Stress analysis of a cantilevered fixed partial denture with normal and reduced bone support

A two-dimensional finite element model was constructed to analyze the simulated mechanical behavior of a cantilevered fixed partial denture. The variations of the models were made by altering the degree of bone support, the number of splinted abutments, and the length of the pontics. High stress concentrations were observed around the connectors of the fixed prosthesis and the tooth closest to the cantilever. Reduced bone support increased the deflection and stress concentrations. There was reduction in displacement and stress concentration when the teeth were splinted together. To improve the prognosis of the fixed partial denture cantilever, the number of abutments should be increased and the number of pontics decreased.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

Cloning and sequencing of a tpr-met oncogene cDNA isolated from MNNG-transformed human XP fibroblasts

A rearranged tpr-met oncogene was identified in a MNNG-transformed human Xeroderma pigmentosum (XP) cell line (ASKMN). A 2016 bp cDNA was cloned and sequenced, disclosing an ORF with a coding capacity for a 523 aa protein. The sequence of this tpr-met cDNA was very similar to that previously reported in another human MNNG-transformed cell line (MNNG-HOS).     

Apoptosis as a cause of death in measles virus-infected cells

To determine the mechanism of measles virus-induced cell death, we studied the infection of Vero cells and monocytic cell lines with wild-type (Chicago-1) and vaccine (Edmonston) strains of measles virus. DNA fragmentation indicative of apoptosis was apparent by flow cytometry, agarose gel electrophoresis, and electron microscopy. Within syncytia, DNA strand breaks were demonstrated by end labeling with terminal transferase and then by visualization.     

人工智能方法用于熔喷过程在线检测的研究

熔喷生产最终产品质量的控制，对于过程优化具有重要的意义。产品质量的在线检测是过程监测与质量控制必不可少的。本文首次在熔喷系统中引入人工智能的研究方法，对熔喷非织造布的厚度与纤维直径进行在线预测。实测数据与人工神经网络的预测结果吻合较好，从而证实了人工神经网络用于模拟熔喷过程的可行性。网络的输入包括：挤出机温度、喷头温度、熔融体挤出速率、空气流率及接收距离。神经元计算的输出是纤维直径与熔喷非织布的厚度。文中进一步提出了将神经网络与专家系统相结合的研究路线，以实现熔喷过程的优化控制。     

Einfluß der Korngröße auf mechanische Eigenschaften und den ungeschmierten reversierenden Gleitverschleiß von Al2O3-Keramik

Influence of grain size on mechanical properties and dry oscillating sliding wear of Al₂O₃-ceramics Specimens with average grain sizes varying between about 0.8 μm and 12 μm were produced by cold isostatic pressing of high purity Al₂O₃-powder followed by sintering between 1300°C and 1700°C. Hardness, Young's modulus, bending strength and fracture toughness were measured as a function of average grain sizes. Tribological tests were carried out on the different microstructures at normal laboratory air and room temperature by using a ring-on-block tribometer. Experimental results showed the dependence of mechanical properties on grain size, hardness and bending strength obeying a Hall-Petch type relation, approximately. Coefficient of friction was relatively independent of grain size under the test conditions used. However, wear intensity increased substantially if a critical grain size was surpassed. This was due to a change in mechanisms of material removal which was confirmed by scanning electron microscopical studies of the worn surfaces.