A study on the degree of deliberation and meditation of cyber poll respondents for nuclear-related decision making

Public participation is essential in each step of the nuclear-related decision-making process. Recently, the electronic systems using the Internet have become quite popular, and have emerged as a good medium for communicating with the public. In this study, a comprehensive utilization of electronic public participation was used to analyze public opinion on a given nuclear-related decision-making process. The degree of deliberation and meditation of the public participating in an electronic poll survey was evaluated, and the decision-making factors representing the personal characteristics of the poll respondents such as age, income, education, residence, degree of knowledge and concern were carefully incorporated when preparing the poll-survey questionnaire for its evaluation. Fuzzy analysis was used to assess and aggregate the responses to each decision-making factor. As a case study, this procedure was used to analyzing public opinion on the location of a low-level radioactive waste disposal facility on the campus of Seoul National University. The results show that there is a tendency of respondents who are on the negative side of the argument to be more deliberate and meditative in their decision-making process than those on the positive side. Knowledge and residence were found to be important decision-making factors.     

ZJ510L-B汽车用高强度热轧板的试制

珠钢150t电弧炉-LF(VD)-CSP(紧凑式带材生产)流程试生产的5～8mm ZJ510L-B(0．16C--1．22Mn)汽车用高强度热轧板的铁素体晶粒尺寸为6．0～9．2μm，带状组织为1．5～2．5级，强度极限σb562～610MPa，延伸率δ5 32．0％～38．6％。文中还分析和提出了带状组织的形成原因和改进措施。     

Surface modification and functionalization of electroactive polymer films via grafting of polyelectrolyte,polyampholyte and polymeric acids

Films of electroactive polymers, such as polyaniline (PAN) in its emeraldine base form, and poly(3-alkylthiophene), poly(3-hexylthiophene) (P6TH), poly(3-octylthiophene) (P8TH), and poly(3-dodecylthiophene) (P12TH) can be readily functionalized via thermal or near ultraviolet-light-induced surface graft copolymerization with monomers of polyelectrolyte, polyampholyte and polymeric acids. The monomers used in the present work include dimethyl sulphate quaternized dimethylamino-ethylmethacrylate (DMAEM·C₂H₆SO₄), 3-dimethyl(methacryloyloxyethyl)ammonium propane sulphonate (DMAPS), acrylic acid (AAc) and a sodium salt of styrene sulphonic acid (NaSS). The surface structures and compositions of the electroactive polymer films after functionalization via graft copolymerization were characterized by angle-resolved X-ray photoelectron spectroscopy. Graft copolymerization of poly(3-alkylthiophene) films, but not PAN films, with the hydrophilic monomers readily results in a stratified surface microstructure arising from the migration of the hydrophilic graft chains beneath a thin surface layer which is much richer in the substrate chains. On the other hand, graft copolymerization of PAN films with AAc and NaSS readily gives rise to a self-protonated (and thus conductive) surface structure.     

过共晶铝硅合金细化初晶硅的研究

研究了ZL8604过共晶铝硅合金初晶硅细化剂和加入方式与加入量以及影响细化效果的冶铸工艺因素,实验结果达到了技术指标要求。     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.