Phase diagram calculations of ZrO2-based ceramics with an emphasis on the reduction/oxidation equilibria of cerium ions in the ZrO2-YO1.5-CeO2-CeO1.5 system

Phase diagram calculations that were made previously for the ZrO₂-MO _m/2 (m = 2, 3, 4) systems and for the ZrO₂-YO_1.5-MO _m/2 (M = transition metals) systems have been extended to the ZrO₂-YO_1.5-CeO₂(-CeO_1.5) system to make an attempt to explain (1) thermogravimetric (TG) results as a function of oxygen potential, (2) electronic conductivity as a function of oxygen potential, and (3) a miscibility gap observed in air. The interaction parameters for the CeO₂-CeO_1.5-YO_1.5 system were obtained from the reported oxygen nonstoichiometry in CeO_2−x and rate earth doped ceria, (Ce,RE)O_2−δ . The interaction parameters for the ZrO₂-CeO₂ subsystem were obtained so as to reproduce the observed miscibility gap at 1273 K. Those thermodynamic properties can reproduce consistently the experimental behaviors of the electronic conductivity and the TG results in the (Zr_1−x Ce _x )_0.8Y_0.2O_1.9 solid solutions; these indicate the enhancement of reduction of CeO₂.     

Channel coding scheme for in HDTV digital VCR

The authors have developed an experimental in HDTV digital videocassette recorder (VCR). The VCR can record HDTV digital base-band signals for more than 64 min on a in metal particle (MP) tape. An eight-to-eight modulation ( ) scheme has been developed for this VCR to realize high-density recording. In order to suppress sufficiently the low-frequency components and reduce the occurrence probability of long-run-lengths for the recording data sequence, a new conversion table and bit-rearrangement method have been introduced in this modulation scheme. This conversion table has been particularly structured to reduce run-length using the bit-rearrangement process. Three kinds of typical HDTV images were used to evaluate the performance compared with the scrambled-NRZ method. The run-length distribution and the frequency spectrum were calculated for each image. The results showed that the occurrence probability of long-run-lengths were well reduced and the low-frequency components along with the DC component were sufficiently suppressed. Cross-talk interferences and overwriting noises were also found to be much less than those for the scrambled-NRZ method.     

Reversible hyperintensity of the anterior pituitary gland on T1-weighted MR images in a patient receiving temporary parenteral nutrition

We report a patient with severe anorexia nervosa, treated with temporary total parenteral nutrition (TPN), in whom reversible hyperintensity of the anterior pituitary gland was seen on T1-weighted MR images. The anterior pituitary was isointense with white matter before TPN therapy and became markedly hyperintense after 3 months of treatment. The intensity normalized after TPN therapy was discontinued. The transient hyperintensity was also seen in the basal ganglia and dorsal brain stem. We believe the hyperintensity of the anterior pituitary may be attributed to the TPN therapy.     

Inhibition in a microgravity environment of the recovery of Escherichia coli cells damaged by heavy ion beams during the NASDA ISS phase I program of NASA Shuttle/Mir mission no. 6

OBJECTIVE: To explore whether there are different disease patterns of rheumatoid arthritis (RA) in women and men. METHODS: We studied 55 male case patients and 110 female control patients who developed RA between 1970 and 1985 and who resided and received medical care in Olmsted County, Minnesota, for at least 10 years after the diagnosis of RA. Case and control patients were matched for the date of first diagnosis. The pattern and extent of joint involvement, the frequency of joint surgeries, and the presence and type of extraarticular manifestations were determined by retrospective chart review. RESULTS: Incidence rates in women were variable and age dependent, whereas the risk in men older than 36 years was constant over their lifetime. Erosive disease was more frequent in men than in women (72% versus 55%, respectively; P < 0.05) and tended to occur earlier (47% versus 31% for erosive disease within the first 4 years of RA). Although male sex was correlated with a higher risk of bony erosions and an accelerated course of RA, structural consequences of joint destruction were more pronounced in women. Joint surgery was performed more frequently in women (50%) than in men (27%) (P = 0.01). In particular, the frequencies of arthroplasties and arthrodeses of hand and foot joints were different (34 procedures in women versus 1 procedure in men; P < 0.001). Sex influenced the risk as well as the pattern of organ involvement in RA. Nodules and rheumatoid lung disease were typical manifestations in men (P = 0.001 and P < 0.001, respectively), whereas women typically developed sicca syndrome (P = 0.05). Despite differences in disease aggressiveness and disease pattern, there was little difference in the medical therapy in the men compared with the women. CONCLUSION: RA is a heterogeneous disease with variations in phenotype. Sex-associated factors influence disease severity as well as disease pattern. Because sex-related effects influence treatment goals, treatment responses, and side effects, they should be considered in clinical study design and analysis as well as in the treatment decisions for individual patients with RA.     

Power flow congestion relief by using customer‐side energy storage systems

In recent years, energy storage systems have increasingly been expected as a means of load leveling of the annual load factor. Of course there is an effect of installing the energy storage systems at the substation. But some customers operate their storage system in an integrated way and it also has an effect of increasing the load factor. In this paper the authors proposed that the energy storage systems on the customer side be used for congestion relief on transmission networks. However, it is not clear which kind of customer has the effect of relieving transmission line congestion. First, this paper assumes the authors determine the optimal configuration of energy equipment including energy storage systems. We propose a new contract whereby electric utility subsidizes a part of the entrance cost of the energy storage systems and customers change the output pattern of energy storage according to the request of the electric utility. This paper evaluates the possibility that the contract gives merit to both the electric utility and the customer. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 158(1): 36–45, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20299     

Effect of Pore–Grain-Boundary Interactions on Discontinuous Grain Growth

Pore behavior as influenced by migration of an abnormal grain boundary was studied. The pore behavior during the discontinuous growth of hot-pressed spinel (MgAl₂O₄) — whether the pore can move attached to the grain boundary — is particularly governed by the pore size and the matrix grain size. These phenomena can be understood from the interaction between the pore and the abnormal grain boundary.     

Synthesis of 2-alkyloyl-1,4,3,6-dianhydrosorbitol-5-sulfates and evaluation of the surface active properties

New anionic surfactants 2-alkyloyl-1,4,3,6-dianhydrosorbitol-5-sulfates were synthesized by sulfation of 2-alkyloyl-1,4,3,6-dianhydrosorbitol. Studies on the surface active properties such as surface tension, dispersibility and emulsifiability of these surfactants were carried out. The results showed these surfactants are better dispersants and emulsifiers than Span 80 and Span 85.     

Palladium‐Catalyzed Hydroxymethylation of Aryl‐ and Heteroarylboronic Acids using Aqueous Formaldehyde

Cyclometallated NHC palladium complexes prepared from palladium(II) acetate [Pd(OAc)₂] and unsymmetrical 1,3‐diarylimidazolinium salts catalyzed the hydroxymethylation of (hetero)arylboronic acids using an excess amount of formalin to afford (hetero)arylmethanols in good to satisfactory yields.

     

Controller design of desktop-size NC machine tool with multi-application function

In this paper, a desktop-size NC machine tool is first presented to have multi-application function, such as 3D-machining modes with and without handling a machining force, and profiling-control modes with and without using stick-slip motion. The NC machine tool consists of three single-axis devices with a high resolution of 1???m in position. A ball end mill called router bit or a thin wood-stick tool can be attached to the tip of the z-axis. The proposed machine tool realizes compliant motion required for the profiling control along a desired trajectory. The profiling-control mode can be applied to the lapping process of a metallic LED lens cavity. Next, a control strategy with fine stick-slip motion is further added to the profiling-control system to improve the lapping performance. The fine stick-slip motion is generated orthogonally to the direction of the tool movement. Generally, the stick-slip motion is an undesirable phenomenon to be eliminated in precision machineries. However, the proposed machine tool employs the fine stick-slip motion to partly regulate slight finishing energy. The effectiveness of the machine tool is demonstrated through an actual machining test of a wood material and a lapping test of a metallic LED lens cavity.