yeasts and molds in cauliflower. Each formulation was subjected to a sensory test in parallel to microbiological analysis and the efficiency during storage at 5 ℃ was evaluated for the two best formulations, based on their ability to eliminate the target microorganisms. Both formulations were able to reduce all pathogens and total flora below detectable levels after 24 h of storage at 5 ℃. Using washing or spraying treatments, the two formulations were able to reduce Listeria to undetectable levels for 3 d. This efficiency was extended to 7 d when the formulations were incorporated into an edible coating. Washing treatment with the two formulations was also able to limit the growth of yeast and molds at levels lower than 2 log, for more than 7 d. The population of E. coli was reduced to below the detection limit during 14 d of storage, after washing treatment with the two formulations. The spraying treatment of cauliflower with the formulations allowed the use of very small amounts of antimicrobials while maintaining a fairly good efficiency, greatly reducing the potential costs of implementing this method in the industry. Future research may focus on development of nanoemulsion of antimicrobial formulations based on the developed antimicrobial formulations in this study to improve the better coating efficiency.     

Sectoral trends in global energy use and greenhouse gas emissions

Integrated assessment models have been used to project both baseline and mitigation greenhouse gas emissions scenarios. Results of these scenarios are typically presented for a number of world regions and end-use sectors, such as industry, transport, and buildings. Analysts interested in particular technologies and policies, however, require more detailed information to understand specific mitigation options in relation to business-as-usual trends. This paper presents sectoral trend for two of the scenarios produced by the Intergovernmental Panel on Climate Change's Special Report on Emissions Scenarios. Global and regional historical trends in energy use and carbon dioxide emissions over the past 30 years are examined and contrasted with projections over the next 30 years. Macro-activity indicators are analyzed as well as trends in sectoral energy and carbon demand. This paper also describes a methodology to calculate primary energy and carbon dioxide emissions at the sector level, accounting for the full energy and emissions due to sectoral activities.     

Horizontal and vertical transmissions in the US oil supply chain

Oil prices, inventory levels, and utilization rates are influenced by changes that are transmitted horizontally and/or vertically through the energy supply chain. We define horizontal transmissions as changes that are generated by linkages among fuels at a similar stage of processing while vertical transmissions are changes that are generated by upstream/downstream linkages in the oil supply chain. Here, we investigate vertical and horizontal transmissions by estimating vector error correction models (VECMs) that represent relationships among the price of crude oil, US refinery utilization rates, US stocks of crude oil, US stocks of motor gasoline, the US price of motor gasoline, and the US price of a substitute fuel, natural gas. Causal relationships estimated from both weekly and quarterly observations indicate that the price of crude oil is an important gateway for disturbances to the oil supply chain. Impulse response functions indicate that disturbances to crude oil prices ripple down the oil supply chain and affect inventory behaviors, refinery utilization rates, and the price of motor gasoline, and are transmitted laterally to the natural gas market.     

Long Distance Enhancement of Nonlinear Optical Properties Using Low Concentration of Plasmonic Nanostructures in Dye Doped Monolithic Sol–Gel Materials

Monolithic sol–gel silica composites incorporating platinum‐based chromophores and various types of gold nanoparticles (AuNPs) are prepared and polished to high optical quality. Their photophysical properties are investigated. The glass materials show well‐defined localized surface plasmon resonance (SPR) absorbance from the visible to NIR. No redshifts of the AuNP plasmon absorption peaks due to the increase in nanoparticle doping concentration are observed in the glasses, proving that no or very small SPR coupling effects occur between the AuNPs. At 600 nm excitation, but not at 532 nm, the AuNPs improve the nonlinear absorption performance of glasses codoped with 50 × 10^?3 m of a Pt‐acetylide chromophore. The glasses doped with lower concentrations of AuNPs (2–5 μm average distance) and 50 × 10^?3 m in chromophore, show a marked improvement in nonlinear absorption, with no or only small improvement for the more highly AuNP doped glasses. This study shows the importance of excitation wavelength and nanoparticle concentration for composite systems employing AuNPs to improve two‐photon absorption of chromophores.     

Device-based decision-making for adaptation of three-dimensional content

The goal of this research was the creation of an adaptation mechanism for the delivery of three-dimensional content. The adaptation of content, for various network and terminal capabilities – as well as for different user preferences, is a key feature that needs to be investigated. Current state-of-the art research of the adaptation shows promising results for specific tasks and limited types of content, but is still not well-suited for massive heterogeneous environments. In this research, we present a method for transmitting adapted three-dimensional content to multiple target devices. This paper presents some theoretical and practical methods for adapting three-dimensional content, which includes shapes and animation. We also discuss practical details of the integration of our methods into MPEG-21 and MPEG-4 architectures.