Training Sequence Aided Signature Waveform Estimation

In code division multiple access channels multiuser detection techniques are known to be effective strategies to counter the presence of multiuser interference towards improving spectral efficiency. Generally, multiuser detectors can provide excellent performance only when the signature waveforms of all users are precisely known. Hence, the estimation of signature waveforms is a challenging issue in mobile communication systems. In this paper, we compare the performance of two short training sequence aided signature waveform estimators. One is maximum likelihood type signature waveform estimator that requires the knowledge of spreading sequences and short training sequences. The other estimator is recently proposed based on subspace method and requires the knowledge of training sequences only. Through the simulations, we show the signature waveform estimation performance of both systems and the effect of the estimation error on the performance of a multiuser detector. The complexity comparisons of both systems are also given. We use the term “signature waveform” to refer to the convolution of the channel and the spreading code throughout the paper. Hasan AMCA was born in 1961 in Nicosia-Cyprus. He graduated from the Higher Technological Institute in Magosa – Cyprus (which is renamed later as Eastern Mediterranean University). He joined EMU in 1985 after receiving a M.Sc. (Digital Signal Processing) degree from the University of Essex in England (1985). He took his Ph.D. (Mobile Communications) from the University of Bradford where he was on a Commonwealth scholarship. He has been teaching in the Electrical and Electronic Engineering Department of Eastern Mediterranean University since 1993 where he also served as the Vice Chairman from Spring 1998 to Spring 2000. He has been appointed as the Director of the School of Computing and Technology of the EMU since Spring 2000. His research interests include Multi User Detection of CDMA signals, Adaptive Equalisation, Multi Carrier Systems, Mobile Radio Systems and Networks, Internet and Information Technology Applications in Education. Ahmet Rizaner was born in Larnaca, Cyprus, on January 31, 1974. He received the B.S. and M.S. degrees in Electrical and Electronics Engineering from the Eastern Mediterranean University, Famagusta, North Cyprus, in 1996 and 1998, respectively. He completed his PhD. degree in Electrical and Electronic Engineering in Eastern Mediterranean University and joined Eastern Mediterranean University as a lecturer in 2004. He is lecturing in the School of Computing and Technology. His main research interests include CDMA communications, adaptive channel estimation, and multiuser detection technique. Kadri Hacioğlu was born in Nicosia, Cyprus. He received the B.Sc., M.Sc., and Ph.D. degrees in electrical and electronic engineering from the Middle East Technical University, Ankara, Turkey, in 1980, 1984, and 1990, respectively. After his two-year military service, in 1992, he joined the faculty of Eastern Mediterranean University, Magosa, North Cyprus, as an Assistant Professor, and became an Associate Professor in 1997. While there, he taught several classes on electronics, digital communications, speech processing and neural networks. During this time, he conducted research on applying fuzzy logic, neural networks, and genetic algorithms to signal processing and communications problems. From 1998 to 2000, he was a Visiting Professor in the Department of Computer Science, University of Colorado, Boulder. Here, he taught classes on neural networks and continued his research. Since 2000, he has been a Research Associate at the Center for Spoken Language Research, University of Colorado. He has authored or coauthored numerous papers and supervised a dozen M.Sc./Ph.D. theses. His current research interests are concept-based language modeling, speech understanding, natural language generation, and search methods in speech recognition/understanding. He also does research on multiuser detection and equalization in CDMA systems. Ali Hakan Ulusoy was born in Eskişehir, Turkey, on June 3, 1974. He graduated from the double major program of the department of Electrical and Electronic Engineering and department of Physics in Eastern Mediterranean University as the first rank student of Faculty of Engineering in 1996. He received his M.S. degree in Electrical and Electronic Engineering in Eastern Mediterranean University in 1998. He completed his Ph.D. degree in Electrical and Electronic Engineering in Eastern Mediterranean University and joined Eastern Mediterranean University as a lecturer in 2004. He is lecturing in the School of Computing and Technology. His current research interests include receiver design, multi-user detection techniques, blind and trained channel estimation in Code Division Multiple Access (CDMA).     

Ultra low power frequency divider for 2.45 GHz ZigBee frequency synthesizer

An ultra low power CMOS frequency divider whose modulus can be varied from 481 to 496 is presented. It has been customized to be used in 2.45 GHz Integer-N PLL frequency synthesizers utilized in ZigBee standard. Its based on swallow divider that replaces the swallow counter by a simple digital circuit in order to reduce power consumption and design complexity. Also a low power and high speed divide-by-7/8 is presented. Post layout simulation results exhibit 420 μW power consumption for 4 bit frequency divider in 2.45 GHz ISM frequency band that proves 40 % reduction compared to same previous works. All of the circuits have been designed in 0.18 μm TSMC CMOS technology with a single 1.8 V DC voltage supply.     

Mobility management architectures based on joint mobile IP and SIP protocols

In the all-IP wireless networks beyond the third generation, mobility management can be effectively achieved by applying mobile IP (MIP) and the session initiation protocol (SIP) jointly. Nevertheless, an efficient combination of both protocols remains an open research issue. Conventional hybrid MIP-SIP mobility architectures operate MIP and SIP almost independently, resulting in significant redundant costs. This article investigates the representative hybrid MIP-SIP architectures and explores the joint optimizations between MIP and SIP for a more cost-efficient mobility support whilst utilizing their complementary power. Two novel design approaches are presented. The first approach culminates in a tightly integrated architecture, which merges the redundant mobility entities in MIP and SIP to yield maximum system efficiency. The other approach leads to a loosely integrated architecture, where necessary interactions are introduced between MIP and SIP mobility servers while their physical entities are kept intact. Major mobility procedures, including location update, session setup and handoff, are discussed in these architectures. The analytical results demonstrate that both proposed architectures outperform typical hybrid MIP-SIP architectures in terms of clear-cut reduced signaling costs     

MOCVD Growth of Erbium Monoantimonide Thin Filmand Nanocomposites for Thermoelectrics

We report the growth of erbium monoantimonide (ErSb) thin films on indium antimonide (100) substrates by low-pressure metalorganic chemical vapor deposition. The growth rate of ErSb thin films shows strong dependency on the growth temperature and the Sb/Er precursor molar flow rate ratio. Scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffractometry (XRD) were employed to study the ErSb thin films grown under the growth conditions that gave the maximum growth rate in the range we investigated. We also report the growth of two types of nanocomposites in which ErSb nanocolumns or nanoslabs with lengths ~500 nm and diameters 20 nm to 30 nm are embedded in Zn-doped InGaSb (ErSb/InGaSb:Zn) and ErSb nanoparticles with diameters of ~30 nm are embedded in Zn-doped InSbAs (ErSb/InSbAs:Zn). These nanocomposites were intended to increase phonon scattering in a mid-to-long phonon wavelength range to reduce lattice thermal conductivity. We used time-domain thermoreflectance to measure total thermal conductivity for the two types of nanocomposites, obtaining 4.0 ± 0.6 W/mK and 6.7 ± 0.8 W/mK for the ErSb/InAsSb:Zn and ErSb/InGaSb:Zn nanocomposites, respectively, which suggests that the thermal conductivity was close to or slightly smaller than the alloy limit of the two ternary alloy hosts. The two nanocomposites were further studied by transmission electron microscopy (TEM) to reveal their microscopic features and by XRD to assess their crystalline structures.     

Gaussian orthogonal matrix transform approach for PAPR reduction of optical OFDM signals

Optical orthogonal frequency division multiplexing (O-OFDM) has been widely adopted as a high-speed data transmission technique in visible light communication systems. This technique usually suffers from high peak-to-average-power ratio (PAPR). In this paper, a new PAPR reduction technique is proposed for O-OFDM signals. At the transmitter, a matrix transformation with the Gaussian elements is applied to the time-domain O-OFDM signal and at the receiver, the inverse matrix is used to recover the original signal. We show that the Gaussian orthogonal matrices can reconstruct the original signals without degrading the bit error rate (BER) performance. Gram-Schmidt technique is used to orthogonalize the Gaussian matrices. Computer simulations are conducted for 16-QAM baseband modulated symbols and about 3 dB PAPR reduction gain is achieved by the proposed approach compared with conventional O-OFDM.     

Task scheduling mechanisms in cloud computing: A systematic review

Today, cloud computing has developed as one of the important emergent technologies in communication and Internet. It offers on demand, pay per use access to infrastructure, platforms, and applications. Due to the increase in its popularity, the huge number of requests need to be handled in an efficient manner. Task scheduling as one of the challenges in the cloud computing supports the requests for assigning a particular resource so as to perform effectively. In the resource management, task scheduling is performed where there is the dependency between tasks. Many approaches and case studies have been developed for the scheduling of these tasks. Up to now, a systematic literature review (SLR) has not been presented to discover and evaluate the task scheduling approaches in the cloud computing environment. To overcome, this paper presents an SLR‐based analysis on the task scheduling approaches that classify into (a) single cloud environments that evaluate cost‐aware, energy‐aware, multi‐objective, and QoS‐aware approaches in task scheduling; (b) multicloud environment that evaluates cost‐aware, multi‐objective, and QoS‐aware task scheduling; and (c) mobile cloud environment that is energy‐aware and QoS‐aware task scheduling. The analytical discussions are provided to show the advantages and limitations of the existing approaches.     

A wrapper‐based feature selection for improving performance of intrusion detection systems

Along with expansion in using of Internet and computer networks, the privacy, integrity, and access to digital resources have been faced with permanent risks. Due to the unpredictable behavior of network, the nonlinear nature of intrusion attempts, and the vast number of features in the problem environment, intrusion detection system (IDS) is regarded as the main problem in the security of computer networks. A feature selection technique helps to reduce complexity in terms of both the executive load and the storage by selecting the optimal subset of features. The purpose of this study is to identify important and key features in building an IDS. To improve the performance of IDS, this paper proposes an IDS that its features are optimally selected using a new hybrid method based on fruit fly algorithm (FFA) and ant lion optimizer (ALO) algorithm. The simulation results on the dataset KDD Cup99, NSL‐KDD, and UNSW‐NB15 have shown that the FFA–ALO has an acceptable performance according to the evaluation criteria such as accuracy and sensitivity than previous approaches.     

Design of efficient power amplifier for low power transmitters

This paper presents a fully integrated, low transmit-power and high-efficiency 2.4 GHz class-E power amplifier (PA) in TSMC 0.18 μm CMOS process for low-power transmitters such as wireless sensor networks (WSN). In this paper, a new output load has been proposed. Also, analytical design equations have been included to design an efficient low power circuit. This PA, employs the pad capacitance and bond-wire inductance of the output node, for satisfying class-E zero-voltage switching (ZVS) condition and matching the antenna’s 50 Ω resistance. By using bond-wire inductance instead of inductor in the output filter, smaller chip size and higher efficiency has been achieved compared to other works for low transmit-power applications. Also, the effectiveness of bulk-drive technique on faster switching and increasing efficiency have been evaluated. It has been proved that this technique leads to increase the efficiency of switching PAs. This PA delivers a range of output power from 2.7 to 7.2 dBm with a supply voltage range from 500 to 850 mV while achieving overall power efficiency range of 57.3–60.7%.     

Structure–Thermodynamic‐Property Relationships in Cyanovinyl‐Based Microporous Polymer Networks for the Future Design of Advanced Carbon Capture Materials

Nitrogen‐rich solid absorbents, which have been immensely tested for carbon dioxide capture, seem until this date to be without decisive molecular engineering or design rules. Here, a family of cyanovinylene‐based microporous polymers synthesized under metal‐catalyzed conditions is reported as a promising candidate for advanced carbon capture materials. These networks reveal that isosteric heats of CO₂ adsorption are directly proportional to the amount of their functional group. Motivated by this finding, polymers produced under base‐catalyzed conditions with tailored quantities of cyanovinyl content confirm the systematical tuning of their sorption enthalpies to reach 40 kJ mol^?1. This value is among the highest reported to date in carbonaceous networks undergoing physisorption. A six‐point‐plot reveals that the structure–thermodynamic‐property relationship is linearly proportional and can thus be perfectly fitted to tailor‐made values prior to experimental measurements. Dynamic simulations show a bowl‐shaped region within which CO₂ is able to sit and interact with its conjugated surrounding, while theoretical calculations confirm the increase of binding sites with the increase of Ph? C?C(CN)? Ph functionality in a network. This concept presents a distinct method for the future design of carbon dioxide capturing materials.     

Comparison among emission and susceptibility reduction techniques for electromagnetic interference in digital integrated circuits

This paper presents a comparative study of susceptibility reduction techniques for electromagnetic interference (EMI) in digital integrated circuits (ICs). Both direct power injection (DPI) and very-fast transmission-line pulsing (VF-TLP) methods are used to inject interference into the substrate of a single test chip. This IC is built around six functionally identical cores, differing only by their EMI protection strategies (RC protection, isolated substrate, meshed power supply network) which were initially designed for low emission design rules. The ranking of three of these cores in terms of electromagnetic immunity is then compared with the one of their radiated emission, thanks to near-field scanning (NFS) measurements. This leads to the establishing of design guidelines for low EMI in digital ICs.