Using the spectral asymmetry of TEA CO2 laser pulses to determine the Doppler-shift sign in coherent lidars with low frequency stability

We develop a method for determinating the relative positions of the lidar transmitter (LT) and the local oscillator (LO) frequencies in Doppler CO(2) lidars. It uses the weak spectral asymmetry of TEA CO(2) laser pulses, defined by a number of secondary peaks at the high-frequency side of the main spectrum peak. Depending on the sign of the beat frequency, these peaks may appear in the demodulated spectrum at either the high- or the low-frequency side. Each laser pulse spectrum is compared with reference spectra with two types of asymmetry, with the cross-correlation coefficients used as criteria. The performance of the method at different values of signal-to-noise ratio is analyzed numerically. The method is also applied to raw data from the lidar reference channel and demonstrates good performance at noise levels lower than the secondary peaks in the pulse spectrum or at a signal-to-noise ratio of >/=20 dB. Application of the pulse spectrum asymmetry for lidar frequency stabilization is analyzed. Lidar operation without frequency stabilization is considered as well. The method offers a simple Doppler lidar hardware for the creation of low-cost coherent lidars, velocimeters-rangefinders, etc.     

Ultimate InAsSbP solid solutions for 2.6–2.8-μm LEDs

Epitaxial layers of phosphorus-rich InAs_1? y ? x Sb _y P _x solid solutions were obtained by liquid phase epitaxy (LPE). The films with x=0.32 were grown at 575 °C on isoperiodic (100)InAs substrates. It is shown that the growth of InAsSbP layers from a phosphorus-rich liquid phase is accompanied by saturation of the phosphorus content in the solid state. InAsSbP-based diode heterostructures emitting in the 2.6–2.8 μ m wavelength range were obtained, the output emission power of which is sufficient for detecting both natural and industrial gases in the atmosphere.     

Control of Dynamics of Systems with Space and Time Integral Models

Problems of system dynamics control with an integral model in a bounded space and time domain are solved. The cases of control of distributed external dynamic disturbances and boundary conditions on internal and external domain contours are considered.     

High-efficiency 3.4–4.4 μm light-emitting diodes based on a p-AlGaAsSb/n-InGaAsSb/n-AlGaAsSb heterostructure operating at room temperature

Light-emitting diode structures operating at room temperature were obtained based on a p-AlGaAsSb/n-InGaAsSb/n-AlGaAsSb heterostructure with high Al content in the boundary layers formed on a p-GaSb(100) substrate. This structure ensures a threefold increase in the output radiant power and the external quantum yield (～1%) as compared to the known InAsSb/InAsSbP heterostructure grown on an InAs substrate. A considerable increase in the pulsed output radiant power is explained by a more effective confinement of nonequilibrium charge carriers in the active region and by a decrease in the nonradiative recombination level, which is achieved by creating an isoperiodic structure.     

Resistor rotators of bridged-and double-T type

The letter contains the theoretical and experimental results from the investigation of new rotator types Their advantages include an unlimited rotation angle, the possibility of choosing the negative impedance optimum value, high stability and a simple circuit solution.     

Design issues of a distance learning course on Business on the Internet

Abstract The paper presents the main design issues of a distance learning course on Business on the Internet. The instructional design is based on a learner-centred instructional strategy which allows learners to construct their own knowledge while solving real business problems and transferring their knowledge to other learners. They learn autonomously taking the responsibility for their learning and following their individual cognitive styles, interests, preferences. The learners have access to the Internet being members of a global, cooperative learning community. The learning community involves students and tutors who collectively take responsibility for the design and evaluation of the course content and the teaching methods to be applied. Both students and tutors inhabit a virtual learning environment that offers different virtual places and services: virtual university, virtual enterprise, auditoriums, workshop rooms, cafes, libraries, etc. where students from different locations can meet, interact, learn and work together, as if they were face-to-face.     

Influence of drawing and molecular weight on structural-mechanical properties of acrylic fibers

The influence of drawing and molecular weight in a narrow range on the several structural-mechanical properties of acrylic fibers have been investigated. Drawing of fibers (λ = 3x–6,5x) leads to a considerable increase of tenacity. These data were explained with the orientation and perfection of structure. It was found that the molecular weight in closer range influences the density, perfection of structure, and the stability of fibers to repetitive deformation. The results show that the diversions of the average molecular weight, in the manufacture of commercial acrylic fibers, must be negligible.