Melatonin-Induced Postconditioning Suppresses NMDA Receptor through Opening of the Mitochondrial Permeability Transition Pore via Melatonin Receptor in Mouse Neurons

Mitochondrial membrane potential regulation through the mitochondrial permeability transition pore (mPTP) is reportedly involved in the ischemic postconditioning (PostC) phenomenon. Melatonin is an endogenous hormone that regulates circadian rhythms. Its neuroprotective effects via mitochondrial melatonin receptors (MTs) have recently attracted attention. However, details of the neuroprotective mechanisms associated with PostC have not been clarified. Using hippocampal CA1 pyramidal cells from C57BL mice, we studied the involvement of MTs and the mPTP in melatonin-induced PostC mechanisms similar to those of ischemic PostC. We measured changes in spontaneous excitatory postsynaptic currents (sEPSCs), intracellular calcium concentration, mitochondrial membrane potential, and N-methyl-D-aspartate receptor (NMDAR) currents after ischemic challenge, using the whole-cell patch-clamp technique. Melatonin significantly suppressed increases in sEPSCs and intracellular calcium concentrations. The NMDAR currents were significantly suppressed by melatonin and the MT agonist, ramelteon. However, this suppressive effect was abolished by the mPTP inhibitor, cyclosporine A, and the MT antagonist, luzindole. Furthermore, both melatonin and ramelteon potentiated depolarization of mitochondrial membrane potentials, and luzindole suppressed depolarization of mitochondrial membrane potentials. This study suggests that melatonin-induced PostC via MTs suppressed the NMDAR that was induced by partial depolarization of mitochondrial membrane potential by opening the mPTP, reducing excessive release of glutamate and inducing neuroprotection against ischemia-reperfusion injury.     

Melting attack of solid plates by a high temperature liquid jet — effect of crust formation

When a molten UO₂ jet impinges on a steel structure in a reactor vessel during a severe accident, the erosion rate of the steel by the molten UO₂ jet is expected to be limited considerably by a UO₂ crust layer forming on a molten steel substrate at the jet/steel plate interface. A series of simulation experiments was performed to study the melting behavior of solid plates by high temperature liquid jets and the effects of crust forming at jet/structure interface. In the first series of experiments, salt (NaCl) was selected as the jet material and tin (Sn) as the solid structure. The experiments were conducted with varying the jet diameter (10 30 mm) and jet temperature (900 1100°C). The jets were accelerated to a range of 3 5 m/s at the nozzle outlet by gravitational force and impinged perpendicularly to the solid plate underneath. Furthermore, to check the effects of the thermo-physical properties on the erosion behaviors, preliminary experiments were performed by using a molten Al₂O₃ jet ( 2200°C) impinging on stainless steel plate at room temperature. The erosion rates obtained in the present experiments were far less than the values predicted by an analytical solution that neglects the existence of a crust layer and its thermal effects. With the inclusion of the crust behavior in the model, the experimental results were predicted fairly well. From the present experiments, a Nusselt number of the turbulent heat transfer, which takes into account simultaneous melting and freezing in the impingement region of a molten jet, is correlated by a Reynolds number and a Prandtl number as follows: Nu_m = 0.0033 Re---Pr.In conclusion, the existence of a crust layer plays an important role in the erosion process of a solid plate by the molten fuel jet with high melting point as in a reactor situation.     

S-methylation in Parkinson's disease

We report thiolmethyltransferase (TMT) activity in RBC membrane preparations from patients with Parkinson's disease (PD), normal controls, and patients with symptomatic parkinsonism. Unlike previous reports, our report found no significant decrease in TMT activity in PD patients compared with normal controls. Low S-methylation capacity does not appear to be a risk factor for PD in Japanese patients.     

Clonal analysis of superficial depressed-type gastric carcinoma in humans

BACKGROUND: An important unanswered question concerning the histogenesis of superficial-type gastric carcinoma is whether it is monoclonal or multiclonal in origin. Therefore, the authors analyzed multiple areas of each cancer with a clonality assay based on trinucleotide repeat length polymorphism of the human androgen receptor gene (HUMARA) that was subject to random inactivation of X chromosomes. METHODS: The HUMARA assay was applied to 15 gastric carcinomas, early and advanced stage, manifested in superficial, depressed lesions of various sizes and at least some signet ring cells. DNA was extracted from fresh frozen and formalin fixed tumor tissues that were microdissected from the mucosal lesions, and the HUMARA locus was amplified by polymerase chain reaction with and without prior digestion of nonmethylated DNA with Hpa II. The amplified DNA samples were loaded on polyacrylamide gels, electrophoresed, and visualized by a silver-staining method. RESULTS: In the 15 cases examined, 9 cancers were informative (had features of the types sought in this study), and in these 9 cancers a total of 57 areas were analyzed. In 7 of the 9 cancers, the inactivated allele was common to all the informative areas of each tumor, irrespective of the macroscopic shape of the tumor or the degree of histologic heterogeneity within it. In one of the two remaining cancers, the inactivated allele of one of the areas examined was different from those in the other areas. CONCLUSIONS: Most of the superficial depressed-type gastric carcinomas in this study were demonstrated to be of monoclonal origin. This finding supports a notion expressed previously in the literature that superficial-type carcinoma has a long natural history, and it indicates that efforts to detect gastric carcinomas in early stages to improve patients' survival should be encouraged.     

Junction properties of polypyrrole containing a small amount of poly(ethylene oxide) with indium

A method to generate a porous region near the surface of a polymer is suggested. In this method the region near the surface is swollen by immersing the polymer for a short time in a solvent. Subsequently, the polymer is introduced in a nonsolvent (for the polymer) that is, however, miscible with the solvent. The formation of the porous region is a result of (1) the swelling accompanied by the disentanglement of the surface molecular chains, and the dissolution of some of them during the immersion in the solvent, and (2) the rapid extraction of the solvent from the swollen region by the nonsolvent. The porous surface provides a matrix into which a second incompatible monomer can be polymerized so that the two otherwise incompatible polymers can adhere to one another.     

Effects of support and additive on oxidation state and activity of Pt catalyst in propane combustion

The effects of support and additive on the oxidation state and catalytic activity of Pt catalyst in the low temperature propane combustion were systematically investigated on Pt/MgO, Pt/Al₂O₃ and Pt/SiO₂–Al₂O₃. The catalytic activity varied much with both support materials and additives. The catalyst on the more acidic support showed higher activity, and the catalytic activity on every support materials increased as the electronegativity of additives increased, while some additives decreased the activity. The oxidation state of platinum, estimated by white line intensity of Pt L_III-edge XANES spectrum, also varied with the support and additives, and additives with higher electronegativity greatly prevented the platinum from its oxidation under oxidising atmosphere. Among almost all the catalysts with various supports and various additives, a clear relationship was observed between the oxidation state of platinum and the catalytic activity; the more metallic platinum showed higher activity. Thus, it was concluded that the total electrophilic/electrophobic property derived from those of the support and additive controls the oxidation state of platinum, which intensively affects the catalytic activity; i.e. higher electrophilic property provides less oxidised platinum, resulting in high catalytic activity. The mechanism of this effect was also discussed on the basis of thermochemical data, and it was proposed that the electrophobic materials promote the noble metal oxidation since the noble metal oxo-anion such as PtO^δ− is more stabilised with electrophobic cation.     

Morphology and Mechanical Properties in Polymer Blends of Photocurable Polymer and Polycarbonate

Relationships between the morphologies and mechanical properties of binary blends of a photocurable polymer (2‐propenoic acid, (octahydro‐4,7‐methano‐1H‐indenediyl) bis(methylene)ester; DCA) and a linear polymer (poly(4,4′‐cyclohexylidene bisphenol carbonate); PCz) have been investigated. The blend films are prepared by in situ photopolymerization of homogeneous mixtures of a DCA‐monomer and PCz. The phase structure has been converted from a semi‐interpenetrating polymer networks (semi‐IPN) structure to a bicontinuous structure by controlling the cure temperature. Bicontinuous phase‐separated structures can be obtained by curing a wide range of compositions of 17–50 wt.‐% PCz at high temperatures. Miscible semi‐IPN structures are attained by means of photopolymerization below the glass transition temperature of the homogenous mixture before performing photoirradiation, such that magnetic relaxation measurements showed the blend to be miscible in the 10 nm order. The tensile strength and modulus reached a maximum in those blends having an intermediate vague phase structure between semi‐IPN and bicontinuous structures that have a strong interfacial interaction, which leads to incomplete phase decomposition in the PCz‐rich matrix phase. The maximum strength and modulus prepared under optimum condition are inferior to those of the individual components. In contrast, the elongation and break energy are greatly improved in those blends with bicontinuous structures having a diffused phase boundary.

DCA‐rich domain size in bicontinuous structure for DCA/PCz system, as a function of cure temperature; (□) 17 wt.‐% PCz, (○) 30 wt.‐% PCz, and (?) 50 wt.‐% PCz.     

Estimation of the Surface Energy of Polymer Solids

The methods to estimate the surface tension of polymer solids using contact angles have been reviewed in the first part. They are classified into the following three groups depending on the theories or the equations applied: (1) the methods using the Young's equation alone, (2) the methods using the combined equation of Young and Good-Girifalco, and (3) the methods using the equations of work of adhesion. Some notes and comments are given for each method and results are compared with each other. The two-liquids method for rather high energy surface is also introduced.

Next, some new possibilities to evaluate the surface tension of polymer solids are presented by our new contact angle theory in consideration of the friction between a liquid drop and a solid surface. The advancing and receding angles of contact (θ _a and θ _r ) are explained by the frictional tension γ_F and accordingly two kinds of the critical surface tension γ_C (γ_Ca and γ_Cr ) are given.

This work has shown that one of the recommendable ways to evaluate γ_S is either the maximum γ_LV cos θ_a or the maximum γ_C using the advancing contact angle θ_a alone, and another way is the arithmetic or the harmonic mean of the γ_Ca and γ_Cr . A depiction to determine the γ_C such as ln(1 + cos θ₀ ) vs. γ_LV with cos θ₀ = (cos θ₀ + cos θ_r )/2 has also been proposed.     

Self-Assembling Properties and Recovery Effects on Damaged Skin Cells of Chemically Synthesized Mannosylerythritol Lipids

Mannosylerythritol lipids (MELs), which are one of the representative sugar-based biosurfactants (BSs) produced by microorganisms, have attracted much attention in various fields in the sustainable development goals (SDGs) era. However, they are inseparable mixtures with respect to the chain length of the fatty acids. In this study, self-assembling properties and structure-activity relationship (SAR) studies of recovery effects on damaged skin cells using chemically synthesized MELs were investigated. It was revealed, for the first time, that synthetic and homogeneous MELs exhibited significant self-assembling properties to form droplets or giant vesicles. In addition, a small difference in the length of the fatty acid chains of the MELs significantly affected their recovery effects on the damaged skin cells. MELs with medium or longer length alkyl chains exhibited much higher recovery effects than that of C18-ceramide NP.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.