Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550-650°C temperature range. The M-G parameters,m, m’,C, andC’ were proposed and discussed for the two alloy systems. Them value of the M-G relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. Them’, value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. Them’ of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameterm’ was closer to unity than that of the M-G relation.     

Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

Solution of a multidimensional inverse radiation problem by means of mode reduction

The Karhunen–Loève Galerkin procedure is employed to solve an inverse radiation problem of determining the time‐varying strength of a heat source, which mimics flames in a furnace, from temperature measurements in three‐dimensional participating media where radiation and conduction occur simultaneously. The inverse radiation problem is solved through the minimization of a performance function, which is expressed by the sum of square residuals between calculated and observed temperature, using a conjugate gradient method. Through the Karhunen–Loève Galerkin procedure, one can represent the system dynamics with a minimum degree of freedom, and consequently the amount of computation required in the solution of the inverse problem is reduced drastically when the present technique is adopted. Copyright © 2004 John Wiley & Sons, Ltd.     

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

ZnO thin film was deposited on various metal electrodes by reactive sputtering, and c-axis preferred orientation of the film has been studied. ZnO, which has high piezoelectricity, is promising for oscillators or filter devices such as surface acoustic wave (SAW) device, gas sensor, and film bulk acoustic resonator (FBAR). But, for the application of ZnO film for these devices, the film should be grown with c-axis normal to the electrode. In this study, Pt, Al, and Au were deposited on Si wafer, and the surface roughness and crystal structure of the ZnO film on the electrode were investigated using AFM, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Columnar structures of ZnO films were grown with c-axis normal to all electrodes, and among them Pt electrode showed the highest preferred orientation of ZnO film.     

The Region 1 & 3 Broadcasting‐Satellite Service Plan after WRC‐03

The 1977 Broadcasting‐Satellite Service (BSS) Plan for Region 1 & 3 had been widely acknowledged to be out‐of‐date by the late 1980s. Development of digital modulation in the early 1990s provided an opportunity to update the technical provisions of the Plan to make it more economically viable. After a decade of work and three World Radiocommunication Conferences (WRCs), the revision of Region 1 & 3 BSS Plan was finally completed in 2003. The new Plan increased channel assignments from 5 to 10 analog‐equivalent channels for each country in Region 1, and from 4 to 12 channels for each country in Region 3. Yet, despite the increase in capacity, the new Plan is surprisingly similar to the original one in terms of the technical parameters. It is still based on national coverage, and the channel plan, orbital location, orbital spacing, and polarization are also the same. As a result, the new Plan is no more economically viable to implement than the old. To create economically viable BSS systems would most likely require modifications to the assignment in the Plan. Yet, modification procedures were made more difficult to apply after replanning. Less future implementation of BSS networks than would otherwise have occurred can be expected, and an inefficient usage of these frequency bands will likely result. On the other hand, less implemented systems will mean more capacity set aside for future use. This is important for countries that currently do not have satellite operations. In the end, BSS replanning reflects the eternal conflict between efficient usage and guaranteed future access. Copyright © 2005 John Wiley & Sons, Ltd.     

3D optical interconnects for high-speed interchip and interboardcommunications

Metal-based communications between subsystems and chips has become the limiting factor in high-speed computing. Maturing optics-based technologies offer advantages that may unplug this bottleneck. Optical interconnects offer high-speed computers key advantages over metal interconnects. These include (1) high spatial and temporal bandwidths, (2) high-speed transmission, (3) low crosstalk independent of data rates, and (4) high interconnect densities. Although faster device switching speeds will eventually be necessary for future massively parallel computing systems, the deciding factor in determining system performance and cost will be subsystem communications rather than device speed. Free-space optical interconnects, by virtue of their inherent parallelism, high data bandwidth, small size and power requirement, and relative freedom from mutual interference of signals, already show great promise in replacing metal interconnects to solve communication problems     

Maternal age and congenital cytomegalovirus infection: screening of two diverse newborn populations, 1980-1990

Cytomegalovirus (CMV) is the leading cause of congenital viral infection in the United States. To prevent damaging congenital CMV infections, it is necessary to have accurate population estimates of prevalence and to identify maternal factors associated with an elevated risk of congenital infection in the newborn. From 1980 through 1990, 17,163 offspring of predominantly low-income nonwhite women who delivered at a public hospital and 9892 newborns of predominantly mid- to upper-income white women who delivered at a private hospital were screened for congenital CMV infection. Women < 20 years old (adjusted prevalence odds ratio [POR], 4.8; 95% confidence interval [CI], 2.6-8.9) at the public hospital and all nonwhite women (adjusted POR, 1.6; 95% CI, 1.1-2.2) had an increased risk of delivering an infected newborn. Newborns of adolescent women in both populations had the highest prevalence of clinically apparent infection. Offspring of nonwhite low-income adolescents are at greatest risk for congenital CMV infection and more damaging sequelae.     

Matrix unit cell scheduler (MUCS) for input-buffered ATM switches

This paper presents a novel matrix unit cell scheduler (MUCS) for input-buffered asynchronous transfer mode (ATM) switches. The MUCS concept originates from a heuristic strategy that leads to an optimal solution for cell scheduling. Numerical analysis indicates that input-buffered ATM switches scheduled by MUCS can utilize nearly 100% of the available link bandwidth. A transistor-level MUCS circuit has been designed and verified using HSPICE. The circuit features a regular structure, minimal interconnects, and a low transistor count. HSPICE simulation indicates that using 2-μm CMOS technology, the MUCS circuit can operate at clock frequency of 100 MHz     

Predicting compliance with annual follow-up evaluations in persons with spinal cord injury

In this study a representative sample of German acute care hospitals is used to describe the effects of dementia within acute care hospitals. Data from hospital patients above age 60 with the diagnosis dementia (ICD 290, 293, 294 and 310), collected over an observation period of 12 years, are compared with nondemented hospital patients at the same ages. The differences in the average length of stay between demented and nondemented patients are only relatively small in German acute care hospitals. The degree of multimorbidity is higher and hospital infections are more frequent for demented patients. The main differences occur with mortality: demented inpatients of both sexes experience a hospital mortality which is about twice as high as for nondemented patients at the same ages.