Double-layer nonswirl nozzles for continuous casting machine pony ladles

Conclusions A method for chamotte nozzles with protection of the bore with a zirconia concentratebase layer has been developed. The life of the nozzles with the protective layer is at least as good as the zirconia-graphite ones. It is desirable to use the double-layer nozzles in place of zirconia and zirconia-graphite nozzles in teeming of various types of steel.The consumption of zirconia concentrate per unit of product is reduced by 10–12 times, which opens prospects of a significant increase in the volume of production of this new form of parts.Translated from Ogneupory, No. 1, pp. 54–56, January, 1986.     

Effect of compressive and tensile strains on the electrical resistivity of carbon microcoil/silicone-rubber composites

Spring-shaped carbon microcoils (CMCs) were embedded in silicone-rubber to form CMC/silicone-rubber composites. The electrical and mechanical properties of the composites were examined and compared with those of the composites involving straight carbon nanofibers and carbon blacks as a conductor. The electrical resistivity of the CMC/silicone-rubber composites decreased dramatically by increasing the CMC content and was as low as 100 Ω cm at 10% CMC volume content. With a compressive or tensile strain, the resistivity increased sharply much more than that of the other composites. The high resistive sensitivity of the composites is ascribed to an easy-to-deform configuration of the CMCs in the composites under an applied stress.     

A highly fluorinated epoxy resin. III. Behavior in composite and fiber-coating applications

The behavior of a highly fluorinated epoxy resin used as a composite matrix material with AS-4 fibers and as an AS-4 fiber coating was studied. The composite mechanical properties were obtained, and the adhesion of the matrix to the fibers was evaluated. Comparisons of uncoated and fluoropolymer coated AS-4 fibers using single fibers embedded in an Epon 828 matrix were made. Substantial improvement in fiber critical length, and therefore fiber-matrix adhesion, was observed.     

Preparation and surface- active properties of polyoxyethylene-glycol (600) monoesters of fatty acids

Polyoxyethyleneglycol (PEG-600) monoesters of undecylenic, lauric, myristic, palmitic, stearic, oleic, ricinoleic and 12-hydroxystearic acids were prepared in 80-85% yield by reacting PEG with boric acid, esterifying the resultant borate with fatty acid, and selectively hydrolyzing the borate ester; their surface active properties were evaluated. Increase in acyl chain length increased the surface tension. The presence of a double bond or hydroxyl group in C₁₈ series improved the wetting and emulsifying proper-ties. Unsaturation in the fatty acid chain reduced the foaming power.     

The Dyeing Properties of Monoazo Reactive Disperse Dyes Derived from –Chloro–4–aminoacetophonone on Polyester Fibre Blends

The preparation of monoazo reactive disperse dyes from –chloro–4–aminoacetophenone and the dyeing properties of these dyes on polyester–cotton and polyester–wool blends are reported.     

Explosion of a cylindrical charge above a rigid surface

We investigated the explosion of a cylindrical charge, which lies on a rigid surface or is positioned at some height above it. The explosion is modeled by the jump between the background and the region occupied by gas at a high pressure, density, and temperature. In an analogous formulation, the explosion from the Tunguska meteorite impact [1–4] was modeled by spherical and cylindrical explosive waves which consider the gravitational back pressure. Explosions from charges with nontraditional shapes have been studied [5–8]. Reflections of an explosive wave from a point charge from a rigid surface have been examined [9–10]. A more complete review of investigations on the spatial effects of forming propagating explosive waves can be found in [11].Moscow. Translated from Fizika Goreniya i Vzryva, Vol. 27, No. 6, pp. 131–134, November–December, 1991     

The structure of acetylene flames for diamond synthesis

An acetylene flame was photographed with an SIT camera through optical filters, and the signals were Abel transformed to obtain two-dimensional emission-intensity profiles. It was found that the intensive emissions of CH* and C*₂ are localized at the feather boundary, while the OH* emission is localized at the intermediate zone. The structure of the acetylene flame was made clear: it consists of a carbon-radical-rich feather and an oxygen-radical-rich intermediate zone. The carbon-radical concentrations are approximately in equilibrium near the burner exit while they decrease almost linearly via interdiffusion and reactions with the oxygen-radicals in the intermediate zone.Numerical simulations including detailed gaseous and surface reactions reproduced well previous preliminary calculations showing that CH₄ is rapidly produced in the boundary layer near the substrate followed by an increase in CH₃. This result satisfactorily explains the measured dependence of growth rate on the substrate temperature and ratio.     

Preparation of siloxane-like films by glow discharge polymerization

Glow discharge polymerizations of tetramethoxysilane (TMOS), tetramethylsilane/oxygen mixture (½ molar ratio) (TMS/O₂), hexamethyldisiloxane (HMDSO), and tetramethyldisiloxane (TMDSO) were carried out for the preparation of thin, polymeric films with siloxane structures. The chemical composition of the formed polymers was examined by elemental analysis, infrared spectroscopy, and electron spectroscopy for chemical analysis (ESCA) in connection with polymerization conditions, especially, a level of the radiofrequency (rf) input power per mass of the monomers (W/FM value). The polymers prepared from HMDSO at fairly low W/FM values resembled in chemical composition the conventionally polymerized polydimethylsiloxane. The surface properties of the formed polymers also were evaluated by the measurement of surface energy.     

A review of the unique features of HDL apoproteins

The human plasma high density lipoproteins (HDL) are a heterogeneous ensemble of five proteins associated with both neutral and polar lipids. The sequences of all five proteins are known. ApoA-I and apoA-II are the major protein components; apoC-I, apoC-II and apoC-III are the minor protein components. All these apoproteins spontaneously recombine with phospholipids to give stable lipid-protein complexes and freely exchange between the two major HDL subclasses, HDL₂ and HDL₃. In addition, ApoC-I, apoC-II, and apoC-III exchange between HDL and very low density lipoproteins. Furthermore, certain HDL apoproteins are activators for plasma enzymes that are important in lipid metabolism. ApoA-I and apoC-I activate lecithin/cholesterol acyltransferase; apoC-II is an activator of lipoprotein lipase. The regions of apoC-I and apoC-II that are involved in the activation of these enzymes have been localized with synthetic peptides. Studies of synthetic and native fragments of apoA-II, apoC-I, apoC-II, and apoC-III as well as model lipid-binding peptides have identified specific regions with structural features common to lipid-binding proteins. These special properties, which include helical potential, sequences with a critical amphipathic length, and high hydrophobicity of the nonpolar side of the amphipathic helix, are the determinants of HDL structure and metabolism.     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.