Laminar convection in the annulus of a double-pipe with triangular fins

A steady and laminar convective flow has been numerically simulated in the fully-developed annular region of a finned double-pipe subjected to the constant heat flux boundary condition imposed at the inner-pipe wall. Finite element method has been employed in this study. Friction factor and Nusselt number have been studied as flow characteristics against variations in the ratio of radii of the inner and the outer pipes, the fin height, the fin half angle and the number of fins. The results show significant enhancement in the heat transfer rate in both the cases when sufficient pumping power is available and when it is not. The minimum and maximum increase in the product of friction factor and Reynolds number relative to the finless geometry is more than one time and more than 40 times respectively while gain in the relative value of Nusselt number lies in the range 1–177. This provides an evidence of more than four times enhancement in the heat transfer coefficient relative to that in the pressure loss as a result of extended fin surfaces.     

Dataflow Architectures for GALS

In Kahn process network (KPN), the processes (nodes) communicate by unbounded unidirectional FIFO channels (arcs), with the property of non-blocking writes and blocking reads on the channels. KPN provides a semantic model of computation, where a computation can be expressed as a set of asynchronously communicating processes. However, the unbounded FIFO based asynchrony is not realizable in practice and hence requires refinement in real hardware. In this work, we start with KPN as the model of computation for GALS, and discuss how different GALS architectures can be realized. We borrow some ideas from existing dataflow architectures for our GALS designs.     

Flexible and Autonomous Integrated System for Characterizing Metal Oxide Gas Sensor Response in Dynamic Environment

Characterization and calibration of gas sensor is a complex problem due to the dynamic behavior of gases and the limitations of current technology. This article reports a flexible, robust, and autonomous integrated system that is able to perform characterization on metal oxide-based gas sensors in dynamic environments. The system controls the concentration and flow of the relevant gases into the gas chamber and simultaneously measuring the sensor response. This feature allows the characterization of the sensor under continuous dynamic flow of gases similar to conditions on a robot or flow pipes. Several experiments have been performed on the system using hydrogen sulfide. The results provide information on the general characteristics of the sensor as well as its sensitivity. The noise levels were studied with different reference voltages. Overall, the results verify that the system is reliable and able to produce repeatable measurements.     

Fast attack detection using correlation and summarizing of security alerts in grid computing networks

Due to the extensive growth of grid computing networks, security is becoming a challenge. Usual solutions are not enough to prevent sophisticated attacks fabricated by multiple users especially when the number of nodes connected to the network is changing over the time. Attackers can use multiple nodes to launch DDoS attacks which generate a large amount of security alerts. On the one hand, this large number of security alerts degrades the overall performance of the network and creates instability in the operation of the security management solutions. On the other hand, they can help in camouflaging other real attacks. To address these issues, a?correlation mechanism is proposed which reduces the security alerts and continue detecting attacks in grid computing networks. To obtain the more accurate results, a?major portion of the experiments are performed by launching DDoS and Brute Force (BF) attacks in real grid environment, i.e., the Grid??5000 (G5K) network.     

Extended temperature–entropy (T–s) diagrams for aqueous lithium bromide absorption refrigeration cycles

Temperature–entropy (T–s) diagrams have the unique capability of being able to quantify processes in terms of both the first and second laws of thermodynamics. Although use of generalised T–s diagrams has been made to indicate or represent generalised absorption cycles, with the exception for NH₃/water systems, these diagrams have not been specifically tailored to scale to quantify LiBr/water systems. The main barrier for this is that the diagram needs to represent the necessary properties of both the refrigerant (water) and of the solution (LiBr/water). This paper describes the use of the T–s diagram of water extended with additional curves to represent real and ideal LiBr/water absorption cycles. An explanation is provided on several methods available, including details of the thermodynamic justification of the method that was used, to construct the extended diagrams. Finally, the extended T–s diagram is provided with the representation of a real single-effect LiBr/water absorption refrigeration cycle. This should prove to be a valuable tool for design and research engineers to study and optimise LiBr/water chillers.     

Reliability analysis of nuclear containment without metallic liners against jet aircraft crash

The present study presents a methodology for detailed reliability analysis of nuclear containment without metallic liners against aircraft crash. For this purpose, a nonlinear limit state function has been derived using violation of tolerable crack width as failure criterion. This criterion has been considered as failure criterion because radioactive radiations may come out if size of crack becomes more than the tolerable crack width. The derived limit state uses the response of containment that has been obtained from a detailed dynamic analysis of nuclear containment under an impact of a large size Boeing jet aircraft. Using this response in conjunction with limit state function, the reliabilities and probabilities of failures are obtained at a number of vulnerable locations employing an efficient first-order reliability method (FORM). These values of reliability and probability of failure at various vulnerable locations are then used for the estimation of conditional and annual reliabilities of nuclear containment as a function of its location from the airport. To study the influence of the various random variables on containment reliability the sensitivity analysis has been performed. Some parametric studies have also been included to obtain the results of field and academic interest.     

Alzheimer paired helical filaments (PHFs) studied by high-resolution TEM: what can vertical Pt-C replication tell us about the organization of the pronase-digested PHF core?

Untreated paired helical filaments (PHFs) and pronase-digested PHF-core filaments were stereoscopically imaged with a freeze-drying vertical platinum-carbon replication preparation method for TEM. The untreated PHF have an average wide region (W) = 22.8 +/- 2.4 nm, a narrow region (T) = 10.6 +/- 1.7 nm, and a helical turn period (L) = 78.6 +/- 13.4. The surfaces of the untreated PHF's fuzzy coat appears disorganized. The widths of the pronase-treated PHF-core filaments were significantly reduced (W(d) = 14.8 +/- 1.2 nm, T(d) = 5.7 +/- 1.0 nm, and L(d) = 75.4 +/- 17 nm). The surfaces of the untreated PHF contained approximately 1.1 nm strands, the same size as tau monomer ( approximately 1.0 nm). The pronase-digested PHF cores mostly contained approximately 1.6 +/- 0.3 nm strands although strand diameters ranged from 0.6-2.5 nm. The strands sometimes appear to be wrapped around the filament axis; less often, they appear to be roughly parallel to the PHF axis, and otherwise appear to be randomly oriented. Images of pronase-digested PHF core images are discussed in relation to the core's biochemical composition, its proposed beta structure, and structural subunit models. Images of the untreated and the pronase-digested PHF support a helical ribbon morphology.     

Preparation of an exponentially rising optical pulse for efficient excitation of single atoms in free space

We report on a simple method to prepare optical pulses with exponentially rising envelope on the time scale of a few ns. The scheme is based on the exponential transfer function of a fast transistor, which generates an exponentially rising envelope that is transferred first on a radio frequency carrier, and then on a coherent cw laser beam with an electro-optical phase modulator. The temporally shaped sideband is then extracted with an optical resonator and can be used to efficiently excite a single (87)Rb atom.     

Oxy‐fuel combustion technology: current status,applications, and trends

The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre‐combustion, and post‐combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO₂). The oxycombustion process results in highly CO₂‐concentrated exhaust gases, which facilitates the capture process of CO₂ after H₂O condensation. The captured CO₂ can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy‐combustion integrated power plants and (iv) third generation technologies for CO₂ capture. Techno‐economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.