Radiometric normalization and image mosaic generation of ASTER thermal infrared data: An application to extensive sand sheets and dune fields

Data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) have a significant advantage over previous datasets because of the combination of high spatial resolution (15-90 m) and enhanced multispectral capabilities, particularly in the thermal infrared (TIR) atmospheric window (8-12 μm) of the Earth where common silicate minerals are more easily identified. However, the 60 km swath width of ASTER can limit the effectiveness of accurately tracing large-scale features, such as eolian sediment transport pathways, over long distances. The primary goal of this paper is to describe a method for generating a seamless and radiometrically accurate ASTER TIR mosaic of atmospherically corrected radiance and from that, extract surface emissivity for arid lands, specifically, sand seas. The Gran Desierto in northern Sonora, Mexico was used as a test location for the radiometric normalization technique because of past remote sensing studies of the region, its compositional diversity, and its size. A linear approach was taken to transform adjacent image swaths into a direct linear relationship between image acquisition dates. Pseudo-invariant features (PIFs) were selected using a threshold of correlation between radiance values, and change-pixels were excluded from the linear regression used to determine correction factors. The degree of spectral correlation between overlapping pixels is directly related to the amount of surface change over time; therefore, the gain and offsets between scenes were based only on regions of high spectral correlation. The result was a series of radiometrically normalized radiance-at-surface images that were combined with a minimum of image edge seams present. These edges were subsequently blended to create the final mosaic. The advantages of this approach for TIR radiance (as opposed to emissivity) data include the ability to: (1) analyze data acquired on different dates (with potentially very different surface temperatures) as one seamless compositional dataset; (2) perform decorrelation stretches (DCS) on the entire dataset in order to identify and discriminate compositional units; and (3) separate brightness temperature from surface emissivity for quantitative compositional analysis of the surface, reducing seam-line error in the emissivity mosaic. The approach presented here is valid for any ASTER-related study of large geographic regions where numerous images spanning different temporal and atmospheric conditions are encountered.     

Coherency Hub Design for Multisocket Sun Servers with CoolThreads Technology

CoHub, a coherency hub ASIC, provides a cost-effective way to extend a glueless two-node chip-multithreading system to a four-node system without changes to the processor. The four-node, 256-thread system achieves near-linear scaling of performance with thread count on transaction-processing workloads. Time-to-market pressure, 800-MHz operation, and a six-stage pipeline were among the constraints that shaped CoHub's design.     

An investigation of multiphase CFD modelling of a lateral sloshing tank

A near-resonant, sway-induced sloshing flow in a rectangular tank is used to compare a homogeneous and inhomogeneous multiphase approach for fluid density and viscosity in a commercial CFD code. Dimensional analysis of the relative motion between the phases suggests the application of an inhomogeneous multiphase model whereas previous published work has used the computationally cheaper homogeneous (or average property) approach. The comparison between the computational and experimental results shows that the homogeneous model tends to underestimate the experimental peak pressures by up to 50%. The inhomogeneous multiphase model gives good agreement with the experimental pressure data. Examination of the relative velocity at the fluid interface confirms that the inhomogeneous model is the appropriate model to use for the simulation of a violent sloshing flow.     

Image-based stained glass

We present a method of restyling an image so that it approximates the visual appearance of a work of stained glass. To this end, we develop a novel approach which involves image warping, segmentation, querying, and colorization along with texture synthesis. In our method, a given input image is first segmented. Each segment is subsequently transformed to match real segments of stained glass queried from a database of image exemplars. By using real sources of stained glass, our method produces high quality results in this nascent area of nonphotorealistic rendering. The generation of the stained glass requires only modest amounts of user interaction. This interaction is facilitated with a unique region-merging tool     

Low cycle fatigue,fatigue crack propagation and substructures in a series of polycrystalline Cu-Al alloys

Low Cycle Fatigue (LCF) on smooth hour glass specimens and Fatigue Crack Propagation (FCP) studies on Single Edge Notch (SEN) specimens were carried out at room temperature on four Cu-Al polycrystalline alloys to investigate the effects of Stacking Fault Energy (SFE) and mechanical property variations on fatigue characteristics. Significant improvements in fatigue properties were observed for alloys of low SFE. A microhardness technique was used to delineate the fatigue plastic zone ahead of stopped cracks at several stress intensity ranges for all the alloys. Planar slip was associated with a less than a second power dependence of plastic zone size on the stress intensity range. Transmission Electron Microscopy (TEM) was used to observe the substructures that developed both in LCF at different strain ranges and also ahead of fatigue cracks at different stress intensity ranges. Fractography was carried out to study the micromechanisms of crack propagation using a two stage replication technique. The experimental results were in good agreement with a theoretical model for FCP developed previously by the authors which incorporates mechanical and microstructural variables.     

Working memory capacity and the top-down control of visual search: Exploring the boundaries of "executive attention".

The executive attention theory of working memory capacity (WMC) proposes that measures of WMC broadly predict higher order cognitive abilities because they tap important and general attention capabilities (R. W. Engle & M. J. Kane, 2004). Previous research demonstrated WMC-related differences in attention tasks that required restraint of habitual responses or constraint of conscious focus. To further specify the executive attention construct, the present experiments sought boundary conditions of the WMC-attention relation. Three experiments correlated individual differences in WMC, as measured by complex span tasks, and executive control of visual search. In feature-absence search, conjunction search, and spatial configuration search, WMC was unrelated to search slopes, although they were large and reliably measured. Even in a search task designed to require the volitional movement of attention (J. M. Wolfe, G. A. Alvarez, & T. S. Horowitz, 2000), WMC was irrelevant to performance. Thus, WMC is not associated with all demanding or controlled attention processes, which poses problems for some general theories of WMC. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fecal Coliform Removal within a Marshland Upwelling System Consisting of Scatlake Soils

The marshland upwelling system (MUS) was installed on private camps in the Grand Bay National Estuarine Research Reserve, Moss Point, Mississippi. The system was evaluated for its effectiveness in removing fecal coliforms from settled, raw wastewater. A suite of studies was performed at flow rates of 1.9, 2.8, and 5.5 L/min and an injection frequency of 30 min every 3 h to investigate fecal coliform removal. An additional study was performed at a flow rate of 2.8 L/min and an injection frequency of 15 min every hour. Overall, the MUS consistently maintained fecal concentrations below effluent regulatory standards for shellfish harvesting waters (14 most probable number of colonies per 100 mL). Mean influent concentrations of 55,269±2,218,016 colony forming units (CFU)/100 mL were reduced to effluent counts of 2.7±14.07 CFU/100 mL (observed in the 1.5 m wells). Three- to four-log reductions in influent counts were observed over the initial 1.4 vector?m from the injection well. The overall removal followed a first-order decay relationship with respect to vector distance, resulting in removal rate constants ranging from 5.6 to 6.6/m and predicted surface concentrations approaching 0 CFU/100 mL. The 2.8 L/min for 30 min every 3 h treatment provided the best effluent quality.     

Velocity Distribution in the Roughness Layer of Rough-Bed Flows

Several models for the vertical distribution of the double-averaged (in time and in the plane parallel to the mean bed) longitudinal velocity in the flow region between roughness troughs and roughness tops are suggested. We found that the same model for velocity distribution may be applicable to a range of flow conditions and roughness types, which share some common features. The suggested models for velocity distribution in the near-bed region are: (1) Constant velocity; (2) exponential velocity distribution; and (3) linear velocity distribution. The measured velocity distributions may be approximated by a single model or by a combination of models depending on roughness geometry and flow conditions. The validity of these models for velocity distribution is supported by laboratory data.