Reversible Regulation of Gelatinization of Potato Starch with Poly(ε‐lysine) and Amino Acids

Poly(ε‐lysine) (PL), lysine (Lys), monosodium glutamate (GluNa), glycine (Gly), alanine (Ala), and leucine (Leu) were used to regulate the characteristic gelatinization behavior of potato starch. As determined by differential scanning calorimetry, PL, Lys, and GluNa with positive or negative net charge elevated the gelatinization temperature with increasing amount added as compared with the small effect of Gly, Ala, and Leu with zero net charge. The peak viscosity evaluated by a Rapid Viscoanalyser was markedly decreased by adding PL, Lys, and GluNa, whereas Gly and Ala had no effect on the peak viscosity. The swelling was also decreased by added PL, Lys, and GluNa, whereas it was unchanged by added Gly, Ala, and Leu. Potato starch immersed in PL or amino acid solution released most of the retained PL and amino acids by the subsequent washing with water. The increased gelatinization temperature of the PL‐treat­ed potato starch returned to the original value by washing with water. It is thus considered that the regulatory effects of PL and amino acids on the gelatinization behavior of potato starch were substantially reversible.     

Additive Effect of Kirkendall Void Formation in Sn-3.5Ag Solder Joints on Common Substrates

The Sn-3.5Ag and Sn-3.5Ag-0.2Co-0.1Ni lead-free solders were investigated on common electronics substrates, namely, organic solderability preservative (OSP) and electroless Ni/immersion Au (ENIG) surface finishes. The formation of Kirkendall voids at the interfacial region during isothermal solid aging was explored. For the Sn-3.5Ag-0.2Co-0.1Ni/OSP solder joint, the Kirkendall voids were present after isothermal solid-state aging at higher temperature (e.g., 150°C); however, the size of voids did not change remarkably with prolonged aging time due to the depressed Cu₃Sn layer growth. For ENIG surface finishes, the 0.2Co-0.1Ni additions seemed to enhance the longitudinal groove-shaped voids at the Ni₃P layer; however, void formation at the solder/Ni₃Sn₄ interface was effectively reduced. This might be attributed to the reduced Sn activity in the solder matrix and the suppressed Ni-P-Sn layer formation.     

Five‐Membered Cyclitol Phosphate Formation by a myo‐Inositol Phosphate Synthase Orthologue in the Biosynthesis of the Carbocyclic Nucleoside Antibiotic Aristeromycin

Aristeromycin is a unique carbocyclic nucleoside antibiotic produced by Streptomyces citricolor. In order to elucidate its intriguing carbocyclic formation, we used a genome‐mining approach to identify the responsible enzyme. In silico screening with known cyclitol synthases involved in primary metabolism, such as myo‐inositol‐1‐phosphate synthase (MIPS) and dehydroqunate synthase (DHQS), identified a unique MIPS orthologue (Ari2) encoded in the genome of S. citricolor. Heterologous expression of the gene cluster containing ari2 with a cosmid vector in Streptomyces albus resulted in the production of aristeromycin, thus indicating that the cloned DNA region (37.5 kb) with 33 open reading frames contains its biosynthetic gene cluster. We verified that Ari2 catalyzes the formation of a novel five‐membered cyclitol phosphate from d ‐fructose 6‐phosphate (F6P) with NAD⁺ as a cofactor. This provides insight into cyclitol phosphate synthase as a member of the MIPS family of enzymes. A biosynthetic pathway to aristeromycin is proposed based on bioinformatics analysis of the gene cluster.     

X-ray Photoelectron Spectroscopy Study on the Process of Apatite Formation on a Sodium Silicate Glass in Simulated Body Fluid

The process of apatite formation on the surface of Na₂O–SiO₂ glass in a body environment was investigated, mainly by X-ray photoelectron spectroscopy, as a function of soaking time in a simulated body fluid (SBF). The glass was found to release Na⁺ ions via exchange with H₃O⁺ ions in the SBF to form Si—OH groups on its surface. These Si—OH groups induced apatite formation indirectly, by forming calcium silicate and amorphous calcium phosphate. The formation of the calcium silicate and amorphous calcium phosphate is attributed to electrostatic interactions between the Si—OH groups on the glass surface and the calcium and phosphate ions in the SBF.     

Monodispersed nanoporous starburst carbon spheres and their three-dimensionally ordered arrays

Controlled syntheses of highly monodispersed nanoporous carbon spheres via a nanocasting route are described. Previously reported monodispersed super-microporous or mesoporous silica spheres with hexagonally ordered pore channels were used as sacrificial templates, and the effect of pore sizes of the templates on the porous properties of the nanocast carbon spheres was comprehensively studied. The resultant carbon spheres exhibited a unique starburst structure derived from radially-aligned pore channels in the silica template, and had a BET surface area of over 1000 m²g^?1. It was found out that the radial alignment and sufficiently large pore size of hexagonally ordered pore channels in the silica spheres were effective to enhance the degree of order of the starburst structure in the nanocast carbon spheres and that ordered nanoporous carbon spheres could be obtained even from the MCM-41-type mesoporous silica. The diameters of the nanoporous carbon spheres were controlled in the sub-micrometer range by changing the sizes of silica templates. Furthermore, three-dimensionally ordered arrays consisting of nanoporous carbon spheres were successfully fabricated via the self-assembly of mesoporous silica/carbon composite spheres and the subsequent dissolution of the silica templates.     

Apatite Formation Induced by Silica Gel in a Simulated Body Fluid

It has been confirmed that the essential condition for glasses and glass-ceramics to bond to living bone is the formation of an apatite layer on their surfaces in the body. It has been proposed that a hydrated silica formed on the surfaces of these materials in the body plays an important role in forming the surface apatite layer, but this has not yet been proved. In the present study, it is shown experimentally that a pure hydrated silica gel can induce apatite formation on its surface in a simulated body fluid when its starting pH is increased from 7.2 to 7.4.     

Studies on syntheses and permeabilities of special polymer membranes.: 15. Permeation characteristics of nylon-12 cellulose acetate blends

The permeation characteristics of nylon-12-cellulose acetate polymer blend membranes in the separation of polymers, poly(vinyl alcohols), from their aqueous solutions were investigated under various conditions. The permeation characteristics were influenced markedly by the ratio of nylon-12-cellulose acetate, the feed concentration, the operating pressure and temperature. It was found that the changes of polymer ratio and the concentration of blended polymer were related to the change of microporous structure of the resulting membranes. When the cellulose acetate content was higher a significant compaction of the membrane occurred under pressure. It was found that there was a concentration polarization of poly(vinyl alcohol) molecules on the membrane surface, whose thickness increased with increase in molecular weight of poly(vinyl alcohol) and in feed concentration. The bursting strength of the polymer blend membranes swollen with water increased considerably as the cellulose acetate content in the blended polymer increased.     

Studies on syntheses and permeabilities of special polymer membranes. IV. Permeation characteristics of improved cellulose nitrate membranes

For the purpose of the application of cellulose nitrate membranes for artificial kidneys, the permeation characteristics and the bursting strength of three types of membranes, which were prepared from a system of cellulose nitrate/methyl alcohol/1,4-dioxane/barium perchlorate (CN-1), from a system of cellulose nitrate/methyl alcohol/formamide (CN-2), and a poly(ethylene terephthalate) cloth coated with the casting solution of CN-2 (CN-3), were investigated under various conditions. It was found that permeabilities of these membranes were influenced significantly by the preparation methods of the membranes and the permeation conditions, and they depended upon the structure of the resulting membranes and the interaction between the polymer in the membrane and the feed. In blood filtrations, the permeation rates of our three types of membranes had about four-fold values than a cuprophane membrane, and moreover no protein was found in the blood filtrate. The bursting strength of the membranes swollen with water was in the order CN-3 > cuprophane > CN-2 > CN-1, and this ratio was calculated to be about 5.9:1.0:0.5:0.3     

High‐performance OCB‐mode field‐sequential‐color LCD

Abstract— Optically compensated bend (OCB) mode is a promising technology for future high‐quality display devices due to its wide viewing angle without gray‐scale inversion and color shift, fast response time, high contrast ratio, and wide temperature range. This paper summarizes the developments of the OCB mode and the optical performance of OCB‐mode field‐sequential‐color LCD.     

Effects of brain lesions on taste-potentiated odor aversion in rats.

Rats failed to acquire aversions to odor stimulus, which was followed 30 min later by an unconditioned stimulus (US). However, when the odor stimulus was accompanied by a taste stimulus, they acquired odor aversions as well as taste aversions. In this phenomenon, referred to as a taste-potentiated odor aversion, lesions of the amygdala disrupted both taste and odor aversions, whereas lesions of the parvicellular part of ventroposteromedial thalamic nucleus (VPMpc) or insular cortex (IC) disrupted taste aversion but attenuated only odor aversion. These results suggest that both taste and odor stimuli are associated with US in the amygdala and that taste inputs delivered to the amygdala through the IC and/or VPMpc play an important role in potentiation of odor aversion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)