Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Effect of oxygen on the wettability of sapphire by liquid palladium

The surface tension of liquid palladium and the contact angle between liquid palladium and sapphire have been measured at 1833 K as a function of oxygen pressure by the sessile drop method. Oxygen acted as a surface-active element on the surface of liquid palladium and at the interface between liquid palladium and sapphire, resulting in the decrease of the surface tension and the contact angle. The work of adhesion calculated from their values increased with increasing oxygen pressure, and had a constant value above 400 Pa. The maximum excess concentration of oxygen was estimated to be 7.3×10^–6 mol m^–2 for the surface and 6.9×10^–6 mol m^–2 for the interface.     

An application of rapid freezing,freeze substitution–fixation for scanning electron microscopy

A combined technique of the rapid freezing, freeze substitution–fixation method and the osmium–DMSO-osmium method was devised. By this combined method we clearly observed the architecture of intracellular components in three dimensions. Morphological characteristics were generally similar to those of tissue prepared by the osmium–DMSO-osmium method but different in some respects. Mucigen droplets in intestinal goblet cells, for example, appeared as separated spheres, while in specimens prepared by chemical fixation they were observed as a mass of fused droplets. In the Golgi complex, all cisternae were extremely flat, although they usually dilated on the cis side after chemical fixation. Particles on the mitochondrial tubules of liver cells were well distinguished. They were mushroom shaped, as are those observed by negative staining. The combined method, that is, the rapid freezing, osmium–DMSO-osmium method, is thought to be effective for studying the true structure of intracellular components by scanning electron microscopy.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

Hyperperfusion syndrome following carotid endarterectomy: evaluation using diffusion-weighted magnetic resonance imaging--case report

OBJECTIVE: Epidemiological evidence suggests that resistance to insulin is the common nexus of the accumulation of factors in patients at high cardiovascular risk. To find a test which enables resistance to insulin to be identified in large populations will allow preventive and therapeutic measures to be taken. DESIGN: Crossover. SETTING: Carrascosa del Campo and Cuenca Health Centres. PARTICIPANTS: 408 patients (154 men and 254 women), all the non-diabetic obese patients at the two health centres, were studied. MEASUREMENTS AND MAIN RESULTS: Levels of cholesterol, triglycerides and uric acid were measured. Patients were medically examined, and blood pressure, waist and hip measurements, toxic habits and cardiovascular history were found. They were classified by pathology and normograms. The O'Sullivan and microalbuminuria tests were performed, and all the statistical associations with biochemical and medical characteristics were studied. The O'Sullivan test was significantly associated (p < 0.01) with cardiovascular risk and insulin-resistance factors such as hypercholesterolaemia (RR 1.63), hypertension (RR 1.92), hypertriglyceridaemia (RR 2.47), hyperuricaemia (RR 1.80), with the Berglund resistance index (RR 1.52) and the microalbuminuria test (RR 1.83). The association was more consistent when there were a number of factors combining. There was no relationship with the waist/hip index found. CONCLUSION: The O'Sullivan test, on its own or with the microalbuminuria test, seems very useful for identifying obese subjects with resistance to insulin.     

Mechanical behaviour and formulation of stress-strain relation for non-linear viscoelastic cellulose nitrate under cyclic loadings

The cyclic deformations under various repeated stresses are quantitatively investigated using non-linear viscoelastic cellulose nitrate heated to 60° C. The non-elastic strain or creep-plastic strain is remarkably influenced by the repeated stress and the stress rate. The cyclic deformations corresponding to the repeated stress less than a certain stress level attain the saturated state called the shake down after some cycles. The stress-strain relations of the non-linear viscoelastic media in the loading and unloading processes are deduced from the invariant theory using an hypothesis of creep potential. The non-linear viscoelastic observations obtained on the cellulose nitrate at 60° C under cyclic loadings are found to fit the deduced relations for the loading and unloading processes independent of the repeated stress and the stress rate.     

Drawing plane graphs nicely

Summary This paper presents two efficient algorithms for drawing plane graphs nicely. Both draw all edges of a graph as straight line segments without crossing lines. The first draws a plane graph convex if possible, that is, in a way that every inner face and the complement of the outer face are convex polygons. The second, using the first, produces a pleasing drawing of a given plane graph that satisfies the following property as far as possible: the complements of 3-connected components, together with inner faces and the complement of the outer face, are convex polygons. The running time and storage space of both algorithms are linear in the number of vertices of the graph.     

Pulsed NMR study in nuclear ordered solid3He

The nuclear spin dynamics in nuclear spin ordered solid³He in low magnetic fields on the melting curve has been studied by pulsed NMR down to 0.6 mK. The free induction decay signals (FID) were measured in single crystals of solid³He at three operating frequencies of 920, 1380, and 1840 kHz. The FIDs were nonexponential and dependent on the rf pulse strength _p H ₁ t _w , where is the gyromagnetic ratio,H ₁ is the rf field strength, andt _w is the pulse width. At small _p they decayed almost linearly in time with a small exponential tail at the end. When _p was further increased they became shorter and neither exponential nor linear in time. At large _p they decayed very rapidly and sometimes could not be observed at all because of the dead time of the NMR detection system. Such behavior of the FID was observed in many different single crystals in the given temperature range at 920 kHz. Tsubota and Tsuneto have shown by solving the nonlinear equations of motion numerically that the motion of the nuclear spin becomes chaotic when the tipping angle exceeds a critical value. Comparing their result with our experimental results, we concluded that some of the results of the rapid decay of the FID at large _p might be attributed to the onset of the chaotic motion. At 1840 kHz it is expected that the nonlinear effects in the equations of motion become less effective than that at 920 kHz. In fact, at this operating frequency the FIDs even at large _p and the tipping angle-dependent frequency shift could be observed. These frequency shifts were in rather good agreement with Namaizawa's theory provided an effective tipping angle was taken into account.