New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

A linear minimum mean square error multiuser receiver inRayleigh-fading channels

We generalize the multiuser (CDMA spread spectrum) communication systems to the fading environments. We first extend Verdu's (1986) conventional optimum receiver to Rayleigh-fading environments and then evaluate its performance. Having no knowledge of the received power at the receiving end, we therefore need an estimator to efficiently estimate the received signal strength of each user in fading environments. A linear minimum mean square error (LMMSE) unbiased estimator is proposed to attain this goal. By using the minimum mean square error (MMSE) Bayesian estimation, we further propose the LMMSE bit estimator for efficient demodulation. Its performance is close to the optimum multiuser receiver but with a much simpler polynomial complexity. To further reduce the complexity, we extend the LMMSE estimator to the sequential LMMSE estimator. In sequential estimation, we do not need to implement the matched filter banks and to perform the matrix inversion when estimating. In addition, it converges after approximately 2k iterations, where k is the number of users. With this fast convergence property and the simple structure, the sequential LMMSE estimator provides an attractive alternative to the implementation of a multiuser system     

Hydrodynamic characteristics of a FCC regenerator

The hydrodynamic and gas mixing characteristics have been determined in a FCC regenerator (0.48 m I.D.x3.4 m high) with FCC particles. Solids holdup in the dense bed decreases with increasing gas velocity, but it increases in the freeboard region. The bubble/void fraction increases with an increase along the bed height at a given gas velocity and increases with increasing gas velocity at a constant bed height. Backmixed tracer gas at the wall region is higher than that at the center region of the bed. The gas backmixing coefficient decreases with increasing gas velocity.     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

Numerical and experimental investigation of three-dimensional flow in extrusion dies

The univariant element, Q₁ P₀, and the multivariant elements, QP₀ and R P₀, are compared for the numerical simulation of the flow in extrusion dies. The pressure distribution obtained by using the Q₁ P₀ element was found to be afflicted with the checkerboard pressure mode. On the other hand, the multivariant elements, Q P₀ and R P₀, gave accurate and physically reasonable velocity and pressure distributions. The computed values of the pressure drop across extrusion dies matched well with the pressure drop determined experimentally.     

The participation of block copolymers in the increase in the number of tie molecules

Three-block copolymers polyamide-block-polyX-block-polyamide (where X is styrene, ethylene-co-1-butene, and others) are able to improve substantially the toughness of poly(ϵ-caprolactam). Outer blocks of these copolymers are able to take part in folding lamellae of semi-crystalline polyamide, inner blocks are not. They operate as a spacer, meaning that the end blocks of copolymers capable of folding become parts of different lamellae, or that the unfoldable part of a block copolymer is pushed out of a folding lamella with a certain probability of the remaining outer block taking part in folding another lamella. This increases the number of tie-molecules.     

Collapse-free thermal bonding technique for large area microchambers in plastic lab-on-a-chip applications

Bonding is an essential step to form microchannels or microchambers in lab-on-a-chip applications. In this paper, we present a novel plastic thermal bonding technique to seal and form large area microchambers (planar characteristic width and length on the order of 1 mm and characteristic thickness on the order of 10–100 μm) without collapse by introducing a holed pressure equalizing plate (HPEP) that includes holes of the same size and shape as the microchambers. To demonstrate the proposed technique, two types of large area microchambers [(1) 20 × 10 mm and 40 μm thick and (2) 12 × 2.5 mm and 120 μm thick] with microchannels were designed and replicated on plastic substrates by means of hot embossing and injection molding processes with prepared two nickel mold inserts. The replicated large area microchambers as well as the microchannels in the plastic lab-on-a-chip were successfully sealed (i.e., no leakage) and formed without any collapse by the proposed thermal bonding technique with the help of the HPEP.     

Scalable optical hypercube-based interconnection network for massively parallel computing

Two important parameters of a network for massively parallel computers are scalability and modularity. Scalability has two aspects: size and time (or generation). Size scalability refers to the property that the size of the network can be increased with nominal effect on the existing configuration. Also, the increase in size is expected to result in a linear increase in performance. Time scalability implies that the communication capabilities of a network should be large enough to support the evolution of processing elements through generations. A modular network enables the construction of a large network out of many smaller ones. The lack of these two important parameters has limited the use of certain types of interconnection networks in the area of massively parallel computers. We present a new modular optical interconnection network, called an optical multimesh hypercube (OMMH), which is both size and time scalable. The OMMH combines positive features of both the hypercube (small diameter, high connectivity, symmetry, simple routing, and fault tolerance) and the torus (constant node degree and size scalability) networks. Also presented is a three-dimensional optical implementation of the OMMH network. A basic building block of the OMMH network is a hypercube module that is constructed with free-space optics to provide compact and high-density localized hypercube connections. The OMMH network is then constructed by the connection of such basic building blocks with multiwavelength optical fibers to realize torus connections. The proposed implementation methodology is intended to exploit the advantages of both space-invariant free-space and multiwavelength fiber-based optical interconnect technologies. The analysis of the proposed implementation shows that such a network is optically feasible in terms of the physical size and the optical power budget.