Vector characterization of photodetectors, photoreceivers, andoptical pulse sources by time-domain pulse response measurements

Deconvolution of measurement system effects from pulse response measurements is demonstrated to yield reproducible, accurate characterization of the impulse response (and vector frequency response) of a photodetector or photoreceiver, as well as the intensity waveform of an optical pulse. Calibration is based on a <3-ps FWHM (full width at half maximum) optical pulse and a 50-GHz 3-dB bandwidth electrical sampling system. Vector characterization of a photodetector/photoreceiver to >40 GHz and an optical pulse source to >30 GHz are demonstrated. Calibration and effects of noise are discussed     

On the performance advantage of multitaper spectral analysis

The performance advantage of multitaper spectral analysis is quantified relative to weighted overlapped segment averaging (WOSA). To make the comparison of these two nonparametric spectral estimators, theoretical performance measures are derived in terms of leakage, variance, and resolution. The methods are then compared by evaluating each measure in turn, while requiring the other two measures to be equal. The results show that multitaper analysis always performs better than WOSA. For example, given the same leakage and resolution, multitaper analysis can have three-quarters to one-half the variance of WOSA. Given the same resolution and variance, multitaper analysis can exhibit a 10-20-dB leakage advantage over WOSA. These and other results provide compelling evidence for greater use of multitaper analysis in situations for which a nonparametric spectral estimator is appropriate     

Excited-state-absorption cross sections and amplifier modeling inthe 1300-nm region for Nd-doped glasses

The performance of Nd³⁺-doped fibre amplifiers is limited by strong excited-state absorption (ESA) of the signal, and, even for fluorozirconate glasses, ESA prevents the important region below 1320 nm from being used. To quantify this limitation and explore alternative host materials, ESA and stimulated-emission cross sections have been measured for a representative group of glass compositions. These parameters have been used in an accurate fiber-amplifier model to provide the first quantitative comparisons of performance for Nd³⁺ -doped glasses in the 1300-nm band as a function of host     

Stabilization of high-impact polystyrene/ polyethylene blends

Commercial poly(styrene-b-butadiene) copolymers (SBS) can act as effective compatibilizers in blends between high-impact polystyrene (HIPS) and polyethylene (PE), allowing a fine dispersion of PE in the polystyrene matrix, with a good balance of stiffness and impact strength. However, when processed under more severe conditions (e.g. in multiple extrusions, which simulate customer's product scrap recovery), the above blends show rather poor stability and their useful properties are rapidly lost. That undesirable effect is mainly due to cross-linking of SBS, which thus looses its compatibilizing activity. A correlation has been found between the time-to-cross-linking of SBS rubber in a Brabender mixer and the rapid decay of mechanical properties. The analysis of the mixing process and the morphology examinations of the final blend sample by TEM seem to support the above hypothesis. A significant reduction of block copolymer degradation has been achieved by means of a suitable stabilization.     

Approximate methods of identifying dynamic systems

Translated from Izmeritel'naya Tekhnika, No. 7, pp. 8–9, July, 1992.     

Characteristics of a far-infrared molecular laser optically pumped by a high-power CO2 laser

A molecular far-infrared (FIR) laser optically pumped by a high-power CO₂ laser, which is a powerful source for testing detectors and mixers and for FIR spectroscopy, is constructed and the performance is examined through experiments. At frequencies between 580GHz and 4.25THz, FIR output power is more than 20～30m W by pumping power of 35～81W. Amplitude stability of ±3% is obtained at 100m W output at 2.52THz for over 30 minutes when the FIR tube is cooled at 5°C by a chiller. As an application to testing mixers, FIR laser lines up to 4.25 THz are detected by Schottky barrier diodes (SBD). Further, using a SBD, performance of absolute frequency stability at 693GHz of HCOOH oscillation is measured by harmonic mixing with a 115.5GHz millimeter wave from a phase-locked Gunn oscillator. The resultant center-frequency stability is 100kHz per 10 minutes.     

An alternative approach to weight function evaluation for an orthotropic crack

The use of the analytically decoupled near-tip displacement solutions as an alternative approach, is presented in this paper for the efficient finite element evaluation of the decoupled weight functions for an orthotropic 2-D crack. This alternative approach has been validated by directly comparing the prior weight function results with a symmetric mesh approach in the crack-tip neighborhood, and indirectly by comparing the calculated stress intensity factors (K_I(II)) values using the computed weight functions with available K_I(II) solutions of the 2-D mixed mode orthotropic cracks. In addition, this approach with analytically decoupled near-tip displacement solutions for calculating weight functions at all locations, can facilitate further extension of weight function evaluations to a more general 2-D anisotropic crack.     

Parallel simulated annealing for power system decomposition

This paper proposes a parallel optimization approach to power system decomposition for voltage control. In this paper, a parallel simulated annealing (PSA) technique is developed to decompose power systems so that subsystems are equally separated in terms of the number of nodes and control variables. System decomposition is one of difficult discrete number combinatorial problems. The PSA technique provides better solutions than the conventional SA because of searching a solution near a global minimum over a wide range. The proposed method is tested in IEEE 30, 57, and 118 node systems     

Laparoscopic distal resection of the pancreas with the preservation of the spleen

Management of the pancreatic diseases is still a challenge to the laparoscopic technique. Some experience has been gained in the laparoscopic exploration of the pancreas and staging in cancer. Anatomically the accessibility of the distal pancreas provides the laparoscopic approach technically feasible. Patient and method: A case of insuloma in the tail of the pancreas is presented, where distal pancreatic resection was performed laparoscopically with the preservation of the spleen. In a 55 years old female patient with typical clinical symptoms of hyperinsulinism CT identified a 3 cm large solid tumor in the tail of the pancreas. Complete mobilization of the distal pancreas was enhanced by the use of an ultrasonic dissector (UltraCision). The pancreas is detached from the splenic hilum after dividing the spleen vessels. The pancreas is transected proximally by laparoscopic linear stapler. Preservation of the short gastric vessels provides the necessary blood supply of the spleen following division of the splenic artery and vein. Thus removal of the spleen is not a necessary step in this procedure. The operation was carried out within 4.5 hours. Postoperative course was uneventful, the patient left the hospital on the 5th postoperative day. Advantages of the procedure were the earlier mobilization and shorter recovery time, less postoperative pain. The procedure can be safely performed with a good experience in both pancreatic and laparoscopic surgery.