Heat extraction characteristics by coaxial heat exchanger

This study was performed to investigate the heat extraction characteristics from shallow geothermal resources using a coaxial heat exchanger. First, a computer simulation program for a coaxial heat exchanger was checked and verified by laboratory experiments. After inspecting the effectiveness of the computer program described herein, a numerical simulation for a real scale model was conducted under the condition that the heat transfer mechanism in the stratum was heat conduction. Unsteady heat extraction characteristics are presented herein, and the effects of the tube material, inner diameter, and circular modes on the heat extraction rate are discussed. From the computer results it was found that the heat extraction performance using a coaxial heat exchanger greatly depended on the factors mentioned above in the range of the parameters covered in this study. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 496–513, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20083     

Remote sensing system for spatial electric field strength using free space light transmission

Most of the breakdowns in an electric power system are caused by lightning to the tower used for high‐voltage transmission wires. To avoid accidents due to lightning, it would be desirable to develop a measurement system for the spatial electric field distribution around the tower. We have developed a new system that can measure the electric field around the steel tower for electric power transmission by using an optical electric sensor. In conventional methods, the sensor is generally illuminated by light transmitted by optical fibers. On the other hand, the new measurement system illuminates the Pockels sensor directly by using a laser to measure the far electric field. Furthermore, our newly proposed feedback system makes it possible to measure the spatial electric field without concern for the change of Pockels sensor's operation point influenced by temperature change. This system is applicable as a remote sensing system to monitor the spatial electric field around a high‐voltage transmission line. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 10–19, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20552     

Recombinant Long-Acting Thioredoxin Ameliorates AKI to CKD Transition via Modulating Renal Oxidative Stress and Inflammation

An effective strategy is highly desirable for preventing acute kidney injury (AKI) to chronic kidney disease (CKD) transition. Thioredoxin-1 (Trx), a redox-active protein that has anti-oxidative and anti-inflammatory properties, would be a candidate for this but its short half-life limits its clinical application. In this study, we examined the renoprotective effect of long-acting Trx that is comprised of human albumin and Trx (HSA-Trx) against AKI to CKD transition. AKI to CKD mice were created by renal ischemia-reperfusion (IR). From day 1 to day 14 after renal IR, the recovery of renal function was accelerated by HSA-Trx administration. On day 14, HSA-Trx reduced renal fibrosis compared with PBS treatment. At the early phase of fibrogenesis (day 7), HSA-Trx treatment suppressed renal oxidative stress, pro-inflammatory cytokine production and macrophage infiltration, thus ameliorating tubular injury and fibrosis. In addition, HSA-Trx treatment inhibited G2/M cell cycle arrest and apoptosis in renal tubular cells. While renal Trx protein levels were decreased after renal IR, the levels were recovered by HSA-Trx treatment. Together, HSA-Trx has potential for use in the treatment of AKI to CKD transition via its effects of modulating oxidative stress and inflammation.     

Application of ultrasonic treating to degassing of metal ingots

The relations between porosity in the ingot and the effecting factors such as the ultrasonic power and the time of ultrasonic vibration (UV) treating to melt were investigated. Moreover, the mechanism of the porosity formation and the prevention method was studied. The results indicate that the effect of degasification was better when the intensity of UV is above threshold value. On the contrary, the intensity of UV below the value resulted in the increase of the gas content in the ingot and the decrease of density. It could be confirmed that there is an appropriate time on degasification by UV treating. When treating time is over the time, the density of the ingot tended to decrease. By using UV to degas with constraint cooling in the bottom of the ingot, the value of porosity volume (PV) can be decreased below 0.1 cm³/100 g and the η_deg is near to 97%.     

Quantum-Mechanical Properties of Protons in Solid Molecular Hydrogen at Megabar Pressures

Quantum distributions of protons in three high-pressure phases of solid molecular hydrogen are investigated by the first-principles path integral molecular dynamics (FP-PIMD) method, in which interatomic forces are calculated precisely based on the density functional theory. The distributions have entirely different symmetries from those predicted by conventional simulation with classical treatment of protons. Especially in phase II, we found that molecular rotation is hindered by quantum fluctuation of protons, having a strong resemblance to a quantum distribution of impurity muonium in crystalline silicon. The mechanism of this “quantum localization” is clarified by a detailed study of the potential energy surface for the molecular rotation.     

Optimal periodic maintenance strategy under an intermittently used environment

In this paper, the optimal periodic replacement-like strategy with minimal repairs is considered under an intermittently used environment. Suppose that transactions or jobs with exponential service times arrive at a system according to a homogeneous Poisson process and the system is alternatively in either a busy or an idle period subject to demand for use. We derive approximately the optimal preventive maintenance schedule which minimizes the relevant expected cost criterion for the system which behaves intermittently on an M/M/1 queueing process, and compare it with the usual maintenance schedule for the continuously used system.     

Study on dominant mechanism of high-cycle fatigue life in 6061-T6 aluminum alloy through microanalyses of microstructurally small cracks

The mechanism controlling the fatigue life of a precipitation-hardened Al–Mg–Si alloy (6061-T6) at a high-cycle fatigue (HCF) regime of over 10⁷ cycles was investigated in detail. It was found that over 90% of the total fatigue life was occupied by the growth process of a microstructurally small crack at relatively low stress amplitude. The small crack was often found to be arrested and halted for a long period (more than 10⁶ cycles) before it began to grow again, which resulted in a significantly slow growth process. The small crack was then analyzed not only by the conventional fractography but also by the cross-sectional observation of the crack tip region using a focused ion beam and transmission electron microscopy. These observations, supplemented also by a grain orientation analysis using electron backscattered diffraction, explicitly revealed the following points: (i) the small crack growth observed on the specimen surface is primarily related to facet-type cracking that occurs exclusively at the specimen surface; (ii) the growth direction of the small crack has strong anisotropy (i.e. surface-induced growth); (iii) the facet-type cracking is related to the formation of persistent fine slip bands that accompany no structural change of the matrix. On the basis of these results, the micromechanism of small crack growth and its relation to the concept of fatigue limit at the HCF regime is discussed in detail.