Pregnant women as a reservoir of undetected sexually transmitted diseases in rural South Africa: implications for disease control

OBJECTIVES: This study was undertaken to determine the prevalence of sexually transmitted diseases (STDs) in pregnant women in rural South Africa and to determine the value of using abnormal urogenital symptoms to identify infected women. METHODS: This was a cross-sectional study of 327 patients attending prenatal clinics. RESULTS: Of the 271 women with complete data, 141 (52%) had at least 1 STD and 49 (18%) had more than 1. Abnormal symptoms were common (n = 225; 83%), but associations were weak, and the positive predictive value of different symptoms for infection ranged from 2% to 54%. CONCLUSIONS: Most STDs in rural South African women remain undetected and untreated. As the scope for laboratory diagnosis in resource-poor settings is limited, presumptive treatment of pregnant women and their partners may be a cost-effective option to reduce transmission of STDs and HIV infection.     

Effect of Sediment pH on Resuspension of Kaolinite Sediments

The resuspension of contaminated cohesive sediments can impact water quality by mobilizing sediment particles and adsorbed contaminants. Changes in psysicochemical and electrochemical environments, around resuspended sediment particles, may cause some contaminants to desorb into the water column. The contribution of contaminated sediments to degradation of water quality depends on an estimate of sediment resuspension rates. In this study, the resuspension of Georgia kaolinite sediments under varying pH conditions was investigated in laboratory flume experiments. Because the edge charge of kaolinite particles is pH dependent, kaolinite particles exhibit different modes of particle associations under varying pH conditions. The paper characterizes these particle associations and relates them to the resuspension of kaolinite sediments for varying pH values. Variations in sediment water content, changes from a stratified to a uniform sediment bed, changes in rheological properties, and variations in the electrophoretic mobility of kaolinite particles were all indicative of the changes in particle associations that resulted from changes in sediment pH. The critical shear stress and the erosion rate coefficient were evaluated for varying pH values and explained by particle associations. A rheometer was used to measure rheological properties of the settled sediment bed; the measured yield stresses had a direct correlation with critical shear stresses.     

Suppression of boron penetration in p-channel MOSFETs usingpolycrystalline Si1-x-yGexCy gatelayers

Boron penetration through thin gate oxides in p-channel MOSFETs with heavily boron-doped gates causes undesirable positive threshold voltage shifts. P-channel MOSFETs with polycrystalline Si_1-x-yGe_xC_y gate layers at the gate-oxide interface show substantially reduced boron penetration and increased threshold voltage stability compared to devices with all poly Si gates or with poly Si_1-xGe gate layers. Boron accumulates in the poly Si_1-x-yGe_xC_y layers in the gate, with less boron entering the gate oxide and substrate. The boron in the poly Si_1-x-yGe_xC_y appears to be electrically active, providing similar device performance compared to the poly Si or poly Si_1-xGe_x gated devices     

Integrated amorphous and polycrystalline silicon thin-filmtransistors in a single silicon layer

Using a masked hydrogen plasma treatment to spatially control the crystallization of amorphous silicon to polycrystalline silicon in desired areas, amorphous and polycrystalline silicon thin-film transistors (TFTs) with good performance have been integrated in a single film of silicon without laser processing. Both transistors are top gate and shared all process steps. The polycrystalline silicon transistors have an electron mobility in the linear regime of ~15 cm²/Vs, the amorphous silicon transistors have a linear mobility of ~0.7 cm²/Vs and both have an ON/OFF current ratios of >10⁵. Rehydrogenation of amorphous silicon after the 600°C crystallization anneal using another hydrogen plasma is the critical process step for the amorphous silicon transistor performance. The rehydrogenation power, time, and reactor history are the crucial details that are discussed in this paper     

An energy evaluation of coupling nutrient removal from wastewater with algal biomass production

Recently, several life cycle analyses of algal biodiesel from virtual production facilities have outlined the potential environmental benefits and energetic balance of the process. There are a wide range of assumptions that have been utilized for these calculations, including the addition of fertilizers and carbon dioxide to achieve high algal yields in open ponds. This paper presents an energy balance of microalgal production in open ponds coupled with nutrient removal from wastewater. Actual microalgal yields and nutrient removal rates were obtained from four pilot-scale reactors (2500 gallons each) fed with wastewater effluent from a conventional activated sludge process for 6 months, and the data was used to estimate an energy balance for treating the total average 12 million gallons per day processed by the wastewater treatment plant. Since one of the most energy-intensive steps is the dewatering of algal cultures, several thickening and dewatering processes were compared. This analysis also includes the energy offset from removing nutrients with algal reactors rather than the biological nutrient removal processes typically utilized in municipal wastewater treatment. The results show that biofuel production is energetically favorable for open pond reactors utilizing wastewater as a nutrient source, even without an energy credit for nutrient removal. The energy content of algal biomass was also considered as an alternate to lipid extraction and biodiesel production. Direct combustion of algal biomass may be a more viable energy source than biofuel production, especially when the lipid content of dry biomass (10% in this field experiment) is lower than the high values reported in lab-scale reactors (50–60%).