Optical Fiber Cable Measurements in the Field

The optical fiber cable measurement instruments developed by NTF for field use in the 1.3 μm wavelength are discussed. The properties of a stabilized optical light source for single-mode fiber attenuation measurement, optical time-domain reflectometer using a Q-switched Nd:YAG laser as a light source, and chromatic dispersion measurement instrument are described. From the measurement results, these instruments are revealed to be suitable in constructing and maintaining singlemode fiber optical transmission lines.     

High Field ESR System and Its Application to the Study of Quantum Spin Systems

Developments of the high field ESR system in Kobe University is presented. Using Gunn oscillators and backward traveling oscillators (BWO), we can cover the frequency region from 30 to 1183.6 GHz with the use of InSb detector. Pulsed magnetic field up to 30 T is available and we are now trying to extend the field up to 40 T. Temperature range is from 1.8 to 300 K. Using this system, we studied S=1/2 ladder like system Cu₂(C₅H₁₂N₂)₂Cl₄, and found a new magnetic transition at 10.1 T at 1.8 K. The temperature dependence of ESR in Cu₂(C₅H₁₂N₂)₂CI₄ shows g-shift below 8 K which corresponds to the maximum of the magnetic susceptibility. The g-shift below 8 K suggests the increase of the quantum fluctuation in the system, and the role of the quantum fluctuation in Cu₂(C₅H₁₂N₂)₂CI₄ is discussed.     

Noise characteristics of Er3+-doped fiber amplifierspumped by 0.98 and 1.48 μm laser diodes

Measured noise characteristics of Er³⁺-doped optical fiber amplifiers pumped by 0.98- and 1.48-μm laser diodes (LDs) are reported. The noise figures estimated from the beat noise between signal and spontaneous emission are 3.2 dB for pumping by 0.98-μm LD and 4.1 dB for pumping by 1.48-μm LD. The beat noise between spontaneous emission components and the spontaneous shot noise for the 0.98-μm pumping are lower than those for the 1.48-μm pumping     

Study on fabrication of 3-D microstructures by synchrotron radiation based on pixels exposed lithography

We report research on the development of a method of fabricating three-dimensional microstructures that uses synchrotron radiation light. Some research on three-dimensional processing methods using SR lithography has already been reported. They have involved techniques of applying exposure energy distributions to resist surfaces. Complicated energy distributions need to be applied to resist surfaces to fabricate arbitrary three-dimensional structures. However, we devised a new method that made it possible to fabricate arbitrary three-dimensional microstructures by using a mask with pattern created function. The advantages of this method are that it is suitable for rapid prototyping and it reduces the fabrication time and cost since it is not necessary to fabricate conventional photolithographic masks. Our research involved a basic experiment on this method of fabrication where we succeeded in fabricating a free-form surface by exposing it through an overlapping array of pixels that created a single aperture. Moreover, the pixel size could be made smaller than the aperture size by overlapping adjoining pixels.     

Negative Pore Air Pressure Generation in Backfill of Retaining Walls During Earthquakes and its Effect on Seismic Earth Pressure

In order to investigate the seismic behavior of conventional type and geosynthetic-reinforced soil retaining walls, 1-g model shaking tests were conducted. Model walls having a height of about 50 cm were placed on a subsoil layer and backfilled with a layer of dense dry Toyoura sand. They were subjected to several steps of horizontal irregular excitations. As a result, generation of negative pore air pressure in the backfill was observed. The maximum amplitude of the negative pore air pressure during each shaking step increased with the base acceleration. Based on analyses of the measured data, it was inferred that such negative pore air pressure was caused by outward wall displacement relative to the backfill and not by dilative behavior of the backfill. It would cause a reduction in the seismic earth pressures exerted from the backfill. This feature suggests an advantage of a rigid full-height facing for reinforced soil walls over the segmental types of facing. A simplified numerical procedure to evaluate earth pressure was applied while considering the effects of the negative pore air pressure, and it could qualitatively simulate the measured behavior in terms of the seismic earth pressure and the angle of failure plane in the backfill.     

Oxide ionic conductivities of apatite-type lanthanum silicates and germanates and their possibilities as an electrolyte of lower temperature operating SOFC

Electrical properties of La_xM₆O_12+1.5x (M = Si, Ge) as an electrolyte for solid oxide fuel cell (SOFC) have been investigated. In La_xSi₆O_12+1.5x and La_xGe₆O_12+1.5x of x = 8–11, the highest conductivities were achieved at x = 9.7 (La_9.7Si₆O_26.55) and x = 9.0 (La_9.0(GeO₄)₆O_1.5), respectively. The conductivity of La_9.0(GeO₄)₆O_1.5 was higher than that of La_9.7Si₆O_26.55 in a temperature region higher than 700 °C, and the conductivity (2.4 × 10⁻³ S cm⁻¹) of La_9.7Si₆O_26.55 at 400 °C was higher than that (8.3 × 10⁻⁵ S cm⁻¹) of La_9.0(GeO₄)₆O_1.5. The power densities of SOFC (H₂ | Pt | electrolyte (thickness: 1 mm) | Pt | O₂) using La_9.0(GeO₄)₆O_1.5 as an electrolyte were 14.3 mW cm⁻² (700 °C) and 24.0 mW cm⁻² (800 °C). The corresponding SOFC using La_9.7Si₆O_26.55 was found to work even at lower temperatures of 400 and 500 °C with power densities of 0.011 and 0.12 mW cm⁻². The SOFC (H₂ | Ni–Sm_0.2Ce_0.8O_1.9 | electrolyte | Ba_0.5Sr_0.5Co_0.8Fe_0.2O_2.5 | air) using 0.3 mm thickness La_9.7Si₆O_26.55 electrolyte gave the 3.4 mW cm⁻² power density at 500 °C.     

Effects of sea surface temperature accuracy on offshore wind resource assessment using a mesoscale model

Offshore wind simulations were performed with the Weather Research and Forecasting (WRF) model driven by three different sea surface temperature (SST) datasets for Japanese coastal waters to investigate the effect of the SST accuracies on offshore wind simulations. First, the National Centers for Environmental Prediction Final analysis (FNL) (1° × 1° grid resolution) and the Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) (0.05° × 0.05° grid resolution) datasets were compared with in situ measurements. The results show a decrease in accuracy of these datasets toward the coast from the open ocean. Aiming at an improved accuracy of SST data, we developed a new high‐resolution SST dataset (0.02° × 0.02° grid resolution). The new dataset referred to as MOSST is based on the Moderate Resolution Imaging Spectroradiometer (MODIS) product, provided by the Japan Aerospace Exploration Agency (JAXA). MOSST was confirmed to be more accurate than FNL and OSTIA for the coastal waters. Then, WRF simulations were carried out for 1 year with a 2 km grid resolution and by using the FNL, OSTIA and MOSST datasets. The use of the OSTIA dataset for a WRF simulation was found to improve the accuracy when compared with the FNL dataset, and further improvement was obtained when the MOSST dataset was applied. The sensitivity of wind speed and wind energy density to SST is also discussed. We conclude that the use of an accurate SST is a key factor not only for realistic offshore wind simulations near the surface but also for accurate wind resource assessments at the hub height of wind turbines. Copyright © 2014 John Wiley & Sons, Ltd.     

A novel dynamic survivable routing in WDM optical networks with/without sparse wavelength conversion

In this paper, we study the dynamic survivable routing problem, both in optical networks without wavelength conversion and in optical networks with sparse wavelength conversion, and propose a novel hybrid algorithm for it based on the combination of mobile agents technique and genetic algorithms (GA). By keeping a suitable number of mobile agents in the network to cooperatively explore the network states and continuously report cycles (that are formed by two disjoint-link routes) into the routing tables, our new hybrid algorithm can promptly determine the first population of cycles for a new request based on the routing table of its source node, without the time consuming process associated with current GA-based lightpath protection schemes. We further improve the performance of our algorithm by introducing a more advanced fitness function that is suitable for both the above networks. Extensive simulation studies on the ns-2 network simulator show that our hybrid algorithm achieves a significantly lower blocking probability than the conventional survivable routing algorithms for all the cases we studied.     

Bis-(monoacylglyceryl) phosphate and acyl phosphatidylglycerol isolated from human livers of lipidosis induced by 4,4′-diethylaminoethoxyhexesterol

Bis-(monoacylglyceryl) phosphate and acyl phosphatidylglycerol were isolated from the liver of two patients with lipidosis induced by 4,4′-diethylaminoethoxyhexesterol. Identification was based upon the results of alkaline hydrolysis, acetolysis, IR spectrometry, and upon the determination of molar ratio of phosphorus-glycerol-ester. The contents of the bis-(monoacylglyceryl) phosphate were 10 and 16% total phospholipid phosphorus in them. The bis-(monoacylglyceryl) phosphate contained mainly docosahexaenoic (42%), oleic (29%), and linoleic acid (14%) and had the hemolytic activity of ca. one-eighth lysolecithin from egg yolk. Acidic lipids from the liver also were found to contain a lipid which is less polar than bis-(monoacylglyceryl) phosphate. The results of lipid analysis showed that the lipid possessed the structure of an acyl phosphatidylglycerol, and its content was ca. 2% total phospholipid phosphorus. Accumulation of 4,4′-diethylaminoethoxyhexesterol and its derivatives was found in clinical cases by thin layer chromatography and IR spectrometry. This fact suggested that human liver has an ability to metabolize the drug.