Biofilm adaptation to sulfate reduction in anaerobic immobilized biomass reactors sujected to different COD/sulfate ratios.

Various aspects of biofilm adaptation to sulfate reduction in horizontal-flow anaerobic immobilized biomass (HAIB) reactors subjected to increasing sulfate concentrations and different COD/sulfate ratios are presented and discussed. Four bench-scale HAIB reactors filled with vegetal carbon (R1 and R2) and polyurethane foam matrices (R3 and R4) were utilized. Influent sulfate concentrations ranging from 500 to 3000 mg/L were applied at COD/sulfate ratios ranging from 5.0 to 1.7. Reactors R1 and R4 were operated with higher sulfate loads than those applied to R2 and R3. For the same COD/sulfate ratio, the highest sulfate reduction efficiency (approximately 80%) was displayed by the vegetal carbon reactor (R2) subjected to low sulfate loads. According to the results of our molecular biology analyses, the different support materials provided different biomass colonization conditions. The lowest diversity of sulfate-reducing bacteria was found in the HAIB filled with polyurethane foam matrices operating with high sulfate loads.     

Sequence‐Specific Molecular Lithography Towards DNA‐Templated Electronics

Recent advances in the realization of individual molecular‐scale devices [1,2] highlight the integration of individual devices into large‐scale functional circuits as the major challenge. DNA‐programmed assembly is a promising avenue in that direction due to the large amount of information that can be coded into the molecules and the ability to translate that information into physical constructs [3]. Large‐scale DNA‐templated electronics require, however, complex manipulation of double‐stranded DNA (dsDNA) molecules, as well as patterning of the electrical properties instilled to them by, e.g., metallization. To that end, sequence‐specific molecular lithography on single DNA molecules has been developed [4]. This was achieved by harnessing the exquisite homologous recombination process of the RecA protein. Sequence‐specific patterning of the metal coating of DNA molecules, localization of arbitrary labeled molecular objects at any desired dsDNA address without prior modifications, and generation of molecularly accurate stable dsDNA‐dsDNA junctions are demonstrated. The information encoded in the DNA molecules directs the lithographic process in analogy to the masks used in conventional microelectronics. The RecA protein provides the assembling capabilities, as well as the resist function.     

A Customized Radiation Sensor for Ionization Collection

The measurement of absorbed doses is fundamental to radiation biology and oncology. A customized parallel plate radiation sensor was designed and fabricated as a precursor to investigating novel materials, such as carbon nanotubes, as a substitute for conventional metallic conducting plates or active volume medium. This sensor contains two thick and large-area electrodes that provide the sensor with a good signal-to-noise ratio. The 6 MV and 15 MV photon beams produced by a Varian Clinac 21 EX medical linear accelerator were used in the experiments. The linear accelerator was calibrated such that 1 monitor unit (MU) produces 1 cGy of dose in water with depth of 5 cm for a calibration geometry of source-to-axis distance equal to 100 cm and 10times10 cm² field size at the point of measurement. Ionization measurements were performed by varying the bias voltages, electrode separations, exposures, and angles of the incident beam to characterize the sensor. Signal saturation characteristics of the sensor with different electrode separations and exposures were investigated. This sensor displayed excellent linear response to exposure up to 600 MU. An analytical modeling using the pencil beam model and simulations based on device configuration were given to explain the results. In oblique incident beam experiments, the prototype sensor showed an accurate response compared to simulation results for a small field size of 1times1 cm². The sensor was tested to be suitable in the study of ionization collection efficiencies for different materials     

Effective sludge solubilization treatment by simultaneous use of ultrasonic and electrochemical processes.

Sludge disintegration treatment by using simultaneously ultrasonic irradiation and electrolysis was investigated experimentally. A lab-scale diaphragm cell irradiated with ultrasound at a constant oscillating frequency of 20 kHz was used as a reactor. The batch experiments were carried out under different conditions of electric outputs of the ultrasonic generator, electric current for the electrolysis and different initial SS concentrations. A simultaneous treatment in the cathodic compartment without any chemical doses considerably facilitated the sludge solubilization, compared to the sonication alone. An increase in the electric current up to 400 mA under a constant ultrasonic density decreased the specific energy by 55% within the experimental range. The specific energy consumption was also reduced when the initial SS concentration increased. In addition, before carrying out the simultaneous treatment, a brief electrolysis was effective for further reduction of the specific energy and the acceleration of soluble COD generation.     

Upgrading of a reliable water supply system at the Kola nuclear power plant for service life extension

Measures taken to develop and put into operation three new exterior channels for emergency process water with two additional 60VTs pumping units, which remain operational even during an earthquake and were installed in the second block pumping station, are described. In addition, the three existing 12NDS horizontal pumping units were used as a basis to develop a third channel for the emergency process water. Above-ground water ducts with thermal insulation and heating systems to prevent freezing during the anticipation state, which is the constant state of the emergency system, were laid. As a result of upgrading with the development of three channels, the emergency process water feeding reached an adequately safe level of reliability. __________ Translated from Atomnaya énergiya, Vol. 100, No. 3, pp. 173–177, March, 2006.     

Statistical model of an undermoded reverberation chamber

Weibull distribution is adopted to model the electric field component of a Reverberation Chamber (RC). Its first property is to include the asymptotic laws, such as Rayleigh and exponential, and its main advantage lies in the fact that the Weibull shape parameter enables a model of the departure from overmoded to undermoded RC regime. Applications are given, such as an RC modal finite element modeling and a Monte Carlo simulation: they prove that the Weibull two-parameter distribution correctly models the quality factor influence. Moreover, the relevance of the use of this extreme value distribution is illustrated.     

Determinants of health knowledge: An investigation of age, gender, abilities, personality, and interests.

Ten areas of health knowledge were investigated in 2 studies, 1 of college students (N=169) and 1 of adults from the community (ages 19-70; N=176). Measures assessed knowledge of aging, orthopedic/ dermatological concerns, common illnesses, childhood/early life, serious illnesses, mental health, nutrition, reproduction, safety, and treatment of illness/disease. Significant gender differences favoring women were found for most areas of health knowledge, especially reproduction and early life. Results showed that cognitive ability accounted for the most variance in health knowledge with nonability (personality and interest traits) and demographic variables accounting for smaller but significant amounts of variance across most knowledge domains. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Linear and nonlinear methods for brain-computer interfaces

At the recent Second International Meeting on Brain-Computer Interfaces (BCIs) held in June 2002 in Rensselaerville, NY, a formal debate was held on the pros and cons of linear and nonlinear methods in BCI research. Specific examples applying EEG data sets to linear and nonlinear methods are given and an overview of the various pros and cons of each approach is summarized. Overall, it was agreed that simplicity is generally best and, therefore, the use of linear methods is recommended wherever possible. It was also agreed that nonlinear methods in some applications can provide better results, particularly with complex and/or other very large data sets.     

Fuel‐Consumption‐Minimum‐Based Selection of the Regime of Heating of a Metal by the Main Optimization Method

Consideration is given to the solution of the problem of minimization of fuel consumption in heating a rectangular prism in a continuous furnace.     

Finite element simulation of the mechanics of flat contact pad fretting fatigue tests

An understanding into the macro kinetic and kinematic behaviour of fretted surfaces is provided. Making use of a modified version of a previously developed in‐house two‐dimensional elastic–plastic finite element analysis numerically simulates flat contact pad fretting fatigue tests. Basic macro mechanics concepts are adopted to idealise two bodies with rough contact surfaces and loaded at two different sites with arbitrary axial loading profiles. A time scale factor is devised to recognise the earliest candidate out of the events possibly accommodated at each loading increment. The present analysis utilises a relevant experimental set up developed in the Structural Integrity Research Institute of the University of Sheffield as an application. Computational results accurate to within 1.2% and corresponding to one contact pad span and six constant normal loads acting individually with four amplitudes of two sinusoidal axial load cycles are presented. The present computations include (1) the development of the global and local normal and tangential reactions and relative sliding displacement acting along the fretting surfaces and (2) contact pad deformation, generated stress fields and plasticity development within the neighbouring region of the fretted area.