Slip transfer and dislocation nucleation processes in multiphase ordered Ni-Fe-Al alloys

Directionally solidified (DS) alloys with the nominal composition Ni-30 at. pct Fe-20 at. pct Al having eutectic microstructures were used to study slip transfer across interphase boundaries and dislocation nucleation at the interfacial steps. The slip transfer from the ductile second phase, γ(fcc) containing ordered γ′(L1₂) precipitates, to the ordered β(B2) phase and the generation of dislocations at the interface steps were interpreted using the mechanisms proposed for similar processes involving grain boundaries in polycrystalline single-phase materials. The criteria for predicting the slip systems activated as a result of slip transfer across grain boundaries were found to be applicable for interphase boundaries in the multiphase ordered Ni-Fe-Al alloys. The potential of tailoring the microstructures and interfaces to promote slip transfer and thereby enhance the intrinsic ductility of dislocation-density-limited intermetallic alloys is discussed.     

Preoperative sonographic diagnosis of acute appendicitis caused by Ascaris lumbricoides

Acute appendicitis caused by Ascaris lumbricoides is an uncommon variant of a common disease. We describe a case in which sonography was used for preoperative diagnosis of ascaris appendicitis.     

Effects of Solvents, Temperature, and Plasticizer on Film Coating of Tablets

The effects of solvent composition, temperature, solvent retention, plasticizers, and polishing on the disintegration and percent dissolution of various nonaqueous film coated tablets were studied. A mixture of isopropanol-dichloromethane used as solvent systems for the film coating of ranitidine hydrochloride tablets resulted in reduced film peel-off time, decreased disintegration time, and increased percent dissolution. The effect of prewarming the coating bed of cimetidine tablets revealed an increase in percent dissolution compared to no prewarming condition. In contrast, an increase in temperature of the tablet bed resulted in higher disintegration time and lower percent dissolution of ibuprofen tablets. Ranitidine hydrochloride film coated tablets polished with polyethylene glycol showed lower disintegration time and higher percent dissolution than those polished with beeswax. The presence of plasticizer in the coating solution resulted in decreased disintegration time and higher percent dissolution for norfloxacin tablets.     

Studies on haemoglobin from the Indian toad, Bufo melanostictus, by electron microscopy

Hæmoglobin from an amphibian, Bufo melanostictus, was studied by electron microscopy after metal shadowing and after negative staining with uranyl acetate. The effect of the electron stain on the protein was investigated by spectrophotometry. The sample was also characterized by alkali denaturation and sedimentation analysis. The results were compared to those of adult human hæmoglobin. Spectrophotometry of the sample showed characteristics similar to those of normal oxyhæmoglobin. The protein, like human adult hæmoglobin, was found to be completely alkali-labile. Ultracentrifugation of a freshly prepared sample showed a single symmetrical peak, an indication for the presence of a homogeneous component. The S⁰_20,W value (5.1) was found to be markedly higher than that of adult human hæmoglobin. With storage, however, the peak became asymmetrical suggesting the formation of a limited amount of a heavier component. The electron micrographs of the shadowed preparations revealed a characteristic shape and ultrastructure of the protein molecules and their average height was found to be 5.5 nm. The micrographs of the negatively stained samples showed many particles with a substructure similar to that of the shadowed molecules and a mean dimension of 6.1 nm, a number of dimers of average length 6.0 nm and overall width 3.6 nm, and many globules of average diameter 3.6 nm. These were interpreted as whole, half and quarter hæmoglobin molecules, respectively. Both techniques revealed at the most four subunits in a molecule. The structure of the subunits and their arrangement in the molecule were found to be essentially similar to those of normal human adult hæmoglobin, and could be interpreted in terms of the Perutz model. Spectrophotometry of the mixture of the protein and uranyl acetate showed that the protein becomes denatured with time and that the denaturation is due to the low pH (4.3) of the stain. Nevertheless, this study showed that by keeping the staining time very short, it is possible to obtain acceptable electron micrographs of small multi-unit protein molecules such as haemoglobin.     

Flow in the Ekman layer on an oscillating porous plate

Summary.  The Laplace transform technique is utilized to obtain the exact solution for thermally-induced wave propagation in a circular piezoelectric plate. The temperature is assumed to satisfy the one-dimensional heat conduction equation that includes a relaxation time. Displacement and electric potential functions are introduced in order to solve the equations of motion and electrodynamics. Numerical results obtained for both a PZT-5A plate and a non-piezoelectric plate illustrate the effects of relaxation time and piezoelasticity on displacement and stress histories. Received October 3, 2002 Published online: February 10, 2003     

Reliability evaluation of flow networks considering multistate modelling of network elements

This paper presents a simple method for evaluating the reliability of a multistate flow network. A system is considered reliable only if it successfully transmits at least the required system capacity from the transmitter to the receiver station. All successful states are obtained from the knowledge of the max-flow min-cuts of the system graph. Examples are solved to demonstrate the applicability of proposed method. It is observed that the method is simple, computationally fast and efficient.     

Surface microstructural modification and fracture behavior of tensile deformed polypropylene with different percentage crystallinity

Microstructural evolution during tensile deformation of injection molded polypropylene (PP) at the micro- and nano-scale level was studied using atomic force and scanning electron microscopy techniques. Atomic force microscopy (AFM) enabled microstructural changes of tensile deformed PPs with different percentage crystallinity to be captured. AFM of undeformed slow-cooled (SC-PP: high crystallinity) and water-quenched (WQ-PP: low crystallinity) PPs suggested that the fibrils are relatively more closely packed in the SC-PP with higher average surface height of 7.5 nm as compared to 5.4 nm in the case of WQ-PP. Tensile deformed SC-PP and WQ-PP at displacement rates of 125–500 mm/min (strain rates of 0.04 s⁻¹ to 0.16 s⁻¹) indicated that the fibrils/microfibrils are aligned along the tensile axis, with WQ-PP exhibiting enhanced stretching of fibrils/microfibrils/chain-folded lamellae in comparison to SC-PP. Three fracture morphologies were identified at different strain rates, and include crazing/tearing (C), brittle fracture in association with crazing/tearing (B1), and brittle fracture together with ductile pulling of ligaments (B2). The fracture morphology exhibited by both SC-PP and WQ-PP was similar, but the percent area fraction of the three identified morphologies varied. WQ-PP with lower crystallinity was characterized by a decrease in percent of crazing/tearing (C) and brittle+crazing/tearing (B1), and increase in brittle+ductile pulling of ligaments (B2). The fracture characteristics of PPs with differences in crystallinity was consistent with AFM observations.     

Thermoreversible gelation of poly[hexyl isocyanate]: Effect of solvent type

The thermoreversible gelation of poly[hexyl isocyanate] (PHIC), a rather stiff polymer, has been studied in two closely-related solvents of the alcane series, namely heptane and octane. Temperature-concentrations phase diagrams have been established for both systems. The occurrence of polymer-solvent compound is suggested in heptane but not in octane. This conclusion receives further support from neutron diffraction investigations through the use of the isotopic labelling technique. Finally, it is observed that the morphology is also affected by the solvent type although still displaying a fibrillar network structure.