Absorption effect in the calculation of a second-order nonlinear coefficient from the data of a maker fringe experiment

The effect of light absorption by sample in the analysis of Makerfringe data for estimating a second-order nonlinear coefficient hasbeen studied experimentally. Two theories, one by Jerphagnon andKurtz that neglects the absorption effect and one by Herman and Haydenthat takes into account the absorption effect, were compared with theexperimental results. It was found that Jerphagnon and Kurtz'sformula was unable to predict correctly not only the magnitude but alsothe incident angle dependence or the sample thickness dependence of thesecond harmonic signal generated by the sample with strong absorption, whereas the theory by Herman and Hayden was able to make thosepredictions fairly well. It was also found that the error in theestimated nonlinear coefficient when one uses Jerphagnon and Kurtz'sformula could be as large as 2-4 times the true value, depending onsample thickness.     

Simple model for the observed plasmon conical radiation interference patterns in a kretschmann configuration

In two previous papers we presented experimental results of measurements with a scanning plasmon optical microscope constructed in the Kretschmann configuration. The angular distribution of the conical radiation from the scanning tip was measured, and the multiple-scattering images of simple surface irregularities were detected. We make a simple model of the multiple-scattering images and compare it with our data, deriving excellent results.     

Control of the leakage current in SrTiO3 films by acceptor doping

Stoichiometric SrTiO3 (STO) films doped with Fe or Cr were prepared by r.f. magnetron sputtering technique. The effects of Fe or Cr doping in the SrTiO3 films were studied on the leakage current property which was discussed by defect chemistry. The experimental results can be explained by a model in which oxygen vacancies are the key defects responsible for the leakage current. Acceptor doping, with a small concentration of Fe or Cr, has led to a substantial improvement to 10–9 order in the leakage current density. Above the concentration of 0.010.02 mol% Fe2O3, Cr2O3, however, as the concentration increased, the leakage current increased. These acceptors in Ti4+ site are expected to electrically compensate for donor species such as oxygen vacancies, thereby reducing the concentration of mobile carriers that contribute to electrical conduction. Consequently, acceptor doped STO films have been shown to be superior to undoped films for applications requiring high leakage resistance, such as dynamic random access memory capacitors. © 1998 Chapman & Hall     

Electrophysicochemical characteristics of a waterpen point coronadischarge

Some interesting electrophysicochemical characteristics of waterpen point-to-plate discharges with DC and AC power have been investigated in a room atmosphere. The metal point electrode of a conventional point-to-plate air gap is severely bombarded by energetic ions from the discharge region near the point. Concurrently, the temperature of the point is greatly increased. There are different characteristics for the waterpen point discharge, because the surface temperature of the waterpen point stays low due to the evaporation of the moisture from the waterpen point. In this paper, the discharges and electrophysicochemical characteristics of a waterpen point and a Pt metal point have been studied to evaluate the differences. It was found that mists and sprays are dispersed from the waterpen point due to the bombardment of ions. Also, a positive corona is effective for mist dispersion, a negative corona disperses sprays, and AC corona disperses both mists and sprays. The AC discharge of the waterpen point generated more ozone of 56 ppm, while it was the negative DC discharge of the Pt point that produced more ozone of 30 ppm. The AC discharge of the waterpen point produced 0.11 ppm at 10 kV, and the Pt point produced 0.10 ppm at 15 kV. The DC discharge of the both points showed no NO formation     

Soluble polystyrenes with pyrrole pendant groups and their electroactive properties

Summary Four soluble styrenic polymers containing 3-substituted pendant pyrrole rings with ester or amide arm spacer were synthesized. Their electroactive characteristics were investigated by cyclic voltammetry. The chemical oxidation was accomplished by adding FeCl₃ into a solution of styrenic polymers dissolved in 1:1 mixture of dimethylformamide (DMF) and acetonitrile (ACN). The electrical conductivities of the chemically oxidized black powder of the styrenic polymers were in the range of 10^-1010^-9 S/cm.     

Single-mode GaAs/AIGaAs W waveguides with a low propagation loss

We have designed a low-loss single-mode GaAs/AIGaAs optical waveguide with a symmetric five-layer heterostructure at the 1.31-μm wavelength by use of an effective-index method. Waveguides with a W-shaped refractive-index profile have been grown by use of a metallo-organic chemical vapor deposition technique and fabricated with a chemical wet-etching method. Propagation loss has been measured by use of the Fabry-Perot resonance method and a sequential-cleaving experiment. The measured loss is as low as 0.19 dB/cm for waveguides with 2.3-μm thickness and 4.3-μm width, which is comparable to the lowest-loss semiconductor waveguides yet reported. These waveguides could be used to make low-loss modulators for guided-wave devices.     

In situ measurements of ion-exchange processes in single polymer particles: laser trapping microspectroscopy and confocal fluorescence microspectroscopy

Ion-exchange processes of a cationic dye (Rhodamine B; RhB) were studied for individual polymer particles (diameter of 16-20 μm) by laser trapping microspectroscopy and confocal fluorescence laser microspectroscopy. The absorbance of RhB at 565 nm adsorbed on a cation-exchange particle increased linearly with the concentration of RhB in the aqueous phase, while it was independent of the particle diameter. Fluorescence intensity profile measurements of RhB along the particle diameter by confocal fluorescence microspectroscopy directly proved that ion exchange took place in the surface layer (～2-μm thickness) of the particle in the initial stage (1 h). Diffusion of RhB in the particle was very slow, and ion exchange proceeded gradually to the inner volume in the order of days. The ion-exchange processes were analyzed on the basis of simulation of the time course of the concentration profile of RhB in the particle, and the diffusion coefficient of RhB was determined to be (2-4) × 10(-11) cm(2)·s(-1).     

Growth technique for producing high quality superconducting YBa2Cu3O7-δ single crystals

High quality single crystals of YBa₂Cu₃O_7- (YBCO) have been grown in yttria-stabilized zirconia crucibles by using a flux method. This method yields crystals with area 3 to 4 times larger than a previous method, and 3 to 5 times more crystals. Several crystals as large as 3×4mm² in thea-b plane are routinely obtained from each crucible. The samples typically range from 10 to 60 m thick. The superconductivity transition temperatureT _c of the crystals, measured by magnetic susceptibility, falls in the range 92.5 to 93 K and the smallest transition width (10 to 90%) is less than 0.25 K. Compared with the previous method, the surface is generally smoother, with less flux, and larger untwinned regions of 1 x 1 mm² are usually found.     

Spin correlations for an Anderson impurity in conventional and unconventional superconductors

We present a theoretical study of the spin-spin correlation functionC(r) in a superconductor, whereC(r) = S · s(r);S is an impurity spin operator, ands(r) is the conduction electron spin density operator. We model the impurity using the Anderson Hamiltonian, and use the U , 1/N expansion to do the calculations. In addition to conventional superconductors, we consider unconventional superconductors, in which the order parameter (k) has a lower rotational symmetry, and has vanishing angular average. Of particular interest is the way that the behavior ofC(r) reflects two length scales, the Kondo length _k and the superconducting coherence length, ₀, and the way that its behavior is affected by the angular dependence of unconventional gaps.     

Thermal conductivity of CVD diamond films

Diamond films 60 and 170 µm in thickness were grown by PACVD (plasma-assisted chemical vapor deposition) under similar conditions. The thermal diffusivity of these freestanding films was measured between 100 and 300 K using AC calorimetry. Radiation heat loss from the surface was estimated by analyzing both the amplitude and the phase shift of a lock-in amplifier signal. Thermal conductivity was calculated using the specific heat data of natural diamond. At room temperature, the thermal conductivity of the 60 and 170 m films is 9 and 16 W-cm^–1. K^–1 respectively, which is 40–70% that of natural diamond, The temperature dependence of thermal conductivity of the CVD diamond films is similar to that of natural diamond, Phonon scattering processes are considered using the Debye model, The microsize of the grain boundary has a significant effect on the mean free path of phonons at low temperatures. The grain in CVD diamond film is grown as a columnar structure, Thus, the thicker film has the larger mean grain size and the higher thermal conductivity. Scanning electron microscopy (SEM) and Raman spectroscopy were used to study the microstructure of the CVD diamond films. In this experiment, we evaluated the quality of CVD diamond film of the whole sample by measuring the thermal conductivity.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.