Harmonic filter design using actual recorded data

This work presents a study of a harmonic filter design that minimizes harmonic distortion caused by harmonic sources such as drives. Several types of shunt harmonic filters are presented. The analysis includes the basic principles, the application of the Z-bus method and the economic aspects affecting the harmonic filter design. Offline steady state simulation programs, namely, V-HARM and HARMFLO, are used to model loads, to study variation of the harmonics, and to evaluate the effect of harmonic filters at various buses in the system. Several existing utility systems are used as test cases to check the performance of the filter. The major objectives in this study are (i) to improve the power factor, (ii) to reduce current and voltage distortion to standard limits, and (iii) to reduce resonance problems at other buses, if any. The transient analysis of harmonic filters using the Electromagnetic Transients Program (EMTP), which is essential to determine proper ratings of the filter components, is also reported     

Control of polishing of diamond films using microactuation and an atmospheric pressure plasma

In this work, the diamond deposited by hot filament chemical vapor deposition (CVD) is polished using an atmospheric pressure plasma. In order to position the film relative to the plasma, a microactuator system is designed using a stack of domed piezoelectric actuators. A dynamic model based on the physical system is developed and the model parameters are measured experimentally. A system based on laser triangulation is used to measure the position of the diamond film relative to the plasma. Control techniques are used to reduce the oscillations during actuation and to eliminate the steady state positioning error. With the application of feedback control, the overshoot is reduced to 2% and the settling time is reduced to 0.3 s. A preliminary set of experiments is performed to relate process parameters to the final surface roughness of the diamond film. The parameters studied include the film's time of exposure to the plasma, the height of the film relative to the plasma, and the distance from the film to the center of the plasma. It is found that the optimum exposure time is 15 min and the reduction of surface roughness is greatest when the distance between the film and the plasma is at a minimum. The best results are obtained when the top of the film is even in elevation with the tip of the top electrode. The diamond film is translated laterally along the plasma. When feedback control is not used, there is no change in the surface roughness. With feedback control implemented, the surface roughness of the diamond film is reduced by 33%.     

The carboxyl terminus of interferon-gamma contains a functional polybasic nuclear localization sequence

Cytokines such as interferon-gamma (IFN-gamma), which utilize the well studied JAK/STAT pathway for nuclear signal transduction, are themselves translocated to the nucleus. The exact mechanism for the nuclear import of IFN-gamma or the functional role of the nuclear translocation of ligand in signal transduction is unknown. We show in this study that nuclear localization of IFN-gamma is driven by a simple polybasic nuclear localization sequence (NLS) in its COOH terminus, as verified by its ability to specify nuclear import of a heterologous protein allophycocyanin (APC) in standard import assays in digitonin-permeabilized cells. Similar to other nuclear import signals, we show that a peptide representing amino acids 95-132 of IFN-gamma (IFN-gamma(95-132)) containing the polybasic sequence 126RKRKRSR132 was capable of specifying nuclear uptake of the autofluorescent protein, APC, in an energy-dependent fashion that required both ATP and GTP. Nuclear import was abolished when the above polybasic sequence was deleted. Moreover, deletions immediately NH2-terminal of this sequence did not affect the nuclear import. Thus, the sequence 126RKRKRSR132 is necessary and sufficient for nuclear localization. Furthermore, nuclear import was strongly blocked by competition with the cognate peptide IFN-gamma(95-132) but not the peptide IFN-gamma(95-125), which is deleted in the polybasic sequence, further confirming that the NLS properties were contained in this sequence. A peptide containing the prototypical polybasic NLS sequence of the SV40 large T-antigen was also able to inhibit the nuclear import mediated by IFN-gamma(95-132). This observation suggests that the NLS in IFN-gamma may function through the components of the Ran/importin pathway utilized by the SV40 T-NLS. Finally, we show that intact IFN-gamma, when coupled to APC, was also able to mediate its nuclear import. Again, nuclear import was blocked by the peptide IFN-gamma(95-132) and the SV40 T-NLS peptide, suggesting that intact IFN-gamma was also transported into the nucleus through the Ran/importin pathway. Previous studies have suggested a direct intracellular role for IFN-gamma in the induction of its biological activities. Based on our data in this study, we suggest that a key intracellular site of interaction of IFN-gamma is the one with the nuclear transport mechanism that occurs via the NLS in the COOH terminus of IFN-gamma.     

Model-based test generation using extended symbolic grammars

A novel, model-based test case generation approach for validating reactive systems, especially those supporting richly structured data inputs and/or interactions, is presented. Given an executable system model and an extended symbolic grammar specifying plausible system inputs, the approach performs a model-based simulation to (i) ensure the consistency of the model with respect to the specified inputs, and (ii) generate corresponding test cases for validating the system. The model-based simulation produces a state transition diagram (STD) automatically justifying the model runtime behaviors within the test case coverage. The STD can further be transformed to produce an evolved symbolic grammar, which can then be used to incrementally generate a refined set of test cases. As a case study, we present a live sequence chart (LSC) model-based test generator, named LCT in short, for LSC simulation and consistency testing. The evolved symbolic grammar produced by the simulator can either be used to generate practical test cases for software testing, or be further refined by applying our model-based test generation approach again with additional test coverage criteria. We further show that LSCs can also be used to specify and test certain temporal system properties during the model simulation. Their satisfaction, reflected in the STD, can either be served as a directive for selective test generation, or a basis for further temporal property model checking.     

Wavelength Conversion Placement in WDM Mesh Optical Networks*

Wavelength conversion helps improve the performance of wavelength division multiplexed (WDM) optical networks that employ wavelength routing. In this paper, we address the problem of optimally placing a limited number of wavelength converters in mesh topologies. Two objective functions, namely, minimizing the average blocking probability and minimizing the maximum blocking probability over all routes, are considered. In the first part of the paper, we extend an earlier analytical model to compute the blocking probability on an arbitrary route in a mesh topology, given the traffic and locations of converters. We then propose heuristic algorithms to place wavelength converters, and evaluate the performance of the proposed heuristics using the analytical model. Results suggest that simple heuristics are sufficient to give near-optimal performance.     

High slew-rate CMOS operational amplifier

A 0.8 /spl mu/m CMOS operational amplifier configuration with a slew rate in excess of 2 V/ns and a unity gain bandwidth of 55 MHz with a load capacitance of 15 pF is proposed. This employs a dynamic technique that turns on a large current source when the rate of change of input is larger than a pre-decided value.     

Analytical solution of amperometric enzymatic reactions based on Homotopy perturbation method

Electrochemical polymerization is a simple and direct technique often employed for immobilizing redox enzymes at an electrode surface. Besides these, it allows precise control over the amount, spatial distribution and orientation of the enzymes. Analytical expressions pertaining to the immobilization of enzyme by electrochemical polymerization on the electrode surface were obtained by Homotopy perturbation method (HPM). This expression further distinguishes the product of the enzyme reaction at the electrode surface from those occurring alongside the polymer employed for immobilization. These analytical results are compared with the available limiting case results and they are found to be in good agreement.     

ASE spectral slice gain-clamping of EDFA

An erbium-doped (Er-doped) fiber amplifier operating in the C-band is gain clamped, at about 26 dB with noise figures below 6 dB by multiple fiber Bragg gratings. These gratings are placed at the amplifier output with center wavelengths in between communication channels so that unwanted amplified spontaneous emission is removed but put to good use. A 0.5-dB gain compression point at -15 dBm of input signal powers for two simultaneous signal channels is also demonstrated.     

Highly basic CaO nanoparticles in mesoporous carbon materials and their excellent catalytic activity

Highly basic CaO nanoparticles immobilized mesoporous carbon materials (CaO-CMK-3) with different pore diameters have been successfully prepared by using wet-impregnation method. The prepared materials were subjected to extensive characterization studies using sophisticated techniques such as XRD, nitrogen adsorption, HRSEM-EDX, HRTEM and temperature programmed desorption of CO2 (TPD of CO2). The physico-chemical characterization results revealed that these materials possess highly dispersed CaO nanoparticles, excellent nanopores with well-ordered structure, high specific surface area, large specific pore volume, pore diameter and very high basicity. We have also demonstrated that the basicity of the CaO-CMK-3 samples can be controlled by simply varying the amount of CaO loading and pore diameter of the carbon support. The basic catalytic performance of the samples was investigated in the base-catalyzed transesterification of ethylacetoacetate by aryl, aliphatic and cyclic primary alcohols. CMK-3 catalyst with higher CaO loading and larger pore diameter was found to be highly active with higher conversion within a very short reaction time. The activity of 30% CaO-CMK3-150 catalyst for transesterification of ethylacetoacetate using different alcohols increases in the following order: octanol > butanol > cyclohexanol > benzyl alcohol > furfuryl alcohol.     

Improving process models by discovering decision points

Workflow management systems (WfMS) are widely used by business enterprises as tools for administrating, automating and scheduling the business process activities with the available resources. Since the control flow specifications of workflows are manually designed, they entail assumptions and errors, leading to inaccurate workflow models. Decision points, the XOR nodes in a workflow graph model, determine the path chosen toward completion of any process invocation. In this work, we show that positioning the decision points at their earliest points can improve process efficiency by decreasing their uncertainties and identifying redundant activities. We present novel techniques to discover the earliest positions by analyzing workflow logs and to transform the model graph. The experimental results show that the transformed model is more efficient with respect to its average execution time and uncertainty, when compared to the original model.