Medium-chain-length poly-3-hydroxyalkanoates-carbon nanotubes composite as proton exchange membrane in microbial fuel cell

Medium-chain-length poly-3-hydroxyalkanoates (PHA) and carboxyl group-functionalized multiwalled carbon nanotubes (MC) were used to fabricate a composite membrane for application in a double-chambered microbial fuel cell (MFC). MC was composited into PHA at 5%, 10%, and 20% w/w via ultrasound dispersion blending method. PHA-MC composite was compared with Nafion 117 as proton exchange membrane in MFC operated with palm oil mill effluent (POME) wastewater. The composite exhibited prerequisite separator membrane characteristics. The dispersion of MC in the polymer matrix increased its interfacial surface area and water uptake properties. PHA-MC10% membrane in MFC showed maximum power density of 361?mW/m², which was comparable with Nafion 117 (372?mW/m²). Internal resistance decrease, chemical oxygen demand (COD) removal, coulombic efficiency (CE), and conductivity of the PHA-MC10% were superior to Nafion 117. The environmental-friendly material could provide an alternative towards realizing practical MFC application.     

Highly selective homogeneous ethylene epoxidation in gas (ethylene)‐expanded liquid: Transport and kinetic studies

Recently a homogeneous liquid‐phase ethylene oxide (EO) process with nearly total EO selectivity, catalyzed by methyltrioxorhenium with H₂O₂ as an oxidant, was reported. Fundamental mass transfer and kinetic studies of this reaction are reported in the present work. Volumetric expansion studies revealed that the liquid reaction phase (methanol + H₂O₂/H₂O) is expanded by up to 12% by compressed ethylene in the 20–40^°C range and up to 50 bars. This represents an increase in ethylene solubility by approximately one‐order of magnitude, attributed to the unique exploitation of near‐critical ethylene (P_c = 50.76 bar; T_c = 9.5^°C). Interphase mass‐transfer coefficients for ethylene dissolution into the liquid phase were obtained experimentally. Operating at conditions that enhanced the ethylene solubility and eliminated interphase mass‐transfer limitations maximized the EO productivity (1.61–4.97 g EO/h/g cat), rendering it comparable to the conventional process. Intrinsic kinetic parameters, estimated from fixed‐time semibatch reactor studies, disclosed the moderate activation energy (57 ± 2 kJ/mol). © 2012 American Institute of Chemical Engineers AIChE J, 59: 180–187, 2013     

Thermal and flow properties of oils from salmon heads

Thermal and flow properties of unrefined oils from the heads of red or pink salmon were evaluated. Major thermal degradation of the salmon oils occurred between 200 and 450°C. Red and pink salmon oils were completely decomposed at 533 and 668°C, respectively. The phase transition of salmon oils occurred over a wide range of temperatures. The melting points of −69.6 to −0.36°C and −64.7 to 20.8°C were observed for red and pink salmon oils, respectively. The enthalpy was 40 j/g for red salmon oil and 39 j/g for pink salmon oil. Specific heat capacity ranges of 0.8 to 1.6 and 1.3 to 2.3 j/g/°C were observed for red and pink salmon oils, respectively. Both salmon oils exhibited Newtonian flow behavior. Red salmon oil required higher magnitudes of energy (kj·mol⁻¹) to flow than pink salmon oil. The viscosity of salmon oils was temperature-dependent and could be predicted by the Arrhenius equation.     

Conventional Study on Novel Dicationic Ionic Liquid Inclusion with β-Cyclodextrin

This study focuses on the synthesis and characterization of the inclusion complex of β-Cyclodextrin (β-CD) with dicationic ionic liquid, 3,3'-(1,4-Phenylenebis [methylene]) bis(1-methyl-1H-imidazol-3-ium) di(bromide) (PhenmimBr). The inclusion complex was prepared at room temperature utilizing conventional kneading technique. Proton ((1)H) NMR and 2D ((1)H-(1)H) COSY NMR were the primary characterization tools employed to verify the formation of the inclusion complex. COSY spectra showed strong correlations between protons of imidazolium and protons of β-CD which indicates that the imidazolium ring of PhenmimBr has entered the cavity of β-CD. UV absorption indicated that β-CD reacts with PhenmimBr to form a 2:1 β-CD-PhenmimBr complex with an apparent formation constant of 2.61 × 10(5) mol&(-2) L(2). Other characterization studies such as UV, FT-IR, XRD, TGA, DSC and SEM studies were also used to further support the formation of the β-CD-PhenmimBr inclusion complex.     

Kinetics of Lipid Oxidation and Degradation of Flaxseed Oil Containing Crawfish (<Emphasis Type="Italic">Procambarus clarkii</Emphasis>) Astaxanthin

Flaxseed oil (FO) containing crawfish (Procambarus clarkii) astaxanthin (FOA) was evaluated for lipid oxidation and astaxanthin degradation. The FOA was analyzed for astaxanthin content, free fatty acids (FFA), peroxide value (PV), fatty acid methyl esters (FAMEs) profile, and color. The amount of extractable astaxanthin in the crawfish byproducts was 3.02 mg/100 g of crawfish byproducts. FOA and FO had a similar alpha-linolenic acid (ALA) content (on a weight% basis). The FO was lighter and more yellow in color than FOA. The oxidation rate of FOA was lower than that of FO. When FO and FOA were heated to 30 °C, both oils exhibited minimal lipid oxidation with increasing heating time, whereas FO, when heated to 40, 50, 60 °C, had a higher lipid oxidation rate than FOA with increasing the heating time from 0 to 4 h. Astaxanthin was an effective antioxidant agent in FO when it was heated from 30 to 60 °C. The degradation of astaxanthin in FOA could be described by first order reaction kinetics. Astaxanthin was stable in flaxseed oil at 30 and 40 °C, while its stability decreased significantly at 50 and 60 °C. The rate of astaxanthin degradation in FOA was significantly influenced by temperature.     

Role of choline formate ionic liquid in the polymerization of vinyl and methacrylic monomers

Polymerizations of vinyl and methacrylate monomers (2‐hydroxyethyl methacrylate, styrene, and methyl methacrylate) were carried out in a choline formate ionic liquid at room temperature without the addition of peroxide‐based initiators. Choline formate acted as both an initiator and a solvent and produced high‐molecular‐weight polymers. Gel permeation chromatography and electron paramagnetic resonance measurements indicated that the polymerizations predominantly occurred by a free‐radical mechanism. This method of polymerization provides an alternate route to eliminate the use of toxic initiators and solvents. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

An index to characterize gas-solid and solid-solid mixing from average volume fraction fields

A mixing index based on solid volume fraction fields is developed for gas-solid flows. Conventional mixing indices are based on particle realizations of granular mixing and are applicable to experimental data or discrete element method simulations. However, these indices cannot be used as-is for multifluid models, and an index for characterizing mixing in gas-solid flows from continuous fields is needed. The performance of the new mixing index is tested in two applications. The first is a 3D simulation of the mixing of biomass and sand in a fluidized bed reactor, and the second is a 2D simulation of binary particle segregation in a fluidized bed. The simulations are performed using OpenFOAM®. The mixing index is used to quantify gas-solid mixing using solid volume fractions and solid-solid mixing using solid fractions. The formulation of conventional mixing indices is extended to be used with solid volume fractions fields, and methods for performance improvement are presented.     

On the assessment of muscle fatigue rate via various EMG frequency spectral parameters

A research study was undertaken to investigate the fatigue process of quadriceps muscle during sustained isometric contraction at several work load levels using root-mean-squared (RMS) voltage and frequency parameters of EMG frequency spectral distribution. Its objective was to evaluate the possibility of using those parameters to indicate muscle fatigue rate. Twelve male subjects participated in an experiment which required them to exert and maintain isometric knee extension forces at 25%, 40%, 55%, and 70% of their maximal voluntary contraction (MVC) force levels. The results showed that both initial mean power frequency (MPF) and median power frequency (MF) (as determined from MPF and MF versus time curves) were not significantly influenced by muscle contraction level (p > 0.1). RMS voltage, MPF, and MF linear slopes, on the other hand, were significantly correlated to muscle contraction level (p < 0.001) which suggested that they could be used to represent muscle fatigue rate. The exponential relationship found in this study showed that quadriceps fatigued at an increasing rate as the work load increased. Further, an improvement in the coefficient of correlation between their linear slopes and muscle work load was found when expressing muscle work load in terms of the ratio of force to body weight. This finding indicated the possibility of using body weight as a basis of determining work load level which could help to improve the quality of quantitative assessment of muscle fatigue.     

Virtual realia: maneuverable computer 3D models and their use in learning assembly skills

Two experiments compared real and virtual models as aids for learning assembly skills. In Experiment 1, ten participants individually studied either a fully assembled model, or a computer-generated one, in exploded view, that could be spatially manipulated in any direction. Participants then assembled the object in front of a video camera. ANOVA indicated virtual model are studied significantly longer but yield faster assembly than a real model. Experiment 2 used the same treatments plus a fully assembled virtual mode, randomly assigned to 28 participants who studied the aid, assembled the model, and then repeated the task from memory 3 days later. ANOVA indicated no differences between the three groups in assembly speed or accuracy. However, participants studied the exploded virtual model significantly longer than the two intact views of the model suggesting the former may impose a greater cognitive load due to the additional visual information it provides.