Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Integrable multimode interference distributed Bragg reflector laser all-optical flip-flops

A novel fully integrable all-optical flip-flop has been created using distributed Bragg reflector multimode interference bistable laser diodes. The single metal-organic vapor phase epitaxy regrowth offset quantum well structure active/passive integrated flip-flop lases in single mode at 1554 nm and is compatible with standard fabrication methods of InP photonic integrated circuits (PICs). All-optical reset switching through cross-gain saturation was demonstrated over a 52-nm range, at 1522-1574 nm. An optical set has been achieved with -3 dBm and optical reset with less than -5-dBm external light injection. The flip-flop will be useful for integration in PICs of future photonic systems for self-routing and optical memories or buffers.     

Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing

The authors and Hitachi Cable, Ltd. have recently developed small-diameter optical fiber and its fiber Bragg grating (FBG) sensor for embedment inside a lamina of composite laminates without strength reduction. The outside diameters of the cladding and polyimide coating are 40 and 52 μm, respectively. First, a brief summary is presented for applications of small-diameter FBG sensors to damage monitoring in composite structures. Then, we propose a new damage detection system for quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing. In this system, a piezo-ceramic actuator generates Lamb waves in a CFRP laminate. After the waves propagate in the laminate, transmitted waves are received by an FBG sensor attached on or embedded in the laminate using a newly developed high-speed optical wavelength interrogation system. This system was applied to detect interlaminar delamination in CFRP cross-ply laminates. When the Lamb waves passed through the delamination, the amplitude decreased and a new wave mode appeared. These phenomena could be well simulated using a finite element analysis. From the changes in the amplitude ratio and the arrival time of the new mode depending on the delamination length, it was found that this system could evaluate the delamination length quantitatively. Furthermore, small-diameter FBG sensors were embedded in a double-lap type coupon specimen, and the debonding progress could be evaluated using the wavelet transform.     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

Business process integration as a solution to the implementation of supply chain management systems

In the domain of supply chain management (SCM), various software packages have been developed for planning business strategies. To solve the problem of system productivity in applying planning packages, we propose a solution concept, business process integration (BPI), which fuses workflow and enterprise application integration (EAI) technology. Two characteristic policies are included in BPI. The first is to design the minimum set of business processes for real-time information sharing with planning packages without changing other processes. The second is to integrate several systems with EAI technology and to manage their execution with a workflow tool. Based on these policies, we propose various design templates and integration adapters. Our evaluation shows that using BPI, a target system can be developed with less manpower, in less time, and with higher quality than previous methods.     

On the computational power of insertion-deletion systems

Gene insertion and deletion are basic phenomena found in DNA processing or RNA editing in molecular biology. The genetic mechanism and development based on these evolutionary transformations have been formulated as a formal system with two operations of insertion and deletion, called insertion-deletion systems (Kari and Thierrin, 1996; Kari et al., 1997).We investigate the generative power of insertion-deletion systems (InsDel systems), and show that the family INS ¹ ₁ DEL ¹ ₁ is equal to the family of recursively enumerable languages. This gives a positive answer to an open problem posed in Kari et al. (1997) where it was conjectured contrary. This revised version was published online in June 2006 with corrections to the Cover Date.     

Complete Mining of Frequent Patterns from Graphs: Mining Graph Data

Basket Analysis, which is a standard method for data mining, derives frequent itemsets from database. However, its mining ability is limited to transaction data consisting of items. In reality, there are many applications where data are described in a more structural way, e.g. chemical compounds and Web browsing history. There are a few approaches that can discover characteristic patterns from graph-structured data in the field of machine learning. However, almost all of them are not suitable for such applications that require a complete search for all frequent subgraph patterns in the data. In this paper, we propose a novel principle and its algorithm that derive the characteristic patterns which frequently appear in graph-structured data. Our algorithm can derive all frequent induced subgraphs from both directed and undirected graph structured data having loops (including self-loops) with labeled or unlabeled nodes and links. Its performance is evaluated through the applications to Web browsing pattern analysis and chemical carcinogenesis analysis.     

Shape from Shading with Interreflections Under a Proximal Light Source: Distortion-Free Copying of an Unfolded Book

We address the problem of recovering the 3D shape of an unfolded book surface from the shading information in a scanner image. This shape-from-shading problem in a real world environment is made difficult by a proximal, moving light source, interreflections, specular reflections, and a nonuniform albedo distribution. Taking all these factors into account, we formulate the problem as an iterative, non-linear optimization problem. Piecewise polynomial models of the 3D shape and albedo distribution are introduced to efficiently and stably compute the shape in practice. Finally, we propose a method to restore the distorted scanner image based on the reconstructed 3D shape. The image restoration experiments for real book surfaces demonstrate that much of the geometric and photometric distortions are removed by our method.