Development of a new advanced process for manufacturing polyacetal resins. Part III. End-capping during polymerization for manufacturing acetal homopolymer and copolymer

Conventionally, acetal homopolymer or copolymer is obtained by the polymerization of formaldehyde or trioxane, following the end-capping using acetic anhydride or unzipping of the unstable polymer end fraction. First, Asahi Chemical developed a new process to obtain an end-capped polymer during polymerization of highly purified formaldehyde using acetic anhydride as the chain-transfer agent. Use of highly purified formaldehyde and endcapping during polymerization using acetic anhydride as a chain-transfer agent or an endcapping agent will provide a simple process for manufacturing acetal homopolymer. The polymerization mechanism was confirmed by infrared spectroscopy analysis and proton NMR analysis of the polymer obtained. Second, for the acetal copolymer, purified trioxane was copolymerized with ethylene oxide in the presence of methylal, which gave an endcapped polymer with high thermal stability. Two new intermediates from the initiation reaction of the copolymerization, 1,3,5,7-tetraoxacyclononane (TOCN) and 1,3,5,7,10-pentaoxacyclododecane (POCD), were isolated and a new initiation mechanism was proposed. © 1993 John Wiley & Sons, Inc.     

Excessive closure of the right eye: a new sign of infarction in the territory of the ipsilateral right middle cerebral artery

In right middle cerebral territory infarction a new sign, excessive closure of the right eye ipsilateral to the lesion and mild closure of the left eye on command, was noted. The excessive ipsilateral eye closure was not observed on spontaneous eye closure.     

A high-speed vector-controlled spindle motor drive with closedtransition between with encoder control and without encoder control

A 40000-r/min vector-controlled induction motor drive is introduced. The vector control of induction motors has been widely accepted in spindle drives of machine tools where they replace conventional DC motors because of the low maintenance requirements. Another important feature of the AC spindle drive is its high-speed capability. The magnetic encoder is most widely used as the speed detector because it is suited for use in an adverse environment. However, the magnetic encoder with high resolution and a high S/N ratio loses the output pulses at extremely high speed. In the drive system introduced, the conventional vector control is used in the low-speed range, and the vector control without the encoder is used in the high-speed range. Close transition between two modes is made without interrupting the operation     

Interaction of two close quantized vortices in superfluid4He

The three-dimensional dynamics of two interacting quantized vortex filaments is studied. The equations of motion and the method of numerical calculation follow Schwarz. Whether two approaching filaments reconnect or not depends on their arrangement before approach. When a ring moves toward a line from a distance, only within a critical initial distance they can reconnect. The critical distance is minimized when their circulations are parallel at the closest place, while it increases as their circulations begin to deviate from being parallel. Hence the reconnection probability can be less than unity.     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions     

Cerebral angioplasty in a patient with vascular dementia

A mechanical computerized three-dimensional scanner with a resolution of 1 micron was used to assess loss of enamel caused by orthodontic bonding and debonding. A total of 2646 measurements was performed on six human premolars. The results showed an average loss of enamel of 7.4 microns. The range was between 1 and 52 microns, which may account for discrepancies with earlier studies that measured only a few points per tooth surface.     

XIII. Yeast sequencing reports. Cloning and sequencing of the NES24 gene of Saccharomyces cerevisiae

We have cloned NES24 using a temperature-sensitive nes24-1 mutant as a host and sequenced a 3162 bp XhoI-EcoRI DNA fragment containing the NES24 gene. Computer analysis revealed that this segment contains a 1806 bp open reading frame which is needed for complementation of the nes24-1 mutation. We found SUP8 in the region upstream of the NES24 gene, placing the NES24 gene on chromosome XIII. A protein homology search indicated that NES24 encodes a new protein. The disruption of the NES24 gene resulted in temperature-sensitive growth. The sequence has been deposited in DDBJ/EmBL/GenBank data bases under Accession Number D15052.     

Neural network approach to land cover mapping

A pattern classification method is proposed for remote sensing data using neural networks. First, the authors apply the error backpropagation (BP) algorithm to classify the remote sensing data. In this case, the classification performance depends on a training data set. In order to get stable and precise classification results, the training data set is selected based on geographical information and Kohonen's self-organizing feature map. Using the training data set and the error backpropagation algorithm, a layered neural network is trained such that the training patterns are classified with a specified accuracy. After training the neural network, some pixels are deleted from the original training data set if they are incorrectly classified and a new training data set is built up. Once training is complete, a testing data set is classified by using the trained neural network. The classification results of LANDSAT TM data show that this approach produces excellent results which are more realistic and noiseless compared with a conventional Bayesian method     

Cytokines affecting survival and differentiation of an astrocyte progenitor cell line

The effects of various cytokines on survival and differentiation of an astrocyte progenitor cell line (AP-16) were examined. Epidermal growth factor (EGF) deprivation caused death of AP-16 cells by apoptosis. Transforming growth factor-alpha (TGF-alpha) and basic fibroblast growth factor (bFGF) prevented the apoptosis occurring in the absence of EGF. Leukemia inhibitory factor (LIF) and ciliary neurotrophic factor (CNTF) induced glial fibrillary acidic protein (GFAP) and decreased A2B5 antigen in AP-16 cells, indicating that these cytokines induced AP-16 cells to differentiate into astrocytes.