Oxidation products of cyanidin 3-O-β-d-glucoside with a free radical initiator

Recently, we have reported that anthocyanins show strong antioxidative activity, but no attention has been paid to anthocyanins from the viewpoint of the reaction mechanism of alkylperoxyl radicals; therefore, we investigated the reaction products of antioxidative anthocyanins (cyanidin 3-O-β-d-glucoside). Cyanidin 3-O-β-d-glucoside was reacted with 2,2′-azobis(2,4-dimet hylvaleronitrile) to generate the alkylperoxyl radicals, and the reaction products were isolated by high-performance liquid chromatography. The products were identified as 4,6-dihydroxy-2-O-β-d-glucosyl-3-oxo-2,3-dihydrobenzofuran and protocatechuic acid. Based on reaction products, the antioxidative mechanism of cyanidin 3-O-β-d-glucoside may be different from that of α-tocopherol; cyanidin 3-O-β-d-glucoside would produce another radical scavenger, as it would break down the structure and scavenge the radicals.     

Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

Impact of fertilizer on a small watershed of Lake Biwa: use of sulfur and strontium isotopes in environmental diagnosis

Sulfur and strontium isotopes (delta(34)S and (87)Sr/(86)Sr) were determined in 39 river water samples collected over three different cultivation periods (April, May, and June), and in several materials used for comparison (fertilizers, detergents, soils, irrigation and agricultural waters), to evaluate the impact of fertilizers on a small agricultural watershed of Lake Biwa, in central Japan. delta(34)S values in river water decreased (from +5.8 to -2.0 per thousand) with increasing SO(4) concentrations (3.8 to 93.2 ppm) from upstream to downstream of the watershed. Comparison of river water S isotopes with those of possible source materials indicates that the enrichment of SO(4) can be attributed to the dissolution of two kinds of fertilizers: (1) compound fertilizers commonly used in this area and (2) ammonium sulfate which is applied on a small scale. In contrast, (87)Sr/(86)Sr values of river water decreased with time from April (avg. 0.71163), through May (avg. 0.71139), to June (avg. 0.71127). The tendency of the sample plots on the (87)Sr/(86)Sr vs. 1/Sr diagram suggests a time-dependent increase in the contribution of soil water to the river, which is partly affected by the Sr-bearing fertilizers. It is suggested that a maximum of 25% of dissolved Sr is derived from these fertilizers, while more than 75% of it is of rock origin. Mass balance calculations permitted us to evaluate the proportion of fertilizer contribution in each river. Combined use of S and Sr isotopes together with concentration data could be a new environmental diagnosis technique for rivers and soils in localized watersheds.     

Stacking faults in an epitaxially grown PbTiO3 thick film and their size distribution

The microstructure of an epitaxial PbTiO₃ thick film, grown on a SrRuO₃/SrTiO₃ substrate at 600 °C by pulsed-MOCVD method, was investigated by using transmission electron microscopy. A number of extrinsic or intrinsic stacking faults were observed in the epitaxial PbTiO₃ thick film and they were parallel to the (0 0 1) plane of the PbTiO₃. We also investigated the size distribution of these stacking faults. The width of these stacking faults along the [1 0 0] axis of the PbTiO₃ was very small, ranging from 2 to 13 nm. It was also revealed that the size distribution of stacking faults depends on the position in the film: near the surface, near the substrate, near threading dislocations, and near 90° domain boundaries.     

TEM analysis of high temperature annealed W nanostructure surfaces

Helium plasma irradiation and electron heating experiments were conducted using tungsten in the divertor simulator NAGDIS-II. Helium plasma irradiation to tungsten led to the formation of nanostructures on the surface, while the nanostructures were annihilated after the potential of the specimen was changed to positive for several 10 min so that electrons irradiated the sample without ion irradiation. The specimens were analyzed in detail by transmission electron microscope with the help of focused ion beam technique. It is revealed that the helium nano-bubbles still remained even after the nanostructures were disappeared from the surface. Porosity of the nanostructured tungsten was measured from the TEM images.     

Analysis of biphasic lubrication of articular cartilage loaded by cylindrical indenter

Combination of theoretical biphasic analyses and corresponding experimental measurements for articular cartilage has successfully revealed the fundamental material properties and time-depending mechanical behaviors of articular cartilage containing plenty of water. The insight of load partitioning between solid and fluid phases advanced the prediction of the frictional behavior of articular cartilage. One of the recent concerns about biphasic finite element (FE) analysis seems to be a dynamic and physiological condition in terms of mechanical functionality as a load-bearing for articular joint system beyond material testing, which has mainly focused on time-dependent reaction force and deformation in relatively small and low speed compression. Recently, the biphasic FE model for reciprocating sliding motion was applied to confirm the frictional effect on the migrating contact area. The results indicated that the model of a cylindrical indenter sliding over the cartilage surface remarkably sustained the higher proportion of fluid load support than a condition without migrating contact area, but the effectiveness of constitutive material properties has not been sufficiently evaluated for sliding motion. In our present study, at the first stage, the compressive response of the articular cartilage was examined by high precision testing machine. Material properties for the biphasic FE model, which included inhomogeneous apparent Young's modulus of solid phase along depth, strain-dependent permeability and collagen reinforcement in tensile strain, were estimated in cylindrical indentation tests by the curve fitting between the experimental time-dependent behavior and FE model simulation. Then, the biphasic lubrication mechanism of the articular cartilage including migrating contact area was simulated to elucidate functionality as a load-bearing material. The results showed that the compaction effect on permeability of solid phase was functional particularly in the condition without the migrating contact area, whereas in sliding condition the compaction effect did not clearly show its role in terms of the proportion of fluid load support. The reinforcement of solid phase, which represented the collagen network in the tissue, improved the proportion of fluid load support especially in the sliding condition. Thus, a functional integration of constitutive mechanical properties as a load-bearing was evaluated by FE model simulation in this study.     

Controller design of desktop-size NC machine tool with multi-application function

In this paper, a desktop-size NC machine tool is first presented to have multi-application function, such as 3D-machining modes with and without handling a machining force, and profiling-control modes with and without using stick-slip motion. The NC machine tool consists of three single-axis devices with a high resolution of 1???m in position. A ball end mill called router bit or a thin wood-stick tool can be attached to the tip of the z-axis. The proposed machine tool realizes compliant motion required for the profiling control along a desired trajectory. The profiling-control mode can be applied to the lapping process of a metallic LED lens cavity. Next, a control strategy with fine stick-slip motion is further added to the profiling-control system to improve the lapping performance. The fine stick-slip motion is generated orthogonally to the direction of the tool movement. Generally, the stick-slip motion is an undesirable phenomenon to be eliminated in precision machineries. However, the proposed machine tool employs the fine stick-slip motion to partly regulate slight finishing energy. The effectiveness of the machine tool is demonstrated through an actual machining test of a wood material and a lapping test of a metallic LED lens cavity.     

Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication

Water lubrication using diamond-like carbon (DLC) coatings is regarded as being a promising eco-friendly technology. However, it has been reported that delamination of DLC coatings occurs in water. The authors clarified that the application of friction in ambient air prior to self-mating DLC water lubrication, in addition to the suppression of DLC delamination, caused the friction coefficient to decrease more than when no processing is performed in the boundary lubrication region. When compared to the case when there was no pre-sliding, in terms of the wear scar, in this case, a much more hydrophilic and smoother surface was formed. Therefore, the friction-reducing process in water due to the presence of a sliding history (pre-sliding in ambient air) was clarified by an analysis of the DLC geometry, structure, chemical state and an in situ analysis that can measure the friction properties and the chemical state of DLC. We clarified that the process in which the oxidation and structural changes of the DLC proceed at the time of pre-sliding in ambient air using in situ Fourier transform infrared spectroscopy–attenuated total reflection. It was also revealed that the OH termination subsequently accelerated rapidly due to the friction in water after pre-sliding process. In addition, a time-of-flight secondary ion mass spectrometry analysis revealed that this OH group was derived from the lubricating water and unlike the case in which there was no pre-sliding in ambient air, the rate at which OH terminates increased considerably.     

Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Partial oxidation of ethane to synthesis gas over Co-loaded catalysts

Attention has been increasingly paid to the partial oxidation of lower alkanes to synthesis gas, due to its intrinsic energy saving process. We studied the partial oxidation of ethane (POE) on Co loaded on various supports. The POE performance varied as follows: Y₂O₃, CeO₂, ZrO₂, La₂O₃  SiO₂, Al₂O₃, TiO₂ > MgO. Comparing Y₂O₃ and CeO₂, the carbon deposition during the POE was negligible on CeO₂ and therefore CeO₂ was the most preferable support. By changing space velocity and O₂ partial pressure, reaction mechanism of POE was studied and it was revealed that two-step mechanism was prevailing; combustion of ethane to H₂O and CO₂ and subsequent reforming of ethane with H₂O and CO₂ to synthesis gas. Co/CeO₂ catalyst exhibited high and stable catalytic activity for 10 h; high ethane conversion of 18% (maximum ethane conversion 20% at O₂/C₂H₆ = 0.2) with H₂ and CO selectivities of 93 and 84%, respectively.