The structure of acetylene flames for diamond synthesis

An acetylene flame was photographed with an SIT camera through optical filters, and the signals were Abel transformed to obtain two-dimensional emission-intensity profiles. It was found that the intensive emissions of CH* and C*₂ are localized at the feather boundary, while the OH* emission is localized at the intermediate zone. The structure of the acetylene flame was made clear: it consists of a carbon-radical-rich feather and an oxygen-radical-rich intermediate zone. The carbon-radical concentrations are approximately in equilibrium near the burner exit while they decrease almost linearly via interdiffusion and reactions with the oxygen-radicals in the intermediate zone.Numerical simulations including detailed gaseous and surface reactions reproduced well previous preliminary calculations showing that CH₄ is rapidly produced in the boundary layer near the substrate followed by an increase in CH₃. This result satisfactorily explains the measured dependence of growth rate on the substrate temperature and ratio.     

A review of the unique features of HDL apoproteins

The human plasma high density lipoproteins (HDL) are a heterogeneous ensemble of five proteins associated with both neutral and polar lipids. The sequences of all five proteins are known. ApoA-I and apoA-II are the major protein components; apoC-I, apoC-II and apoC-III are the minor protein components. All these apoproteins spontaneously recombine with phospholipids to give stable lipid-protein complexes and freely exchange between the two major HDL subclasses, HDL₂ and HDL₃. In addition, ApoC-I, apoC-II, and apoC-III exchange between HDL and very low density lipoproteins. Furthermore, certain HDL apoproteins are activators for plasma enzymes that are important in lipid metabolism. ApoA-I and apoC-I activate lecithin/cholesterol acyltransferase; apoC-II is an activator of lipoprotein lipase. The regions of apoC-I and apoC-II that are involved in the activation of these enzymes have been localized with synthetic peptides. Studies of synthetic and native fragments of apoA-II, apoC-I, apoC-II, and apoC-III as well as model lipid-binding peptides have identified specific regions with structural features common to lipid-binding proteins. These special properties, which include helical potential, sequences with a critical amphipathic length, and high hydrophobicity of the nonpolar side of the amphipathic helix, are the determinants of HDL structure and metabolism.     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.     

Microstructure and its relationship to deformation processes in amorphous polymer glasses

The microdeformation morphology of a number of vinyl polymers with bulky side chains (type I) and arylene polymers with flexible oxygen linkages (type II) was studied by electron microscopy. The polyarylenes crazed only near the glass transition while the polyvinyls exhibited a crazing regime that extended to liquid nitrogen temperatures. In addition significantly less plastic strain was localized in type II glass crazes relative to those in type I glasses. In compatible blends of polystyrene (PS) and 2,6-dimethyl poly(phenylene oxide) (2MPPO), ca. 30% 2MPPO was sufficient to induce a transition from type I to type II crazing behavior. Small amounts of PS suppressed the low-temperature 2MPPO β relaxation but enhanced the intermediate transition of 2MPPO at higher temperatures. Blending increased the conformational energy of the 2MPPO chain and improved interchain packing. The propensity for the polymer glass to form sharp shear bands at the expense of diffuse bands was increased by a decrease in the conformation energy of the polymer chain and an improvement in the glassy state packing.     

Characterisation of the neutral oil from a low-temperature coal tar

Tar resulting from fluidised-bed, low-temperature carbonisation of coal was treated to yield a neutral oil from which a series of six other samples was extracted. These were examined by proton magnetic resonance (p.m.r.) spectroscopy, low-ionising-voltage (11 eV) mass spectroscopy (m.s.), gel chromatography followed by fluorescent indicator analysis, and cryoscopy. Aliphatic fractions separated chromatographically were also examined by infra-red spectroscopy. Distributions of hydrogen between chemical types were found for the several fractions from 60 MHz p.m.r. spectra and presented in terms of average structural parameters. M.s. analysis indicated negligible cracking of paraffin components, and the average molecular weight of 197 agreed well with cryoscopic determinations. For the carbon ratio, f_a, between aromatic and total, agreement between m.s. and p.m.r. depends on the p.m.r. structural analysis scheme adopted. P.m.r. and m.s. structural analyses of the aromatics emphasise the predominance of di- and tri-nuclears, with about 40% of available sites substituted, and the importance of acenes in lowtemperature carbonisation material. Gas and gel chromatography showed urea-adductable paraffins to be largely straight-chain C₁₀-C₂₆, much as for tars from carbonisation at higher temperature.     

Function of sulfur dioxide in the kinetic mechanism of oxidation of carbon

Retardation of the gasification reaction of carbon with oxygen by SO₂ was observed. Rates of oxidation were determined by thermal gravimetric analysis (TGA) of a nuclear graphite in the temperature range of 550–700°C, and of a coconut charcoal in the temperature range of 400–505°C. The oxidant gases were dry air containing 0–6% SO₂. Reduction of the rate by SO₂ varied with burn-off. Differential thermal analysis (DTA) was also applied to detect the retardation effect of SO₂. The technique of infrared internal reflection spectroscopy (IRS) was used to examine the surface species of reacted charcoal samples. Absorption bands were assigned to surface carbonyls, lactones, and a chemisorbed SO₂ in the form of sulfate. Chemisorption of SO₂ was attributed to cause the retardation of the oxidation reaction.     

Oxide ion conduction in the sintered oxides of MoO3-doped Bi2O3

In order to examine the conduction behaviour in the sintered oxides of MoO₃-doped Bi₂O₃, the electrical conductivity in air and the EMF of oxygen gas concentration cell were measured with respect to the phase relation determined by X-ray diffraction.The tetragonal single phase oxide containing 22 mol% MoO₃ was found to be a high oxide ion conductor, the conductivity of which was comparable to those of stabilized zirconias. The partial electronic conduction in this phase was negligibly small at relatively high oxygen pressure. The oxide ion conduction was considered to be attributable to an appreciable amount of oxygen vacancies present in the crystal. In the monoclinic compound 3Bi₂O₃·2MoO₃, the oxide ion conduction was also observed. Although the conductivity of this phase was somewhat lower than that of the tetragonal phase, the activation energy for conduction (53·5 kJ mol^–1) was much lower than the values for usual oxide ion conductors.     

Softening phenomenon by remilling of styrene–butadiene copolymer rubber–general-purpose polystyrene resin blend

The softening phenomenon by remilling of uncured blends of various commercia styrene—butadiene copolymer rubber (styrene content, 23.5 to 48 wt-%, styrene block 0 to 18 wt-%) with general-purpose polystyrene resin was mainly studied by examining the blend ratio dependence of hardness and compression modulus (in logarithmic form), with special attention to the state of dispersion of the polymers. It was found that the blend of styrene—butadiene copolymer rubber with general-purpose polystyrene resin forms a microheterogeneous polymer blend system and that the hardness and the compression modulus change in S-shaped curves versus blend ratio. However, the degree of softening phenomenon by remilling (roll surface temperature, 70°–90°C) was found to be different for the two blend systems, i.e., random styrene—butadiene copolymer rubber and block styrene—butadiene copolymer rubber. The softening phenomenon is more pronounced in random-type rubbers; and in some block-type rubbers, no softening phenomenon was observed. The influence of the styrene content of the polymer is small. Further discussions have shown us that the strong interaction between the polystyrene block of the copolymer and the styrene homopolymer of the general-purpose polystyrene resin controls the state of dispersion of polymers thereby causing this difference in the softening phenomena among the different kinds of styrene—butadiene copolymer rubbers.     

High temperature swelling of coal/tetralin mixtures in a high pressure microdilatometer

High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min^{− 1} under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments.     

Origin of Grain-Boundary Diffusion in MgO

Preferential diffusion of Ni²⁺ and Co²⁺ along grain boundaries was observed in certain bicrystals of MgO. This enhancement is attributed to impurity segregation at the boundary. The identified impurities responsible for the effect are the principal impurities in the single-crystal MgO: Ca, Si, and Fe. No enhancement was observed in any bicrystal prepared above 1300°C, a temperature similar to that at which studies of the mechanical properties of MgO have implied a reabsorption of impurity precipitates into solid solution. It is concluded that enhanced grain-boundary diffusion of cations in MgO is an extrinsic, rather than an intrinsic, property of the boundary.