Corrosion Inhibition of Mild Steel in Acidic Medium using 2-amino Thiophenoland 2-Cyanomethyl Benzothiazole

The corrosion inhibition characteristics of 2-amino thiophenol (ATP) and 2-cyanomethyl benzothiazole (CNMBT) on two types of steel in 1m HCl medium were investigated at different temperatures (25, 30, 35, 40 and 50°C). The pitting corrosion behaviour for the same system was studied using a potentiodynamic technique. The pitting corrosion resistance of steel samples increased with increase in concentration of the ATP and CNMBT. Some samples were examined by scanning electron microscopy. The effects of the inhibitors on the general corrosion of the two samples were investigated by using gravimetric and galvanostatic polarization techniques. The inhibition efficiencies increased with increase their concentration but decreased with increase in temperature. Free energies of activation, enthalpies and entropies for the inhibition processes were determined from rate constant data measured and different temperatures at different concentrations of ATP and CNMBT. Results were compared with fits obtained from the application of the Langmuir isotherm. Results were correlated to the chemical structure of the inhibitors. The inhibition efficiency of CNMBT is higher than that of ATP.     

Infostations for highway cigar-shaped cells

An infostation is an isolated pocket area, with small coverage of high bandwidth connectivity, which collects information requests of mobile users and delivers data while users are going through the coverage area. In this paper, the performance of infostations networks with single, double and triple frequencies is studied. The two-slope propagation loss model is used to calculate the signal-to-interference plus noise ratio. The effect of the propagation parameters on the infostation performance is studied.     

Effects of antimicrobial agents on the thermal and mechanical properties of acrylate hydrogel matrices

Polymer materials with antimicrobial activity are prepared by UV polymerization of acrylate and methacrylate mixture at room temperature. The antimicrobials are silver acetate and copper (II) acetate, used without pretreatment. Their chemical stability in the acrylate matrix and their effect on the thermal and mechanical properties of the polymer matrix are investigated as a function of their concentration up to 15 wt %. Physico‐chemical, thermal, rheological, and morphological analyses as well as the surveillance of metal salts release in aqueous medium are conducted. A significant decrease in the thermal stability of the salts introduced into the acrylate matrix is observed after UV treatment. The metal salts also have significant effects on the properties of the matrix. A plasticization and densification of the material associated with an aggregation of salts up to the percolation at the highest concentration are highlighted. At equal concentrations, the effects are more pronounced in the presence of copper salts. The latter was released more slowly than silver salts from acrylate material. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43501.     

Synthesis,Thermal Properties and Electrical Conductivity of Na-Sialate Geopolymer

This work aims to study the thermal behavior of basic-geopolymers derived from metakaolin (clay). The geopolymers were characterized by different techniques: thermal analysis (DTA, TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and impedance spectroscopy. Some physicochemical properties of the products were also determined: the phases obtained after geopolymer heat treatment and their electrical properties. The results obtained after drying and heat treatment showed that the products kept their initial shapes, but revealed variable colors depending on the temperatures at which they were treated. The products obtained are amorphous between 300 up to 600 °C with peaks relating to the presence of nanocrystallites of muscovites and zeolite, thus at 900 °C it is quite amorphous but only contains nanocrystallites of muscovites. From the temperature of 950 °C, we notice that the geopolymer has been transformed into a crystalline compound predominated by the Nepheline (NaAlSiO₄) with the presence of a crystalline phase by minor peaks of Muscovite, this crystalline character has been increased at 1100 °C to obtain a whole phase crystalline of a Nepheline. The treatment of this geopolymer for one hour at 1200 °C shows an amorphous phase again corresponding to corundum (α-Al₂O₃). This indicates that the dissolution of the grains by the liquid phase induces the conversion of the material structure from sialate [–Si–O–Al–O] to sialate siloxo [–Si–O–Al–O–Si–O–] and the formation of a new crystalline phase (α-Al₂O₃). This development of sialate to sialate-siloxo was confirmed by IR spectroscopy. As mentioned above, from 300 to 900 °C, Na-sialate geopolymer exhibits the same disorder structure of nepheline. The crystal structure of nepheline is characterized by layers of six-membered tetrahedral rings of exclusively oval conformation. The rings are built by Regularly alternating tetrahedral AlO₄ and SiO₄. Stacking the layer’s parallel to the c axis gives a three-dimensional network containing channels occupied by Na cations. This topology favors easy movement of Na⁺ ions throughout the structure. For this reason, ionic migration in nepheline is widely reported. The refinement of Na-Sialate geopolymer at room temperature gives bulk high ionic conductivity of about 5 × 10^?5 S cm^?1 and this is due to the probable joint contribution of H⁺ and Na⁺ ions. Above 200 °C, Na⁺ seems to remain the only charge carrier with a low activation energy of about Ea?=?0.26 eV. At higher temperatures, the characteristic frequencies become so close that it is impossible to distinguish the contributions. A total resistance comprising both grain and grain boundaries contribution is then determined.

     

Vapor-liquid equilibrium of ethanol/ethyl acetate mixture in ultrasonic intensified environment

A vapor-liquid equilibrium (VLE) study was conducted on ethanol/ethylacetate mixture as a preliminary step towards developing an ultrasonic-assisted distillation process for separating azeotropic mixtures. The influence of ultrasonic intensity and frequency on the vapor-liquid equilibrium (VLE) of the mixture was examined using a combination of four ultrasonic intensities in range of 100–400W/cm² and three frequencies ranging from 25–68 kHz. The sonication was found to have significant impacts on the VLE of the system as it alters both the relative volatility and azeotrope point, with preference to lower frequency operation. A maximum relative volatility of 2.32 was obtained at an intensity of 300 W/cm2 and a frequency of 25 kHz coupled with complete elimination of ethanol-ethyl acetate azeotrope. Results from this work were also congruent with some experimental and theoretical works presented in the literature. These findings set a good beginning towards the development of an ultrasonic assisted distillation that is currently in progress.     

Dielectric analysis of α‐relaxation process of chlorinated poly(vinyl chloride) stabilized with nitro‐phenyl maleimide

Nitro‐phenyl maleimide (NPM), is the organic stabilizer for poly (vinyl chloride) (PVC), has been investigated as thermal plasticization for rigid chlorinated poly (vinyl chloride) (CPVC). Dielectric relaxation of CPVC stabilized with 10 wt% of NPM has been studied in temperature and frequency ranges of 300–450 K and 10 kHz–1 MHz, respectively. An analysis of the dielectric constant, ε′ and dielectric loss index, ε″, was performed assuming a plasticization effect of NPM molecules. The plasticization effect of NPM molecules was confirmed by the behavior of the dielectric modulus M′ and M″ spectra. A clear dielectric α‐relaxation process has been obtained in the studied temperature range. The results showed that NPM reduce the glass transition temperature, T_g, of CPVC by about 20 K. This effect has been assigned to the plasticization effect of NPM. At lower temperatures, dielectric modulus spectra reveal that there is a role of the effect of the electrode polarization in the relaxation process. The behavior AC conductivity, σ_ac, indicated that the conduction mechanism in all CPVC samples is hopping type conduction. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Hydrogen production from organic fatty acids using carbon-doped TiO2 nanoparticles under visible light irradiation

The photocatalytic production of H₂ using carbon-doped TiO₂ (CTiO₂) nanoparticles has been investigated in single or mixed systems of organic fatty acids (OFAs) under visible light irradiation, including acetic acid, propionate acid, butyric acid and lactic acid. When OFAs were applied at the same electron density (10 e-eq L^?1), the H₂ evolution rates followed the order of propionic acid > butyric acid ≈ acetic acid > lactic acid, whereas at the same molar concentration (0.5 mol L^?1), that order changed to lactic acid > acetic acid > butyric acid ≈ propionic acid. This result implied that the electron transfer efficiency differed from four OFAs, probably due to their different affinity with CTiO₂. O₂^?? and CH₃? partially contributed to OFAs degradation and H₂ production. The quantum dynamics simulations of electron transfer revealed that the dominant mechanism of H₂ production was direct electron transfer from adsorbed OFAs to CTiO₂. This work aims to pursue the synergy of solar energy utilization and conversion of OFAs into H₂.     

Optimization of factors affecting esterification of mixed oil with high percentage of free fatty acid

Increased environmental awareness and depletion of resources are driving industry to develop alternative fuels from renewable sources that are environmentally more acceptable. Biodiesel is a non petroleum based fuel that consists of alkyl esters from transestrification of the refined/edible types of vegetable oils alcohol and alkaline catalysts can be used. These catalysts require anhydrous conditions and feed stocks with low levels of free fatty acids (FFAs). Inexpensive feed stocks are used in biodiesel production to reduce its cost and to get rid of waste oils in environmentally friendly way. These oils may contain high levels of FFAs so it cannot be directly used with the base catalysts currently employed. Acid esterification reduces the FFAs content to the desirable level. The major factors that affect the conversion efficiency of the process are molar ratio of alcohol/oil, amount of catalyst, reaction temperature, catalyst type and stirring speed according to reaction duration. For this study, we used a model acid produced by mixing pure oleic acid with mixed oil (50% sunflower + 50% soybean oil). Methanol was used in the experiments due to its low cost. The best conversion efficiency obtained was 96.6% for a molar ratio of 6:1 at a temperature of 60 °C, 2.5% H₂SO₄ and stirring speed of 300 rpm. Finally, different types of waste cooking oil from home and restaurants were used to study the conversion efficiency compared with optimum conditions calculated for model acid oil to be used in biodiesel production with low cost.     

Transition metal nanoparticles doped carbon paper as a cost-effective anode in a microbial fuel cell powered by pure and mixed biocatalyst cultures

The poor wettability and high cost of the carbonaceous electrodes materials prohibited the practical applications of microbial fuel cells (MFCs) on large scale. Here, a novel nanoparticles of metal sheathed with metal oxide is electrodeposited on carbon paper (CP) to introduce as high-performance anodes of microbial fuel cell (MFC). This thin layer of metal/metal oxide significantly enhance the microbial adhesion, the wettability of the anode surface and decrease the electron transfer resistance. The investigation of the modified CP anodes in an air-cathode MFCs fed by various biocatalyst cultures shows a significant improving in the MFC performance. Where, the generated power and current density was 140% and 210% higher as compared to the pristine CP. Mixed culture of exoelectrogenic microorganism in wastewater exhibited good performance and generated higher power and current density compared to yeast as pure culture. The excellent capacitance with a distinctive nanostructure morphology of the modified-CP open an avenues for practical applications of MFCs.     

Axiomatic design principles in analysing the ergonomics design parameter of a virtual environment

One of the negative side effects experienced by users when interacting with virtual environment is visual symptoms. This paper explores the ergonomics design parameters of the virtual environment to minimize such negative side effect by applying axiomatic design principles. Axiomatic design is a method to provide a systematic way for designing products and large systems. The independence axiom is used to map customer domain (CAs) to functional domain (FRs) and physical domain (DPs). A paper based survey was conducted to identify and define customers' preference in the virtual environment. A virtual robot manufacturing system was developed as a case study to explore ergonomic design parameters that satisfy the independence of FRs and CAs. Results of this study shows that the ergonomic design parameters of virtual environment identified (DP₁₆₁-DP₁₆₂-DP₁₂₁-DP₁₁₁-DP₁₃₁-DP₁₄₁-DP₁₅₁-DP₁₅₂) have satisfied the independence functional requirement and desired visual comfort for users. By uncoupling the design it provides an efficient and effective sequence of design activities FR₁₆₁-FR₁₆₂-FR₁₂₁-FR₁₁₁-FR₁₃₁-FR₁₄₁-FR₁₅₁-FR₁₅₂.