Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

头臂动脉夹层逆行撕裂至主动脉的治疗

目的对头臂分支动脉夹层逆行撕裂至主动脉的罕见病例进行初步探讨。方法近来收治并手术的3例患者,1例为特发性颈动脉夹层,2例为医源性锁骨下动脉夹层,均保守治疗无效而行手术,分别采用腔内治疗和外科旁路手术方法。结果患者术后疼痛明显改善,术后随访复查CTA显示头臂动脉夹层稳定,假腔内血栓形成。结论对于累及主动脉的头臂动脉夹层,腔内治疗和开放手术均为可采用的方法。     

High Performance Millimeter‐Wave Image Reject Low‐Noise Amplifier Using Inter‐stage Tunable Resonators

A Q‐band pHEMT image‐rejection low‐noise amplifier (IR‐LNA) is presented using inter‐stage tunable resonators. The inter‐stage L‐C resonators can maximize an image rejection by functioning as inter‐stage matching circuits at an operating frequency (F_OP) and short circuits at an image frequency (F_IM). In addition, it also brings more wideband image rejection than conventional notch filters. Moreover, tunable varactors in L‐C resonators not only compensate for the mismatch of an image frequency induced by the process variation or model error but can also change the image frequency according to a required RF frequency. The implemented pHEMT IR‐LNA shows 54.3 dB maximum image rejection ratio (IRR). By changing the varactor bias, the image frequency shifts from 27 GHz to 37 GHz with over 40 dB IRR, a 19.1 dB to 17.6 dB peak gain, and 3.2 dB to 4.3 dB noise figure. To the best of the authors' knowledge, it shows the highest IRR and F_IM/F_OP of the reported millimeter/quasi‐millimeter wave IR‐LNAs.     

H-SPREAD: a hybrid multipath scheme for secure and reliable data collection in wireless sensor networks

Communication security and reliability are two important issues in any network. A typical communication task in a wireless sensor network is for every sensor node to sense its local environment, and upon request, send data of interest back to a base station (BS). In this paper, a hybrid multipath scheme (H-SPREAD) to improve both the security and reliability of this task in a potentially hostile and unreliable wireless sensor network is proposed. The new scheme is based on a distributed N-to-1 multipath discovery protocol, which is able to find multiple node-disjoint paths from every sensor node to the BS simultaneously in one route discovery process. Then, a hybrid multipath data collection scheme is proposed. On the one hand, end-to-end multipath data dispersion, combined with secret sharing, enhances the security of the end-to-end data delivery in the sense that the compromise of a small number of paths will not result in the compromise of a data message in the face of adversarial nodes. On the other hand, in the face of unreliable wireless links and/or sensor nodes, alternate path routing available at each sensor node improves the reliability of each packet transmission significantly. The extensive simulation results show that the hybrid multipath scheme is very efficient in improving both the security and reliability of the data collection service seamlessly.     

Ceramic chip antenna using meander conductor lines

A ceramic chip antenna using meander conductor lines has been designed, fabricated, and measured. The measured impedance bandwidth is 9.8% (1.85-2.06 GHz). It is increased to 19.1% (1.89-2.29 GHz) with an adjacent conducting plane. The radiation patterns are similar to that of a monopole antenna. The antenna gain is ~1.5 dBi     

FMQL45T900平台千兆以太网三层交换功能实现

随着以太网通信技术的发展,局域网子网间的通信业务增长迅速,而适用于子网间数据通信的传统路由器因为其转发速度慢、用户配置复杂等缺点,难以满足当前大量跨子网以及虚拟局域网之间通信数据量的需求。基于片上系统(System-on-Chip, SoC)平台FMQL45T900型号的FPGA芯片,采用VHDL硬件描述语言,自主研发了12端口的千兆以太网三层交换功能,并已在相应的硬件平台上进行了功能验证和性能测试。实验结果表明,基于固定长度链表的哈希查找方式实现简单、查找高效、复杂度低,该研究成果可在某些需要进行数据灵活交换的特殊的场景下进行应用。     

基于可分组设计的部分重复码研究

针对最小带宽再生情形下的有效修复问题,提出了一种新型部分重复(FR,fractional repetition)码设计。该设计由外部最大距离可分(MDS,maximum distance separable)码和内部重复码组成,称为GDDBFR(group divisible design based FR)码,可以达到随机访问模式下的系统存储容量,并且能够在很大范围内选择构造参数。理论分析指出,尽管GDDBFR码采用基于表格的修复方式,但通常具有大量的节点修复选择方案。此外,实验结果表明,与传统的RS(Reed-Solomon)码和再生码相比,GDDBFR码可以显著地减少失效修复时间。     

A 9‐Bit 80‐MS/s CMOS Pipelined Folding A/D Converter with an Offset Canceling Technique

A 9‐bit 80‐MS/s CMOS pipelined folding analog‐to‐digital converter employing offset‐canceled preamplifiers and a subranging scheme is proposed to extend the resolution of a folding architecture. A fully differential dc‐decoupled structure achieves high linearity in circuit design. The measured differential nonlinearity and integral nonlinearity of the prototype are ×0.6 LSB and ×1.6 LSB, respectively.     

1.55 /spl mu/m bottom-emitting InAlGaAs VCSELs with Al/sub 2/O/sub 3//a-Si thin-film pairs as top mirror

A a 1.55 /spl mu/m InAlGaAs/InP vertical-cavity surface-emitting laser grown by metal-organic chemical vapour deposition is presented. Al/sub 2/O/sub 3//a-Si thin-film pairs and InAlGaAs/InAlAs epitaxial layers are used as a top mirror and a bottom-side output coupler, respectively. Direct modulation characteristics through singlemode fibre are reported at a speed of 2.5 Gbit/s.     

Design of MAC protocols with fast collision resolution for wireless local area networks

Development of efficient medium access control (MAC) protocols providing both high throughput performance for data traffic and good quality of service (QoS) support for real-time traffic is the current major focus in distributed contention-based MAC protocol research. In this paper, we propose an efficient contention resolution algorithm for wireless local area networks, namely, the fast collision resolution (FCR) algorithm. The MAC protocol with this new algorithm attempts to provide significantly higher throughput performance for data services than the IEEE 802.11 MAC algorithm and more advanced dynamic tuning backoff (DTB) algorithm. We demonstrate that this algorithm indeed resolves collisions faster and reduces the idle slots more effectively. To provide good fairness performance and to support good QoS for real-time traffic, we incorporate the self-clocked fair queueing algorithm and a priority scheme into the FCR algorithm and come up with the real-time FCR (RT-FCR) algorithm, and show that RT-FCR can simultaneously achieve high throughput and good fairness performance for nonreal-time traffic while maintaining satisfactory QoS support for real-time traffic.