Three-layer flow membrane system on a microchip for investigation of molecular transport

A stable three-layer flow system, water/organic solvent/water, has been successfully applied for the first time in a microchannel to get rapid transport through an organic liquid membrane. In the continuous laminar flow region, the analyte (methyl red) was rapidly extracted across the microchannel from the donor to the acceptor phase through the organic solvent phase (cyclohexane). Thermal lens microscopy was used to monitor the process. The thickness of the organic phase, sandwiched by the two aqueous phases, was approximately 64 microm, and it was considered as a thin liquid organic membrane. Permeability studies showed the effects of molecular diffusion, layer thickness, and organic solvent-water partition coefficient on the molecular transport. In the microchip, complete equilibration was achieved in several seconds, in contrast to a conventionally used apparatus, where it takes tens of minutes. The thickness of the organic and aqueous boundary layers was defined as equal to the microchannel dimensions, and the organic solvent-water partition coefficient was determined on a microchip using the liquid/liquid extraction system. Experimental data on molecular transport across the organic membrane were in agreement with the calculated permeability based on the three-compartment water/organic solvent/water model. This kind of experiment can be performed only in a microspace, and the system can be considered as a potential biological membrane for future in vitro study of drug transport.     

An electrospray ionization source for integration with microfluidics

We have demonstrated a new electrospray ionization (ESI) device incorporating a tip made from a shaped thin film, bonded to a microfluidic channel, and interfaced to a time-of-flight mass spectrometer (TOFMS). A triangular-shaped thin polymer tip was formed by lithography and etching. A microfluidic channel, 20 microm wide and 10 microm deep, was embossed in a cyclo olefin substrate using a silicon master. The triangular tip was aligned with the channel and bonded between the channel plate and a flat plate to create a microfluidic channel with a wicking tip protruding from the end. This structure aided the formation of a stable Taylor cone at the apex of the tip, forming an electrospray ionization source. This source was tested by spraying several solutions for mass spectrometric analysis. Because the components are all made by lithographic approaches with high geometrical fidelity, an integrated array system with multiple channels can be formed with the same method and ease as a single channel. We tested a multichannel system in a multiplexed manner and showed reliable operation with no significant cross contamination between closely spaced channels.     

High-speed characterization and analysis of orange oils with tandem-column stop-flow GC and time-of-flight MS

High-speed GC with time-of-flight (TOF) MS detection is used for the characterization and analysis of oils rendered from the peel of five diverse species of orange including bergemot orange, bitter orange, tangerine, mandarin orange, and sweet orange. With a user-defined signal-to-noise threshold of 100, 44 peaks were found and 36 compounds identified in the various oils. Some major constituent components show large concentration ranges over the five species. A 14-m-long, 0. 18-mm-i.d. column ensemble consisting of 7.0-m lengths of a trifluoropropylmethyl polysiloxane and a 5% phenyl dimethyl polysiloxane column was temperature-programmed at 50 degrees C/min starting at the time of injection to achieve analysis times under 140 s. The TOFMS was operated with a spectral acquisition rate of 25 spectra/s, and automated peak finding software successfully found all of the components, with the exception of one severely overlapping peak pair in bitter-orange oil. Of the 44 peaks, 25 were identified by use of a TOFMS library created for this study; another 11 were identified with a commercial terpene library, and 8 were not identified. A quantitative comparison (percent of total peak area) is presented for 16 components, which comprise 98.8-99.5% of the total peak area for the five orange species. Stop-flow operation of the column ensemble is used to enhance selectivity for targeted component pairs to facilitate single-channel detection for QA/ QC analysis of characterized samples and to enhance column selectivity for TOFMS characterization in cases in which peak overlap is so severe that only a single peak is observed.     

High-accuracy position and orientation measurement of extended two-dimensional surfaces by a phase-sensitive vision method

We introduced recently phase measurements usually performed in interferometry to the domain of image processing and intelligent vision [IEEE Trans. Instrum. Meas. 49, 867 (2000)]. Our purpose is to sense with a high accuracy the position, orientation, and displacement of two-dimensional (2D) surfaces observed by a static vision system. We report on significant improvements of the method. Experimental measurements reveal a peak-valley noise of approximately 10(-2) CCD pixel, corresponding approximately to a 10(-3) period of the phase reference pattern. Then the observation of 10 microm scaled features enables an accuracy of a few nm in the position sensing of the phase reference pattern for the extended 2D measurement range.     

Parallel flow measurements in microstructures by use of a multifocal 4 x 1 diffractive optical fan-out element

We have developed a multifocal optical fluorescence correlation spectroscopy system for parallel flow analyses. Multifocal excitation was made possible through a 4 x 1 diffractive optical fan-out element, which produces uniform intensity in all four foci. Autocorrelation flow analyses inside a 20 microm x 20 microm square microchannel, with the 4 x 1 fan-out foci perpendicular to the flow direction, made it possible to monitor different flows in all four foci simultaneously. We were able to perform cross-correlation flow analyses by turning the microstructure, thereby having all four foci parallel to the direction of flow. Transport effects of the diffusion as a function of flow and distance could then also be studied.     

Variability of the downwelling diffuse attenuation coefficient with consideration of inelastic scattering

In situ time-series measurements of spectral diffuse downwelling irradiance from the Bermuda Testbed Mooring are presented. Averaged diffuse attenuation coefficients of downwelling irradiance, Kd,and their elastic and inelastic components are investigated at seven wavelengths. At shorter wavelengths (<510 nm), Kd is weakly dependent on the solar zenith angle owing to the prevailing scattering effect and therefore can be considered a quasi-inherent optical property. At longer wavelengths (>510 nm), Kd shows a strong dependence on the solar zenith angle. As depth increases, inelastic scattering plays a greater role for the underwater light field at red wavelengths.     

Novel circular-beam equalizing techniques that use graded-index fiber optics for a high-power laser diode

We demonstrate a novel method of equalizing a laser diode (LD) beam into a circular beam. This method uses the twist effect of graded index (GI) fiber optics. An asymmetric LD beam with beam qualities of M2 = 500 in the slow axis and M2 = 4 in the fast axis is converted successfully into a symmetric circular beam with a beam quality of M2 = 175. The circular-output beam with 92% coupling efficiency from the fiber input to the fiber output is obtained with a 5-m-long GI1200 (1200 means a core diameter of 1200 microm) fiber for a 2-W LD array. We extend the experiments to a higher-power source with higher asymmetric beam qualities of M2 = 3000 and M2 = 4. By slightly bending the GI10000 (10000 means a core diameter of 10,000 microm) fiber, we have succeeded in generating a symmetric beam with a improved beam quality of M2 = 2000. The average beam quality is preserved when the asymmetric ratio is not high, and the beam quality degradation ratio is investigated up to asymmetric ratios of 750.     

Determination of the refractive index and thickness of holographic silver halide materials by use of polarized reflectances

A method to determine the refractive index and thickness of silver halide emulsions used in holography is presented. The emulsions are in the form of a layer of film deposited on a thick glass plate. The experimental reflectances of p-polarized light are measured as a function of the incident angles, and the values of refractive index, thickness, and extinction coefficient of the emulsion are obtained by using the theoretical equation for reflectance. As examples, five commercial holographic silver halide emulsions are analyzed. The procedure to obtain the measurements and the numerical analysis of the experimental data are simple, and agreement of the calculated reflectances, by use of the thickness and refractive index obtained, with the measured reflectances is satisfactory.     

Absorption and scattering images of heterogeneous scattering media can be simultaneously reconstructed by use of dc data

We present a carefully designed phantom experimental study aimed to provide solid evidence that both absorption and scattering images of heterogeneous scattering media can be reconstructed independently from dc data. We also study the important absorption-scattering cross-talk issue. In this regard, we develop a simple normalizing scheme that is incorporated into our nonlinear finite-element-based reconstruction algorithm. Our results from the controlled phantom experiments show that the cross talk of an absorption object appearing in scattering images can be eliminated and that the cross talk of a scattering object appearing in absorption images can be reduced considerably. In addition, these carefully designed phantom experiments clearly suggest that both absorption and scattering images can be simultaneously recovered and quantitatively separated in highly scattering media by use of dc measurements. Finally, we discuss our results in light of recent theoretical findings on nonuniqueness for dc image reconstruction.     

Disturbance-free high-speed sinusoidal phase-modulating laser diode interferometer

A surface profiler that incorporates a feedback controller to eliminate external disturbances is proposed and demonstrated. Its overall performance is dependent on the frequency response of the feedback loop. The frequency of the modulating signal strongly influences the response of the feedback controller. When we used the integrating-bucket method, the CCD camera had to be operated at a low-frequency video rate. Our technique uses a CCD camera equipped with an electronic shutter. The shutter function enables us to apply high-speed sinusoidal phase modulation to the conventional integrating-bucket method under the standard video rate.