Castor polyols for urethane foams

Summary A systematic investigation of some 21 castor polyols as base materials for preparing urethane foams was carried out. Prepolymers were prepared both from individual castor polyols and from mixtures of them with an anhydrous castor oil. Foams formed from these prepolymers were checked for shrinkage on cure, density, and modulus. From the wide range of results obtained it is evident that castor polyols can serve as effective urethane components. Aside from serving as major polyols for reaction with di-isocyanates, they can also be used as modifying polyols a) to speed up prepolymer preparation, b) to adjust prepolymer viscosity to any required degree, c) to minimize loss of modulus on humid aging, and as cross-linking centers with negligible loss of foam modulus. Details covering the preparation of a nonshrinking, semi-rigid, light-weight urethane foam based on an 85% anhydrous castor oil/15% epoxidized castor oil mix are outlined in the article. Presented at the Spring Meeting, American Oil Chemists' Society, Memphis, Tenn., April 20–23, 1958.     

Ultramicroscopy of association colloids formed from block copolymers

Ultramicroscopy studies have been made of micelle formation by two poly(styrene)-poly(isoprene) block copolymers in organic solvents (N,N-dimethylacetamide and n-decane respectively) and a poly(l-glutamic acid)-poly(l-leucine) block copolymer in an aqueous solution of 0.2M NaCl at pH = 4.0. The technique provides a method of determining the number-average translational diffusion coefficient) $\text{D}\text{?}{}_{\mathrm{n}}$, of association colloids and leads, via the Stokes-Einstein relation, to a measure of the number-average of the reciprocal hydrodynamic radius $\text{(R}{}_{\mathrm{<mtext>D</mtext><mtext>?</mtext>}}{}^1\text{)}{}_{\mathrm{n}}$ for spherical particles. Particles having a radius less than approximately 30 nm were too small to be detected by the technique.The ultramicroscopy results were compared with data obtained by laser light scattering photon correlation spectroscopy which provides a measure of the z-average translational diffusion coefficient. $\text{D}\text{?}{}_{\mathrm{z}}$. An additional comparison was made by carrying out measurements on two well-characterized poly(styrene/divinyl benzene) latices.     

Polymer translational diffusion: 2. Non-theta solutions,polystyrene in butan-2-one

The diffusion of linear polystyrene under non-theta conditions in butan-2-one has been studied by Rayleigh light scattered linewidth measurements for the molecular weight range of 2.08 × 10⁶ to 8.7 × 10⁶ and as a function of concentration. By extrapolation of diffusion coefficient values to zero concentration we find that $\text{D}{}_0\text{= 5.5 × 10}{}^{\mathrm{?4}}\text{M}\text{?}{}^{\mathrm{?0.561}}{}_{\mathrm{w}}\text{cm}{}^2\text{s}{}^{\mathrm{?1}}$. The first order concentration dependence $\text{k}{}_{\mathrm{<mtext>d</mtext>}}\text{c}$ changes sign as the molecular weight increases, $\text{k}{}_{\mathrm{<mtext>d</mtext>}}$ being fairly small and negative at low molecular weights and increasingly positive above $\text{M}\text{?}{}_{\mathrm{w}}\text{?230 000}$.     

Transient behaviour of encapsulated enzyme reactor systems

Mathematical models are developed for the transient behaviour of encapsulated enzyme reactor systems such as the continuous stirred tank reactor (CSTR) and the packed bed tubular reactor. The rate processes taking place in the encapsulated enzyme bed are approximated by using a combined rate control model of enzyme reaction and membrane diffusion. The change in transient substrate concentration is obtained by using the developed rate expression in the material balance over the substrate as a function of time for the CSTR and as a function of time and position for the packed bed tubular reactor. The effects of various parameters such as the enzymic reaction rate constant, Michaelis constant, diffusional resistance of membranes, and Peclet number on the substrate concentration distribution, which varies with respect to operating time, are investigated. This study affords insight into the transient operating characteristics of the encapsulated enzyme reactor system. The results should be useful in understanding the start-up performance of the reactor systems and to control such reactor systems at desired operating conditions.     

Electrochemical capacitance characterization of n-type gallium arsenide

The depletion layer capacitance of n-type gallium arsenide was measured as a function of its anodic potential in an electrochemical cell. It was shown that these measurements can lead to accurate values of carrier concentration, and are compatible with stripping by electrochemical dissolution, provided that surface area is preserved. The experimental conditions required to maintain the electrolyte-semiconductor contact area constant, are described. Also, it is shown that excursions into regions outside those specified lead to significant enhancement of capacity (via real area increase). Under these conditions the carrier concentration can no longer be obtained but much can be learnt about the internal structure of the material.     

Reprint of “Suppressing propylene carbonate decomposition by coating graphite electrode foil with silver”

A method has been developed to suppress the decomposition of propylene carbonate (PC) by coating graphite electrode foil with a layer of silver. Results from electrochemical impedance measurements show that the Ag-coated graphite electrode presents lower charge transfer resistance and faster diffusion of lithium ions in comparison with the virginal one. Cyclic voltammograms and discharge-charge measurements suggest that the decomposition of propylene carbonate and co-intercalation of solvated lithium ions are prevented, and lithium ions can reversibly intercalate into and deintercalate from the Ag-coated graphite electrode. These results indicate that Ag-coating is a good way to improve the electrochemical performance of graphitic carbon in PC-based electrolyte solutions.     

Determination of fatty acid composition by gas chromatography: II. Analysis with use of flame ionization detector

In this study known mixtures of four or five fatty acid methyl esters were analyzed collaboratively by gas chromatography with flame ionization detectors. The experimental data was treated statistically to examine inter- and intralaboratory scattering. More-over the effect of the use of correction factors was investigated. Even if only the specific analytical values that scattered a little were chosen, the averages of such values did not always approach the actual values. In some laboratories a sort of regularity was observed in the deviation of analytical values from real values throughout the analyses of four samples. The application of correction factors to the analytical values obtained by these laboratories resulted in a considerable decrease of interlaboratory scattering and deviation from the real values. When a constant amount of sample was injected, intralaboratory scattering was decreased, whereas interlaboratory scattering was not. Injection of large sample sizes caused deviation. From this collaborative study it was recommended that 0.5–1.0 μl of 20% solution be injected. Presented at the JOCS-AOCS Joint Meeting, Los Angeles, April 1972.     

Sintering behaviour of La1−xSrxFeO3−δ mixed conductors

The sintering properties of La_1−xSr_xFeO_3−δ (x = 0.1, 0.25) mixed conductors have been investigated with particular emphasis on the effect of secondary phases due to cation non-stoichiometry (±5 mol% La excess and deficiency). Secondary phases, located at grain boundaries in cation non-stoichiometric materials, increased the sintering temperature compared to single-phase materials. Extensive swelling in final stage of sintering was observed in all materials, which resulted in micro-porous materials. The swelling was most pronounced in the phase pure and two-phase materials due to La-deficiency, while refractory secondary phases in La-excess materials inhibited both sintering, grain growth and swelling. In La-deficient materials, formation of molten secondary phases resulted in rapid swelling due to viscous flow. The present findings demonstrated the importance of controlling sintering temperature and time, as well as careful control of the cation stoichiometry of La_1−xSr_xFeO_3−δ in order to achieve fully dense and homogenous La_1−xSr_xFeO_3−δ ceramics.     

Properties and structure of welded joints of high-strength steel after zonal heat treatment by electron beam

Conclusion Zonal electron-beam heat treatment in vacuum of welded joints of high-strength steel, produced by electron-beam welding, brings about a troostomartensitic and a martensitic-sorbitic structure in the welded joint and equalization of the properties over the section of the welded joint: impact toughness of the welding seam and of the weld-affected zone is practically the same, viz., 30 J/m².Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 7–8, March, 1991.