Global gene expression profiling of androgen disruption in Qurt strain medaka

Androgen disrupting chemicals (ADCs) are endocrine disrupting chemicals (EDCs) that mimic or antagonize the effect of physiological androgens. Microarray-based detection of altered gene expression can be used as a biomarker of EDC exposure. Therefore, the purpose of this study was to identify and compare gene expression profiles of the androgen 11-ketotestosterone (11-KT), the antiandrogen flutamide (FLU), and the antiandrogenic fungicide vinclozolin (VIN), on Qurt medaka (Oryzias latipes). Biologically effective concentrations for 11-KT (100 microg/L), VIN (100 microg/L), and FLU (1000 microg/L) determined in range-finding studies were used for exposures. The oligonucleotide microarray included 9379 probes for EDC-affected genes, medaka cDNAs, sequences from the medaka genome project, and the UniGene database. We found that treatment with FLU, VIN, and 11-KT caused significant (false discovery rate = 0.01) differential expression of at least 87, 82, and 578 genes, respectively. Two sets of responsive genes are associated to vertebrate sex differentiation and growth, and 50 genes were useful in discriminating between ADC classes. The discriminating capacity was confirmed by a remarkable similarity of the antiandrogenic expression profiles of VIN and FLU, which were distinct from the androgenic profile of 11-KT. Gene expression profiles characterized in this study allow for reliable screening of ADC activity.     

Survival of SA11 rotavirus in fresh fruit juices of pineapple, papaya, and honeydew melon

Survival of rotavirus in fresh fruit juices of papaya (Caraca papaya L.), honeydew melon (Cucumis melo L.), and pineapple (Ananas comosus [L.] Merr.) was studied. Clarified juices were prepared from pulps of ripe fruits and sterilized by ultrafiltration. One milliliter of juice from each fruit was inoculated with 20 microl of 1 x 10(6) PFU of SA11 rotavirus and sampled immediately (0-h exposure) and 1 and 3 h later at 28 degrees C. Mean viral titers in juices of papaya (pH 5.1) and honeydew melon (pH 6.3) at 1 and 3 h were not significantly different from titers at 0-h exposure. Mean viral titers in juices from pineapples with ripening color indices of 3 (pH 3.6) and 6 (pH 3.7) at 1-h exposure (color index 3: 4.0 +/- 1.7 x 10(4); color index 6: 2.3 +/- 0.3 x 10(5)) and 3-h exposure (color index 3: 1.1 +/- 0.4 x 10(4); color index 6:1.3 +/- 0.6 x 10(5)) were significantly lower than titers at 0-h exposure (color index 3: 5.7 +/- 2.9 x 10(5); color index 6: 7.4 +/- 1.3 x 10(5)). Virus titers in pineapple juices of color index 3 were significantly lower than titers of the virus in juices of index 6. In cell culture medium (pH 7.4), SA11 titer remained stable over 3 h at 28 degrees C. However, at pH 3.6, the virus titer was reduced to a level not significantly different from that of the virus in pineapple juice of color index 6 (pH 3.7). In conclusion, papaya and honeydew melon juices, in contrast to pineapple juice, have the potential to transmit rotavirus. Inactivation of SA11 virus in pineapple juice can be possibly attributed to low pH and constituent(s) in the juice.     

Targeted Delivery of Anesthetic Agents to Bone Tissues using Conductive Microneedles Enhanced Iontophoresis for Painless Dental Anesthesia

Pain management during dental procedures is a cornerstone for successful daily practice. In current practice, the traditional needle and syringe injection is used to administer local anesthesia. However, the appearance of long needles and the pain associated with it often leads to dental anxiety deterring timely interventions. Microneedles (MNs) have emerged as a minimally invasive alternative to hypodermic needles and shown to be effective in transdermal drug delivery applications. In this article, the potential use of MNs for local anesthesia delivery in dentistry is explored. The development of a novel conductive MN array that can be used in combination with iontophoresis technique to achieve drug penetration through the oral mucosa and the underlying bone tissue is presented. The conductive MN array plays a dual-role, creating micro-conduits and lowering the resistance of the oral mucosa. The reduced tissue resistance further enhances the application of a low-voltage current that is able to direct and accelerate the drug molecules to target the sensory nerves supplying teeth. The successful delivery of lidocaine using this new strategy in a clinically relevant rabbit incisor model is shown to be as effective as the current gold standard.     

Biologization of Pcl-Mesh Using Platelet Rich Fibrin (Prf) Enhances Its Regenerative Potential In Vitro

Introduction: Resorbable synthetic scaffolds are promising for different indications, especially in the context of bone regeneration. However, they require additional biological components to enhance their osteogenic potential. In addition to different cell types, autologous blood-derived matrices offer many advantages to enhance the regenerative capacity of biomaterials. The present study aimed to analyze whether biologization of a PCL-mesh coated using differently centrifuged Platelet rich fibrin (PRF) matrices will have a positive influence on primary human osteoblasts activity in vitro. A polymeric resorbable scaffold (Osteomesh, Osteopore^TM (OP), Singapore) was combined with differently centrifuged PRF matrices to evaluate the additional influence of this biologization concept on bone regeneration in vitro. Peripheral blood of three healthy donors was used to gain PRF matrices centrifuged either at High (710× g, 8 min) or Low (44× g, 8 min) relative centrifugal force (RCF) according to the low speed centrifugation concept (LSCC). OP-PRF constructs were cultured with pOBs. POBs cultured on the uncoated OP served as a control. After three and seven days of cultivation, cell culture supernatants were collected to analyze the pOBs activity by determining the concentrations of VEGF, TGF-β1, PDGF, OPG, IL-8, and ALP- activity. Immunofluorescence staining was used to evaluate the Osteopontin expression of pOBs. After three days, the group of OP+PRF_Low+pOBs showed significantly higher expression of IL-8, TGF-ß1, PDGF, and VEGF compared to the group of OP+PRF_High+pOBs and OP+pOBs. Similar results were observed on day 7. Moreover, OP+PRF_Low+pOBs exhibited significantly higher activity of ALP compared to OP+PRF_High+pOBs and OP+pOBs. Immunofluorescence staining showed a higher number of pOBs adherent to OP+PRF_Low+pOBs compared to the groups OP+PRF_High+pOBs and OP+pOBs. To the best of our knowledge, this study is the first to investigate the osteoblasts activity when cultured on a PRF-coated PCL-mesh in vitro. The presented results suggest that PRF_Low centrifuged according to LSCC exhibits autologous blood cells and growth factors, seem to have a significant effect on osteogenesis. Thereby, the combination of OP with PRF_Low showed promising results to support bone regeneration. Further in vivo studies are required to verify the results and carry out potential results for clinical translation.     

Heavy Water Additive in Formamidinium: A Novel Approach to Enhance Perovskite Solar Cell Efficiency

Heavy water or deuterium oxide (D₂O) comprises deuterium, a hydrogen isotope twice the mass of hydrogen. Contrary to the disadvantages of deuterated perovskites, such as shorter recombination lifetimes and lower/invariant efficiencies, the serendipitous effect of D₂O as a beneficial solvent additive for enhancing the power conversion efficiency (PCE) of triple-A cation (cesium (Cs)/methylammonium (MA)/formaminidium (FA)) perovskite solar cells from ≈19.2% (reference) to 20.8% (using 1 vol% D₂O) with higher stability is reported. Ultrafast optical spectroscopy confirms passivation of trap states, increased carrier recombination lifetimes, and enhanced charge carrier diffusion lengths in the deuterated samples. Fourier transform infrared spectroscopy and solid-state NMR spectroscopy validate the N–H₂ group as the preferential isotope exchange site. Furthermore, the NMR results reveal the induced alteration of the FA to MA ratio due to deuteration causes a widespread alteration to several dynamic processes that influence the photophysical properties. First-principles density functional theory calculations reveal a decrease in PbI₆ phonon frequencies in the deuterated perovskite lattice. This stabilizes the PbI₆ structures and weakens the electron–LO phonon (Fröhlich) coupling, yielding higher electron mobility. Importantly, these findings demonstrate that selective isotope exchange potentially opens new opportunities for tuning perovskite optoelectronic properties.     

Mass spectrometry-based "omics" technologies in cancer diagnostics

Many "omics" techniques have been developed for one goal: biomarker discovery and early diagnosis of human cancers. A comprehensive review of mass spectrometry-based "omics" approaches performed on various biological samples for molecular diagnosis of human cancers is presented in this article. Furthermore, the existing and potential problems/solutions (both de facto experimental and bioinformatic challenges), and future prospects have been extensively discussed. Although the use of present omic methods as diagnostic tools are still in their infant stage and consequently not ready for immediate clinical use, it can be envisaged that the "omics"-based cancer diagnostics will gradually enter into the clinic in next 10 years as an important supplement to current clinical diagnostics.     

A 2D MEMS mirror with sidewall electrodes applied for confocal MACROscope imaging

This paper presents microelectromechanical system micromirrors with sidewall electrodes applied for use as a Confocal MACROscope for biomedical imaging. The MACROscope is a fluorescence and brightfield confocal laser scanning microscope with a very large field of view. In this paper, a microelectromechanical system mirror with sidewall electrodes replaces the galvo-scanner and XYZ-stage to improve the confocal MACROscope design and obtain an image. Two micromirror-based optical configurations are developed and tested to optimize the optical design through scanning angle, field of view and numerical aperture improvement. Meanwhile, the scanning frequency and control waveform of the micromirror are tested. Analysing the scan frequency and waveform becomes a key factor to optimize the micromirror-based confocal MACROscope. When the micromirror is integrated into the MACROscope and works at 40 Hz, the micromirror with open-loop control possesses good repeatability, so that the synchronization among the scanner, XYZ-stage and image acquisition can be realized. A laser scanning microscope system based on the micromirror with 2 μm width torsion bars was built and a 2D image was obtained as well. This work forms the experimental basis for building a practical confocal MACROscope.     

A galerkin finite element scheme for the rectangular gas-lubricated slider bearing — the transient case

A finite element method for the computation of pressures and load-bearing characteristics of gas-lubricated slider bearings is presented. Steady state bearing characteristics are established by integrating the time-dependent equations. Results are presented for some test problems, including a rectangular slider bearing and two one-dimensional problems for which analytic solutions are known.     

A Soft Resistive Acoustic Sensor Based on Suspended Standing Nanowire Membranes with Point Crack Design

An artificial basilar membrane (ABM) is an acoustic transducer that mimics the mechanical frequency selectivity of the real basilar membrane, which has the potential to revolutionize current cochlear implant technology. While such ABMs can be potentially realized using piezoelectric, triboelectric, and capacitive transduction methods, it remains notoriously difficult to achieve resistive ABM due to the poor frequency discrimination of resistive‐type materials. Here, a point crack technology on noncracking vertically aligned gold nanowire (V‐AuNW) films is reported, which allows for designing soft acoustic sensors with electric signals in good agreement with vibrometer output—a capability not achieved with corresponding bulk cracking system. The strategy can lead to soft microphones for music recognition comparable to the conventional microphone. Moreover, a soft resistive ABM is demonstrated by integrating eight nanowire‐based sensor strips on a soft trapezoid frame. The wearable ABM exhibits high‐frequency selectivity in the range of 319–1951 Hz and high sensitivity of 0.48–4.26 Pa^?1. The simple yet efficient fabrication in conjunction with programmable crack design indicates the promise of the methodology for a wide range of applications in future wearable voice recognition devices, cochlea implants, and human–machine interfaces.