A novel multi-electrode system for electrolytic and biological water treatments: electric charge transfer and application to denitrification

A novel multi-electrode system is proposed for electrolytic and biological water treatments. The multi-electrode system is comprised of multiple working electrodes and their counter electrode, where electric current or potential applied to each electrode is controlled independently. Experimental result for different electrolyte solutions showed that electric charge in the system was efficiently carried by dissociative electrolytes such as carbonate ions. This transfer mechanism is regarded as being effective both in keeping pH level around neutrality and in passing certain amounts of electric current especially in dilute solutions such as groundwater and surface water. A long-term (over 500 days) experiment also showed the enhanced and stable denitrification performance of biofilm-electrode reactor (BER) equipped with the multi-electrode system, comparing to former BERs. This superior performance was thought to be attributable to large effective surface area of electrode, the charge transfer mechanism by dissociative electrolyte, and the formation of highly reducing (or oxidizing) zones. From these results, we conclude that the multi-electrode system is useful for electrolytic and biological treatments of groundwater and surface water.     

Particle-size distribution and phosphorus levels in soil, sediment, and urban dust and dirt samples from the Menomonee River Watershed, Wisconsin, U.S.A.

Soil, bottom sediment, suspended sediment, and urban street dust and dirt samples from the Menomonee River Watershed, Wisconsin, were dispersed by ultrasound, fractionated and analyzed for the P content of each of three particle-size fractions. The major soil types in the watershed were used as a reference for comparing particle-size distribution and P content in urban street dust and dirt, and in sediments.Phosphorus level was found to be greater in the clay-sized particles than in the sand- or silt-sized particles of urban street dust and dirt samples, but 48% of the P was in the sand-sized fraction because of the predominance of sand-sized particles in these samples. The highest P level in the clay-sized fraction of the bottom sediments occurred at the site below a sanitary treatment plant (STP) outfall with secondary treatment capability. The P level found below a tertiary STP outfall was equal to the level found in agricultural areas. When using P level in sediment for locating areas of possible P input to the river, the clay-sized fraction of bottom sediments was more precise than P levels in unfractionated samples.     

Eating to your hearts delight

Food and knowledge of food is an essential part of life. Knowledge about how to get enough and how to get it right is an essential part of all cultures. Since food is vital, nutrition policy is critical. Nutrition policy is about who should eat what, why, when and how in order to promote better health. This article deals with the politics of nutrition, which is about who eats what, why, when, how, and with what impact on their lives. For food, whether it is scarce or abundant, affects people unequally, hence food has always been a social concern. Regulating its supply has been a source of civilization. The state of nutrition is one of the most potent indicators of the state of society. Hence, food is also one of the oldest objects of politics--indeed, one cannot think of politics without it. This is the first issue I will address: by offering a capsule history of humanity from the perspective of the politics of nutrition. Next, I will address, in a similarly compressed history, the development of the science of nutrition, as nutrition policy has become based on research--particularly on medical science. Finally, I will address nutrition policy as a subpart of the politics of nutrition--how it has been defined and how it has developed, its changing agendas and current concerns.     

A framework for rapid local area modeling for construction automation

Rapid 3D positioning and modeling in construction can be used to more effectively plan, visualize, and communicate operations before execution. It can also help to optimize equipment operations, significantly improve safety, and enhance a remote operator's spatial perception of the workspace. A new framework for rapid local area sensing and 3D modeling for better planning and control of construction equipment operation is described and demonstrated. By combining human-assisted graphical workspace modeling with pre-stored Computer-Aided Design (CAD) models and simple sensors (such as single-axis laser rangefinders and remote video cameras), modeling time can be significantly reduced while potentially increasing modeling accuracy.     

The use of roughness to produce high reynolds number flows around circular cylinders at lower reynolds numbers

It has long been stated that the pressure distribution around a circular cylinder at high values of Reynolds number can be reproduced at lower values of Reynolds number by a suitable roughening of the surface of the cylinder. This paper shows that this is indeed possible and explains the problems.     

ASSESSING AND MANAGING THE RISKS OF PATHOGEN TRANSFER FROM LIVESTOCK MANURES INTO THE FOOD CHAIN

A review was undertaken of (a) the levels and prevalence of Salmonella spp., Campylobacter spp., Listeria monocytogenes, Escherichia coli 0157. Cryptosporidium parvum and Giardia intestinalis in livestock manure, and (b) factors which affect their survival during storage and following land application. Pathogens are commonly present in livestock manures and can survive in soil for several months or years after spreading or excretion onto land. Temperature was identified as being the most important factor influencing pathogen survival, although pH, UV light and drying were also important. Various practical measures to minimise the risk of pathogen transfer into the food chain were identified, including treatment, extended storage and no/harvest periods following land spreading. Guidelines are being developed on managing farm manures to minimise the risks of microbiological contamination of ready-to-eat crops.     

Role of phosphorus in eutrophication and diffuse source control

Many lakes and some streams and estuaries are showing signs of excessive fertilization due to the input of aquatic plant nutrients from man-associated sources. The key element often found limiting aquatic plant populations is phosphorus. The attempt to control phosphorus input to natural waters as the overall approach for controlling excessive fertilization is technically sound and economically feasible for many natural waters. However, a much better understanding of the relationship between the phosphorus input to a lake and the excessive growths of aquatic plants within the lake must be developed. This development will require a combined biological and chemical approach toward assessing the role of phosphorus in eutrophication for a specific water body. The biological approach will use tissue content, enzymatic and kinetic uptake analysis of phosphorus limitations as well as bioassays of phosphorus availability in order to determine the limiting nutrient for a body of water. The chemical aaproach will utilize amounts of each of the forms of phosphorus present in the lake and the rates of interchange of phosphorus between these various forms.There will be some waters where control of phosphorus from treatment of domestic waste water input and removal of phosphorus from detergents will not result in significant improvement in water quality. This is because these waters derive their phosphorus from diffuse sources, such as urban and rural stormwater drainage, the atmosphere, and ground waters. In these instances, it may be necessary to initiate in-lake control of phosphorus by the addition of alum or iron salts.     

Use of driven piles in rammed holes during construction in soils prone to slump-type settlement

Conclusions The experiment with the use of piles cast in rammed holes in lieu of continuous foundations placed on a bed compacted by tamping produced positive results and will be expanded upon further, since the strength properties of the materials in the foundations and the soils in the foundation beds can be more fully utilized, the reliability of the structure increased, the volume of earthwork reduced, labor and material outlays diminished, and the rate of construction and the level of the industrial nature of the work increased.State Institute for the Projection of the Greenhouse Industry. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, p. 10, March–April, 1977.     

Finite element modelling of plate girders with web openings

This paper is concerned with a finite element model to predict the behaviour and ultimate load of plate girders with web openings. The finite element package is used to model the plate girders with web openings. Accuracy of the model is assessed by applying it to plate girders tested earlier by other researchers. Comparison of analytical results with the available experimental results for yielding patterns, ultimate load values and load–deflection relationships show good agreement between the finite element and experimental results thus validating the accuracy of the proposed model. The proposed finite element method was extended to carry out a parametric study. The study covered parameters such as web slenderness and flange stiffness.