Study of ways of reducing energy consumption in a ventilation system

Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 88–98, November–December, 1996.     

Rapid detection cytomegalovirus pneumonia in recipients of bone marrow transplant: evaluation and comparison of five survey methods for bronchoalveolar lavage fluid

To detect cytomegalovirus-associated interstitial pneumonia (CMV-IP) in recipients of BMT in its earliest stage, five CMV methods were assessed for their usefulness using bronchoalveolar lavage fluid as the test specimen. Of the 43 cases enrolled in the study, PCR was positive in 12 cases, shell vial in eight, culture in eight and cytology in three. There were no positive cases in in situ hybridization. Based on this result, the 43 cases were classified into four groups: Group 1, three cases: positive in PCR, shell vial and cytology; Group 2, five cases: positive in PCR and shell vial; Group 3, four cases: positive only in PCR; and Group 4, 31 cases: negative in all CMV tests. Cases in Group 1 were judged as having the highest risk of overt CMV-IP. They were successfully treated with a combination of ganciclovir and immunoglobulin. Group 2 was diagnosed as having active CMV infection and ganciclovir monotherapy was effective for these patients. Groups 3 and 4 were not given anti-CMV therapy, but they were free from CMV-related manifestations throughout the study. The sensitivity and specificity of each survey method for the detection of Groups 1 and 2 were 1.0 and 0.89 in PCR, 1.0 and 1.0 in shell vial, 0.88 and 1.0 in culture, and 0.38 and 1.0 in cytology. Similarly, the positive and negative predictive values were 0.67 and 1.0 in PCR, 1.0 and 1.0 in shell vial, 1.0 and 0.97 in culture, and 1.0 and 0.88 in cytology. Thus, CMV survey on bronchoalveolar fluid was thought to be useful in detecting post BMT CMV-IP in its earliest stage.     

Fuzzy logic switching of thyristor controlled braking resistorconsidering coordination with SVC

This paper presents a new switching control scheme for braking resistors (BR) using fuzzy logic to enhance overall stability of electric power systems. In addition, the coordination with an SVC is also considered to achieve a wider stable region. The braking resistor is set on one of the generator busbars, where the real power output from the generator is measured to determine the firing-angle of the thyristor switch. The switching control scheme is simple so as not to require heavy computation on the microcomputer based switching controller. An SVC is set on one of the busbars in the system. The switching of the SVC uses a similar fuzzy logic control scheme to the one for the BR. Simulation results show the effectiveness of the proposed fuzzy logic switching control scheme     

Accurate determination of magnetic field gradients from four pointvector measurements. I. Use of natural constraints on vector dataobtained from a single spinning spacecraft

Cluster introduces a new generation of spacecraft that will measure the spatial gradients of the magnetic field in the Earth's magnetosphere. As gradients require knowledge of differences, small errors resulting from an inadequate knowledge of the orientations, zero levels and the scale factors of the magnetometer sensors affect the calculation of field gradients disproportionately and must be removed with high accuracy. We show that twelve calibration parameters are required for each of the spacecraft (for a total of 48 for the four spacecraft) to correctly infer the measured magnetic fields at each of the spacecraft. By application of a Fourier transform technique, some of the parameters can be recovered. We show that errors in eight of the twelve calibration parameters generate coherent monochromatic signals at the first and the second harmonics of the spin frequency in the despun data. We relate the real and the imaginary parts of the monochromatic signals to the eight calibration parameters. We then present a least squares scheme that improves the eight calibration parameters by iteration until the power of the coherent signal superimposed above the broad-band background is minimized     

Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (111), Si (100) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disorder in the AIN films increased as determined by X-ray diffraction, FTIR and Raman spectroscopy. The preferred orientation of the film's c-axis changed from completely normal to the film at 100 V, to a mixture of normal and in the plane of the film at 200 V. For AIN films deposited under the same conditions, the films were more highly oriented on sapphire (0001) than in Si (111). The hardness of the films increased from 18.2 to 23.7 GPa with the nitrogen-beam voltage, and possible reasons for this change in hardness are considered.     

Measurements ofPVTx properties of refrigerant mixture HFC-32+HFC-125 in the gaseous phase

The experimental 156PVTx properties of an important binary refrigerant mixture, HFC-32 (difluoromethane)+HFC-125 (pentafluorethane), have been measured for three compositions, i.e., 50, 60, and 80 wt% HFC-32, by a constant-mass-method coupled with expansion procedure in an extensive range of temperaturesT from 320 to 440 K, of pressuresP from 1.8 to 5.3 M Pa, and of densities p from 50 to 124 kg · m^–3. The experimental uncertainties of the present measurements are estimated to be within ±7 mK in temperature, ±2 kPa in pressure, ±0.2% in density and ±0.02 wt% of HFC-32. The sample purities are 99.998 wt% for HFC-32 and 99.99 wt% for HFC-125. Seventy-eight second and third virial coeflicients for temperatures from 320 to 440 K have been determined by the present measurements.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Micromachined piezoelectric force sensors based on PZT thin films

A micromachined lead zirconate titanate (PZT) force sensor for scanning force microscope (SFM) is conceptualized by its piezoelectricity. The fabrication procedure is interpreted, and mechanical characteristics of the micromachined PZT force sensors with various lengths are studied in this paper. A compact SFM is constructed by using the piezoelectric PZT sensor. A very clear image is taken by this SFM. The current study of the micromachined PZT force sensor can be considered as a breakthrough of design of SFM as well as a good example of integrated piezoelectric microdevices     

Erbium-doped silicon and porous silicon for optoelectronics

Silicon forms the backbone of the microelectronics industry, and possibly, of the optoelectronics industry, hitherto dominated by III/V materials. One of the remaining goals is to build an optical source in silicon. Erbium exhibits luminescent 1.54 μm intra-4f transitions in both silicon and porous silicon. This paper reviews the work which has been carried out in this field and discusses some possible additional applications of erbium-doped silicon in optoelectronics, such as a novel on-chip temperature sensor.     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described