Mechanochemical modification of the phase diagrams of hexagonal oxide ferrimagnets

Mechanical activation and fine comminution of hexagonal oxide ferrimagnets by milling to a nanocrystalline state (ultradisperse powder), followed by sintering, leads to significant changes in the phase diagram, the temperature of synthesis, and the magnetic properties as compared to those of the materials obtained by traditional ceramic technology. The final material structure is formed through “chemical assembly”—sequential consolidation of nanodimensional particles (structure-forming blocks)—rather than through the formation of low-temperature phases and their decomposition with increasing temperature.     

Dissolution of U,Np, Pu,and Am Oxides and Their Mixtures in Tributyl Phosphate Saturated with HNO3

It was shown for the first time that weighable amounts of uranium dioxide and its mixtures with Np, Pu, and Am in the form of solid solutions can be efficiently and quantitatively dissolved in the presence of tributyl phosphate saturated with HNO₃. Individual PuO₂ and NpO₂ are not dissolved under these conditions. In treatment of a mechanical mixture of UO₂ with PuO₂ or NpO₂, uranium is completely dissolved, while plutonium and neptunium remain in the precipitate.     

Hybrid finite-element method for discretising cylindrically symmetric parts in electrotechnical models

In many technical devices such as transformers and electrical machines, large differences in geometric dimensions are observed. As a consequence, the generation of a 3D computational grid for the whole device leads to unacceptably large numbers of elements or can even fail. In addition to the commonly applied cartesian or cylindrical symmetries of the overall geometry, the model can be subdivided into parts featuring translational or cylindrical symmetries. Such parts are discretised separately, accounting for the local symmetry, and are then combined with the surrounding 3D model. Excitations and boundary conditions of the submodels are not necessarily symmetric but are expected to be smooth in the direction of the symmetry. Then, the field distribution at the interface is well approximated by a set of spectral elements along the dimension of symmetry. Coupling between the model parts is carried out by means of Lagrange multipliers. A single-phase transformer with thin insulation sheets is taken as an example to illustrate the proposed hybrid discretisation. The cross-section of the cylindrically symmetric part containing thin sheets, is represented by a fine 2D finite-element mesh so that all the geometrical details can be resolved, and the rest of the structure is discretised by a 3D mesh. Nevertheless, a fully 3D field distribution is calculated in all model parts. Only a small number of harmonic functions is needed to account for the azimuthal field variation at the cylindrical interface. Hence, the number of unknowns in the numerical model is reduced significantly, while a high level of accuracy is maintained     

An analysis of the Slapper worm

We can prove that the Slapper is a variation of the Apache Scalper worm by comparing the source code. Modifications introduced in the Slapper worm improved the robustness and efficiency of its predecessor's simplistic P2P networking capabilities. Slapper's author also removed certain features from the original-either because they were redundant or to reduce the perception that it was a tool developed to cause direct harm to networks. Among the features the author removed from the Slapper were capabilities to update itself from a remotely specified Web server (perhaps to prevent someone else from replacing this version with a new one), to attack and infect a host specified with a controlling program, and to send spans. Interestingly, the ability to execute distributed denial-of-service attacks on a controlling user's behalf was kept intact. Slapper's author attempted to make communications with a remote controlling program as stealthy and untraceable as possible by removing several commands to query status and obtain feedback from Slapper nodes.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.     

The effect of the scale of horizontal subsurface flow constructed wetlands on flow and transport parameters.

Horizontal subsurface flow constructed wetlands have proven their efficiency in treating wastewater and removing the pollutants of concern. Treatment efficiency depends on the wastewater residence time, which is a function of the hydraulic loading and the physical conditions of the constructed filter system, which can be described with effective parameters such as: hydraulic conductivity, porosity, dispersivity etc. Because spatial variability is often scale dependent, these effective parameters may be affected by the scale of the system being studied. In this paper the results of tracer experiments in constructed filters using saturated horizontal flow at three scales (small and medium lab scales and full-scale system) using the same filter media is reported. Light-weight aggregate (filter media termed Filtralite-P) was used at all scales. Increasing the scale was associated with increasing dispersivity, meanwhile hydraulic conductivity experienced dramatic reduction and variation by increasing the examined scale. Observed changes in the hydraulic parameters indicate that heterogeneity at different scales should be taken into account when the performance of LWA filters are evaluated from small-scale experiments.     

Thermodesorption of samarium from oxidized tungsten surface

Thermodesorption of samarium (Sm) atoms and samarium oxide (SmO) molecules from samarium films deposited in vacuum onto tungsten substrates covered with thin (<1 nm thick) layers of tungsten oxides has been studied. It is established that samarium reduces tungsten from its oxides. The parameters of Sm and SmO desorption from an oxidized tungsten surface are determined.     

Correlation Between Structural and Optical Properties of Composite Polymer/Fullerene Films for Organic Solar Cells

We investigate thin poly(3‐hexylthiophene‐2,5‐diyl)/[6,6]‐phenyl C₆₁ butyric acid methyl ester (P3HT/PCBM) films, which are widely used as active layers in plastic solar cells. Their structural properties are studied by grazing‐incidence X‐ray diffraction (XRD). The size and the orientation of crystalline P3HT nanodomains within the films are determined. PCBM crystallites are not detected in thin films by XRD. Upon annealing, the P3HT crystallinity increases, leading to an increase in the optical absorption and spectral photocurrent in the low‐photon‐energy region. As a consequence, the efficiency of P3HT/PCBM solar cells is significantly increased. A direct relation between efficiency and P3HT crystallinity is demonstrated.     

Computational materials: Multi-scale modeling and simulation of nanostructured materials

The paper provides details on the current approach to multi-scale modeling and simulation of advanced materials for structural applications. Examples are given that illustrate the suggested approaches to predicting the behavior and influencing the design of nanostructured materials such as high-performance polymers, composites, and nanotube-reinforced polymers. Primary simulation and measurement methods applicable to multi-scale modeling are outlined. Key challenges including verification and validation are highlighted and discussed.